Latest crossing gate repair Tenders | Government crossing gate repair Tenders

Central Government And Public Sector

CTN :38605090

30 Dec, 2024 NA

Bongaigaon - Assam

Tender For supplying adhesive for applying over grooved rubber sole plates for plac ing over psc sleepers/steel sleepers especially under the points & crossing area (as pe r specification enclosed) [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :38599715

24 Dec, 2024 34.39 Lacs

Delhi - Delhi

Tender For improvement/ development of arjun nagar nallah crossing near h. no. j-192 and h. no. d-186 arjun nagar nallah by providing design mix rcc culverts and providing steel mesh at sides of nallah at harsukh marg culvert in ward no. 150/sz

CTN :38567851

18 Dec, 2024 NA

Likabali - Arunachal Pradesh

Tender For supply of pwi tool kit model no.tk-1- consisting 20 items as under: 1.shim feeler gauge, 2. clearance gauge, 3. points & crossing gauge model gx-1, 4.cap gauge, 5.staight gauge 100mm,6.versine measuring kit, 7. calipers, 8.magnifying glass,, 9.mirror,10.calculator,11.rail thermometer,12. steel tape 3 meter, 13.steel tape 20 meters, 14. steel scale, 15.tappered gauge, 16.stepped feeler gauge, 17. torch,18 .data book,19.spirit level model si-2,20.aluminium cant board [ warranty period: 30 months after the da te of delivery ]

CTN :38491980

21 Dec, 2024 NA

Rewa - Madhya Pradesh

Tender For tender for supply of consumable surgical material and implants for cardiology departments of ssb on consignment basis - description, ptca balloon catheter - predilataion semicompliant balloon ptca pre-dilatation, monorail/rapid exchange balloon (semi compliant). stainless steel hypotube shaft design, low entry profile ( 0.016 ) and 5f guide catheter compatibility.radio-opaque markers at both ends. diameters (mm): 1.0, 1.25, 1.5, 2.0, 2.5,3, 3.5, 4.0. length: 10 mm to 30 mm., ptca balloon catheter- predilataion semicompliant balloon: ultralow entry profile ptca pre-dilatation semi-compliant balloon, monorail/rapid exchange stainless steel hypotube shaft design,ultra-low entry profile ( 0.016 inch) with 5f guides catheter compatible, hydrophilic coating of the distal monorail part.radio-opaque marker for visibility. diameters (mm): 1.0, 1.2/1.25, 1.05, 2.0.length: 10 mm to 20 mm., ptca balloon catheter-predilataion scballoon: low entry profile00 ptca pre-dilatation semi-compliantballoon, lowest tip entry profile of 0.016 , crossing profile of 0.021 , zero fold or minimum fold with low profile and marker for better visibility, stepwise transition stiffening for more pushability for difficult to cross lesions.radio-opaque marker (single) at the center of the balloon in small diameter balloons. diameter (mm): 1.2/1.25, 1.5,2.0.length: minimum 6-8 mm to 12-15 mm., ptca balloon catheter- pre-dilatation scover the wire balloon ptca pre-dilatation semi-compliant overthe wire balloon (otw) with short balloon taper, low entry profile ( 0.016 ). diameter 1.2/1.25, 1.5,2.0,2.5, 3.0 mm or more. length minimum6-8 mm to 20mm or more., ptca balloon catheter- pre-dilatation semi-compliant cto balloon ptca pre-dilatation semi-compliant, monorail/rapid exchange balloon withlowest crossing profile for crossing difficult to cross cto lesions, having smallest balloon size of 0.8 0.1 mm diameter and length of 8 2 mm. othersizes available should be. diameter (mm): 1.2/1.25, 1.5.length (mm): 6/8, 10/12., ptca balloon catheter- post-dilatation highpressure nc balloon (rbp 16 atm) high pressure non-compliant balloon with 16 atm rbp, smooth, rounded distal tip and no edge over- dilatation athigher pressure; with least balloon overhang at the edges. available diameter(mm): 2.5, 3.0, 3.5, 4.length(mm): 10 to 30., ptca balloon catheter- post-dilatation highpressure nc balloon (rbp 18-20 atm) high pressure non-compliant balloon with low (0.018 ) lesion entry profile and 18-20 atm rbp, hydrophilic (distal tip to guidewire exit port) and hydrophobic (guidewire lumen) coating,5f guiding catheter compatible, smooth, rounded distal tip and no edge over-dilatation at higher pressure; with least balloon overhang at the edges.available diameter(mm): 1.75, 2.0, 2.5,2.75, 3.0, 3.5, 4. length(mm): 6- 8mmto 20 ., ptca balloon catheter- post-dilatation highpressure nc balloon (rbp 20-22 atm) high pressure non-compliant balloon with 20-22 atm rbp, hydrophilic coatingof the distal monorail part, 5f guiding compatible, smooth, rounded distal tip and no edge over-dilatation at higher pressure. available diameter(mm): 2, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4,4.5, 5.0. length(mm): minimum 6/8 mm to 30 mm., ptca balloon catheter- post-dilatation highpressure nc balloon (rbp 22 atm) high pressure non-compliant balloon with 22 atm rbp, 5f guiding compatible, smooth, rounded distal tipand no edge over-dilatation at higher pressure. available diameter(mm): 2, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4,4.5, 5.0. length(mm): minimum 6/8 mmto 30 mm., ptca balloon catheter- ultra-high pressurenon-compliant balloon ultra-high pressure non-compliant balloon with 30 atm rbp for highly fibrotic or calcific vessels, no edge over-dilatation at higher pressure; with leastballoon overhang at the edges. diameter(mm): 2.0, 2.5, 3.0, 3.5, 4. length(mm): minimum 6-8mm to 20mm.-balloon only, ptca balloon catheter- ultra-high pressure non-compliant balloon with inflation device ultra-high pressure n

Central Government/Public Sector

CTN :38494460

06 Jan, 2025 NA

Mumbai - Maharashtra

Tender For a) repairs to quarters including damaged and choked drainage system, 2 sewage line, water supply system and repairs to garden, damaged colony road, plaster, doors, windows, leaky roof etc. of all staff quarters at kjt, nrl, vgi, bud and abh under aden(t)kyn.b) painting of all service building & steel painting of all sheds, safety grill fencing cop shed etc. of all station between vldi-kjt under aden t kyn.c) painting of railway quarters between vldi-kjt under aden t kyn.z) a) repairs to level crossing gate lodgeon kyn-kjt & nrl-mae. b) repairs to s&t & ohe structure in mid section on kyn-kjt section. c) repairs to gang hut (07) on kyn-kjt section. d) painting of gate lodge, s&t structure, ohe structures in mid section on kyn-kjt section.

Central Government/Public Sector

CTN :38456986

26 Dec, 2024 40.00 Lacs

Kangra - Himachal Pradesh

Tender For repair/ replacement of lt underground cables and connected items in various locations at mil stn yol - excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., excavation in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cms thick in any type of soil complete all as specified and directed., removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed., pcc 1:3:6 (nominal mix) type c-2 (using 40mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified and directed., pcc 1:4:8 (nominal mix) type d-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed., sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cms thick, complete all as specified and directed note: punned thickness shall be measured., sub class b brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick including taking out old bricks, complete all as specified and directed., laying only bricks along the length of cable on sand cushioning, with width equal to the length of the brick , complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 80mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 50mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., dismantling poles/struts, any size and type including insulators and removing from site, complete all as specified., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 300 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 240 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 185 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe i

CTN :38452321

27 Dec, 2024 NA

Bokaro - Jharkhand

Tender For 1) extension of line no-4 by shifting of point and crossover no. 112 a/b towards bje end to get full length csl at santhaldih station in adra division.2) kotshila- bokaro steel city-ttr(cs+cmsc)-127sets and ttr(ds)-4 sets.3)renewal of 56 nos. of sej 4)adra division- ttr(tfr)-95 sets, ttr(tsr)-15 sets and ttr(tws+wcmsc)-24 sets 5)tfr between rui-bje-1.761tr. km, ksx-bksc- 4.05 tr. km and renewal of grsp from km 326.038 to 345.279km (29515 nos.) 6) renewal of ordinary cms crossing under the jurisdiction of den/north/adra

Central Government/Public Sector

CTN :38361430

24 Dec, 2024 NA

Bhopal - Madhya Pradesh

Tender For construction of railway portion of two lane road over bridge (1 x 72.00m bow string arch steel girder) at km. 157/22 - 24 in lieu of level crossing no. 79 in ujjain - bhopal section, between akodia - shujalpur stations of ratlam division western railway

Central Government/Public Sector

CTN :38361431

24 Dec, 2024 NA

Dewas - Madhya Pradesh

Tender For construction of railway portion of two lane road over bridge (1 x 60.00m bow string arch steel girder) at km. 63/09 - 10 in lieu of level crossing no. 45 in indore - dewas section, between barlai - mangliyagaon stations of ratlam division western railway

Central Government/Public Sector

CTN :38108970

23 Dec, 2024 NA

Bhusawal - Maharashtra

Tender For corrigendum : manufacturing and supply of 1 in 8.5 cms crossing bg for 52 kg rails on psc sleepers la yout to rdso drg. no. t-4867 alt-9 (latest alteration) complete with all fittings as listed in the drawing excluding fish plates, fish bolts,nylon cord reinforced grsp, metal liner, gfn liner, elastic rail clips and check rails as per irs/t-29(revised-2023) (latest alteration) for cast manganese steel crossing co mplete with relevant specifications for all parts. stages of inspection : stage 1 metallurgical & dimensi onal inspection after heat treatment and stage 2 final inspection (after machining). inspection in both the stages shall comply with provision of irs:t-29 (revised-2023) specification and relevant drawings. [ warranty period: 30 months after the date of delivery ]

Crossing Gate Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector