Latest crc sheet Tenders | Government crc sheet Tenders

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

CTN :38508599

18 Dec, 2024 2.34 Lacs

Srinagar - Jammu And Kashmir

Tender For s/i of additional safety items for krishi radio station at main campus shalimar, skuast-k.(capex) - fire detection & alarm system, supplying, installation, testing & commissioning sector control panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per is:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required., 4 zone, supplying, installation, testing & commissioning of heat detector each operating at 54 c/57 c with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required., supplying, installation, testing & commissioning of smoke detector each with builtin led and mounting base complete with all connections etc. as required., supplying, installation, testing & commissioning of manual call each boxes of ms construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as recuired, supplying, installation, testing & commissioning response indicator each on surface/recess ms box having two leds metallic cover complete with all connections etc. as required., supplying, installation, testing & commissioning fire alarm sounder each with facility to make announcement, mounted in a.b.s. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required., supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with p.t.t. knob & speaker/microphone enclosed in a m.s.(16 swg)/ abs box with break glass in front etc. complete as required., supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000v rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable ethylene propylene rubber (epr) insulation and lszh inner bedding, steel wire armouring & lszh outer sheath complete as required., supplying and fixing of co2 type fire extinguisher isi marked confirming to is: 15683 capacity 4.5 kg complete with delivery hose horn, squeeze grip release valve , locking arrangement, operation manual, bracket with two screw and sleeve including transportation cartage upto various post in kashmir region of sib as per anexure attached etc complete as required. (make : life guard/minimax/safeguard), providing and fixing abc type (dry power type ) extinguisher as per is: 15683 consisting of welded ms cylindrical body, with discharge hose, discharge valve, suspension bracket, initial filling, pressure gauge including transportation cartage upto various post in kashmir region of sib as per anexureattached.etc complete as required. (make : life guard/minimax/safeguard), capacity 6 kg., fabrication, supply, installation, testing & commissioning of indoor type compartmentalized feeder pillar having front area not less than 0.60 sqmtr (900 mm x 900 mm) and depth 45 cm (ns) made out of 2mm thick crca sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 400 amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor pvc insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd.details as under panel powder coated 2.0mm mccb 160 a 4p 50ka , ther

CTN :38363368

18 Dec, 2024 NA

Mumbai - Maharashtra

Tender For sitc of various essential equipments for the use of various municipal maternity homes - 200/250 amp. 415v tpn switchfuse unit with crca sheet steel powder coated enclosure with hrc fuses & switch links and padlockable arrangement., cable end boxes 200/250 amp. tpn switch fuse, 200 amp. 415v fp on load changeover switch with crca sheet steel powder coated enclosure., supply, installation, testing and commissioning of 50kva dg set comprising of cpcb iv mech, built in amf panel, 1500 rpm, 4 stroke, 3 cylinder inline type, water cooled with radiator diesel, 1st category al armoured cables frls outer sheathed- 3.5c x 95 sq.mm, cable end termination for aluminium cables 3.5c x 95 sq.mm, 3 noss. single core cu pvc insulated flexible cable of 50 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 25 sq.mm for 100/125 amp. tpnss switch., cement concrete foundation using m-20 cement concrete mix with j shaped foundation bolts where required, supply & laying of double wall corrugated ( dwc) pipe 125 mm od / 109 mm i.d., concrate excavating the trenches and refilling the same after the cable is laid in approved manner (size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 cu. mtr. = 2.2 rmt., soil excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 cu. mtr. = 2.2 rmt., providing, detailing, composite fabricating members like trusses, ngirders,girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using m.s. hollow tubular steel, bare galvalume/zincalume sheets for roofing, earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate, 25 x 3mm gi, bare g. i. conductor size 10 swg., removal of switchgears/ dbs upto 200 amp., removal of switchgears/ dbs above 200 amp to 400 amp., removal of busbar chamber above 100 amp tpn to 800 amp tpn., removal of cable above 3-1/2 core x 35 sq. mm. to 3-1/2 core x 70 sq. mm, removal of cable from 1.5 sq.mm to 3-1/2 core x 35 sq.mm., refixing of 2 core/ 3 core/ 3-1/2 core / 4 core/ 6 core copper / aluminium conductor armoured / unarmoured cable 1.5 sq.mm. to 16 sq.mm. size on wall / ceiling etc., refixing of 2 core / 3 core / 3-1/2 core / 4 core/ 6 core copper / aluminium conductor armoured / unarmoured cable above 16 sq.mm. to 150 sq.mm. size on wall / ceiling etc., 415v main distribution panel 1 short circuit reating 50ka for 1 sec. 400a (thermal magnetic overload, short circuit release) mccb with rotary operating mechanism as incomer with digital ammeter,, 200a 4p mccb, 100a tpn mccb, 3 noss. single core cu pvc insulated flexible cable of 95 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 50 sq.mm for 200 amp tpnss switch., g.i. cable tray with all other accessories 150 x 25mm (w x h) - (16 swg - 1.6mm) without cover, cable end termination for aluminium cables 3.5c x 50 sq.mm, cable end termination for aluminium cables 3.5c x 120 sq.mm, cable end termination for aluminium cables 3.5c x 70 sq.mm, cable end termination for aluminium cables 3.5c x 50 sq.mm, 20w led flood light luminaire ip65, 1st category al armoured cables frls outer sheathed- 2c x 6.0 sq.mm, gun metal gate valves (screwed):-50 mm dia., gun metal non - return valve: (screwed):-50 mm dia., gun metal gate valves (screwed):-15 mm dia., gun metal foot valve 50 mm dia., automatic pump control panel, hose oil cooler to water pump, worm drive hose, fuel supply pipe, injector overflow pipe (return pipe), hose for oil cooler inlet, hose clip thermostat, vent hose (epdm) for gens, ax-45-cogged belt, hose water manifold to ther, dse 6120/ 4520 controller, battery exide 12v 110ah, oil filter 4 cyl -, fuel filter 4 cyl -, air filter element outer 4 cly m&m, centrifugal oil filter 4c, radiator aluminium, radiator exhaust fan, radiator core, charging alternator, alternator winding main, alternator ar

CTN :38432698

30 Dec, 2024 NA

Multi City - Multi State

Tender For supply, erection, testing & commissioning of apfc panel panel 415v, 3 phase , frequency 50 hz, 50 ka, enclosure should be fabricated in 2mm crca sheet with ip 42 protection with all accessories. the apfc panel shall be rated 200 kvar, including 400a mccb, 36ka as incoming 12 stage microprocessor based relay, consisting of 25 kvar, 10 kvar, 5kvar capacitor bank sets harmonic filters.

CTN :38388172

18 Dec, 2024 NA

Mumbai - Maharashtra

Tender For sitc of various essential equipments for the use of various municipal maternity homes - 200/250 amp. 415v tpn switchfuse unit with crca sheet steel powder coated enclosure with hrc fuses & switch links and padlockable arrangement., cable end boxes 200/250 amp. tpn switch fuse, 200 amp. 415v fp on load changeover switch with crca sheet steel powder coated enclosure., supply, installation, testing and commissioning of 50kva dg set comprising of cpcb iv mech, built in amf panel, 1500 rpm, 4 stroke, 3 cylinder inline type, water cooled with radiator diesel, 1st category al armoured cables frls outer sheathed- 3.5c x 95 sq.mm, cable end termination for aluminium cables 3.5c x 95 sq.mm, 3 noss. single core cu pvc insulated flexible cable of 50 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 25 sq.mm for 100/125 amp. tpnss switch., cement concrete foundation using m-20 cement concrete mix with j shaped foundation bolts where required, supply & laying of double wall corrugated ( dwc) pipe 125 mm od / 109 mm i.d., concrate excavating the trenches and refilling the same after the cable is laid in approved manner (size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 cu. mtr. = 2.2 rmt., soil excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 cu. mtr. = 2.2 rmt., providing, detailing, composite fabricating members like trusses, ngirders,girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using m.s. hollow tubular steel, bare galvalume/zincalume sheets for roofing, earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate, 25 x 3mm gi, bare g. i. conductor size 10 swg., removal of switchgears/ dbs upto 200 amp., removal of switchgears/ dbs above 200 amp to 400 amp., removal of busbar chamber above 100 amp tpn to 800 amp tpn., removal of cable above 3-1/2 core x 35 sq. mm. to 3-1/2 core x 70 sq. mm, removal of cable from 1.5 sq.mm to 3-1/2 core x 35 sq.mm., refixing of 2 core/ 3 core/ 3-1/2 core / 4 core/ 6 core copper / aluminium conductor armoured / unarmoured cable 1.5 sq.mm. to 16 sq.mm. size on wall / ceiling etc., refixing of 2 core / 3 core / 3-1/2 core / 4 core/ 6 core copper / aluminium conductor armoured / unarmoured cable above 16 sq.mm. to 150 sq.mm. size on wall / ceiling etc., 415v main distribution panel 1 short circuit reating 50ka for 1 sec. 400a (thermal magnetic overload, short circuit release) mccb with rotary operating mechanism as incomer with digital ammeter,, 200a 4p mccb, 100a tpn mccb, 3 noss. single core cu pvc insulated flexible cable of 95 sq.mm. for phases & 1 single core cu pvc insulated flexible cable for neutral of 50 sq.mm for 200 amp tpnss switch., g.i. cable tray with all other accessories 150 x 25mm (w x h) - (16 swg - 1.6mm) without cover, cable end termination for aluminium cables 3.5c x 50 sq.mm, cable end termination for aluminium cables 3.5c x 120 sq.mm, cable end termination for aluminium cables 3.5c x 70 sq.mm, cable end termination for aluminium cables 3.5c x 50 sq.mm, 20w led flood light luminaire ip65, 1st category al armoured cables frls outer sheathed- 2c x 6.0 sq.mm, gun metal gate valves (screwed):-50 mm dia., gun metal non - return valve: (screwed):-50 mm dia., gun metal gate valves (screwed):-15 mm dia., gun metal foot valve 50 mm dia., automatic pump control panel, hose oil cooler to water pump, worm drive hose, fuel supply pipe, injector overflow pipe (return pipe), hose for oil cooler inlet, hose clip thermostat, vent hose (epdm) for gens, ax-45-cogged belt, hose water manifold to ther, dse 6120/ 4520 controller, battery exide 12v 110ah, oil filter 4 cyl -, fuel filter 4 cyl -, air filter element outer 4 cly m&m, centrifugal oil filter 4c, radiator aluminium, radiator exhaust fan, radiator core, charging alternator, alternator winding main, alternator ar

CTN :38322788

27 Dec, 2024 NA

Bhopal - Madhya Pradesh

Tender For iehe invites online tender for supply of furniture (psychology department) - furniture, almirah steel shelving cabinets - almirah steel (conforming to bis specification is: 3312:2021 (with latest amendment)), type (almirah steel shelving cabinets),number of door (2), number of drawers (no drawer),number of shelves (4), colour of finish (prince grey),steel sheet material (crca sheets conforming to grade cri of is 513(part-1): 2016 ),almirah height (excluding the height of pedestal) 5 mm (1855 mm), almirah width 5 mm (910 mm),almirah depth 5 mm (480 mm), side sheet thickness (0.8 mm),back sheet thickness (0.8 mm), top sheet thickness (0.8 mm),bottom sheet thickness (0.8 mm),shelves sheet thickness (0.8 mm), hinges sheet thickness (1.25 mm (double folded)),width of stiffener (115 mm), stiffener sheet thickness (0.8 mm),handle size (12 cm), steel almirah lock/locker lock (six lever lock),material of lock (brass and steel finish),powder coating (conforming to is: 13871), almirah steel with glass door - almirah steel (conforming to bis specification is: 3312:2021), type (almirah steel with glass door),number of door (2), number of shelves (4),colour of finish (silver grey), steel sheet material (crca sheets conforming to grade cri of is 513(part-1): 2016 ),almirah height 5 mm (1980 mm (excluding the height of pedestal)),almirah width 5 mm (920 mm), almirah depth 5 mm (490 mm),side sheet thickness (0.9 mm), back sheet thickness (0.8 mm),top sheet thickness (0.9 mm), bottom sheet thickness (0.9 mm),shelves sheet thickness (0.7 mm),shelves supporting bracket thickness (1.6 mm), hinges sheet thickness (1.6 mm),number of glass sheet fixed (4), handle size (12 cm),steel almirah lock/locker lock (six lever lock), powder coating (conforming to is: 13871), sofas & couches, number of seats - furniture assembly (already assembled), sofa features (sofa cum bed),material (bamboo), dimensions and size: (),length (1800 inch), width (900 inch),height (yes),technical specifications: (), color (yellow),style (modern), number of seats (1),furniture assembly (already assembled), sofa features (sofa cum bed),material (bamboo), cantilever office chair non-revolving and non-tilting chair with armrest - chair type (non-revolving and non-tilting chair with armrest), chair understructure type (cantilever),understructure material (erw tube conforming to is : 1161 latest), the shape of tubular section of understructure (square),section size (diameter/sides) of understructure (19x19 mm), understructure wall thickness (mm) (1.6),castor (no),seat material (pu foam), density of pu used in seat (kg per cubic meter) (>30=40),thickness of pu used in seat (mm) (>30=40), minimum seat height from floor surface (mm) (>400=500),width of seat (mm) (>450), depth of seat (mm) (>450),seat upholstery material (leatherette),backrest base frame material (hot pressed plywood), backrest material (pu foam),density of pu used in backrest (kg per cubic meter) (>30=40), thickness of pu used in backrest (mm) (>30=40),width of backrest (mm) (>450), backrest height from the seat level (>450=550),backrest upholstery material (leatherette),armrest type (moulded armrest continuously fitted with seat & back), office chair non-revolving and non-tilting chair with armrest- chair type (non-revolving and non-tilting chair with armrest),chair understructure type (legs), understructure material (erw tube conforming to is : 1161 latest),the shape of tubular section of under structure (round), section size (diameter/sides) of under structure (22 mm),understructure wall thickness (mm) (1.6),castor (no), seat material (moulded pu),density of pu used in seat (kg per cubic meter) (>30=40), thickness of pu used in seat (mm) (>30=40),minimum seat height from floor surface (mm) (>400=500), width of seat (mm) (>400=450),depth of seat (mm) (>400=450),seat upholstery material (leatherette), backrest base frame material (hot pressed plywood),backrest material (moulded pu), density of pu used in backres

Crc Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector