Web Analytics Made Easy - StatCounter

Crushed Aggregates Tenders

Get complete information related to latest Crushed Aggregates Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Crushed Aggregates Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Crushed Aggregates Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :39410742 Due date: 25 Feb, 202525 Feb, 2025 1.29 Lacs
Tender For work2earthwork in filling, digging a pit on the side of the road and lifting the soil 1.5 meters and taking it up to 50 meters, breaking the lumps and laying them in 25 cm layers and pressing and leveling and making camber. 1kmdurihard soillaying, spreading and tamping of gravel, kankar, quarry rubble and coarse aggregate not less than 15 cms thickness (without crushing) on ??the specified camber and grade of the road and tamping with the help of roller weighing 8-10 tons and including all lead, water charges and hire of tools and machinery.

State Government

CTN :39418321 Due date: 28 Feb, 202528 Feb, 2025 15.66 Lacs
Tender For providing and laying rubble stone at down stream side of end sill of gorathiya recharge scheme at takar ta.talod dist.s.k

CTN :39387314 Due date: 25 Feb, 202525 Feb, 2025 10.00 Crore
Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p

State Government

CTN :39256911 Due date: 10 Mar, 202510 Mar, 2025 12.27 Lacs
Tender For corrigendum : dry rubble masonry work in the collapsed area of compound wall near manopilly nagar at thrikkakara campus..

Central Government/Public Sector

CTN :39171274 Due date: 26 Feb, 202526 Feb, 2025 NA
Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

State Government

CTN :39383263 Due date: 03 Mar, 202503 Mar, 2025 84.62 Lacs
Tender For extracting & providing of rubble 15 cms. to 40 cms. size for govt. crusher from p.w.d. khadan to hoppers of government crushing plant at sevaliya

State Government

CTN :39394097 Due date: 05 Mar, 202505 Mar, 2025 22.55 Lacs
Tender For berm concrete,dry rubble masonry,mss

corporations/Associations/Others

CTN :39368312 Due date: 07 Mar, 202507 Mar, 2025 11.09 Crore
Tender For proposed development of chopati at veraval dist. gir-somnath (phase-2) - excavation for foundation up to 1.5 meter depth including sorting out and stacking of useful materials and disposing of excavated stuff up to any lead. (a) for loose or soft soil, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. (b) dense or hard soil, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. (c) hard murrum, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead. (d) soft rock not requiring blasting, filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (upto 10 ton), filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete., filling in foundation and plinth with black garden soil in any thickness completed., filling in foundation and plinth with black cotton soil in any thickness completed., filling in foundation and plinth with soft black cotton soil in any thickness completed., coursed rubble masonry with stone of approved quality in foundation and plinth in cement mortar 1:4 (1 cement : 4 course sand) etc. complete., providing and laying cement concrete 1:3:6 (1-cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size ) and curing complete excluding cost of form work in. (a) foundation and plinth, providing 100mm thick m-200 controlled cement concrete road using tremix vaccum dewatering system with providing and fixing & removing of "c" channel having size 75 x 75 mm as per required level slope and thickness of concrete and levelling and finishing the concrete using surface vibrator, power floater and trowel light brooming on as directed. including making expansion joint of size 20 x 110 mm & filling the expansion joint using coplar 200 as per manufactures specification by cutting of joint using concrete cutter machine etc. complete, providing 100mm thick m200 controlled coloured cement concrete road using tremix vaccum dewatering system with providing and fixing & removing of "c" channel having size 75 x 75 mm as per required level slope and thickness of concrete and levelling and finishing the concrete using surface vibrator, power floater and trowel light brooming on as directed. with colour pigmentation as 5 percentage to 10 percentage of cement consumption per m3 as directed by engineer incharge or consultant including making expansion joint of size 20 x 110 mm & filling the expansion joint using coplar 200 as per manufactures specification by cutting of joint using concrete cutter machine etc. complete, providing laying ordinary cement concrete m-200 and curing complete including the cost of form work and excluding cost of reinforcement for reinforced concrete work in : rc coping/cap, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundations, footings, base of columns and mass concrete, providing and laying reinforcement for r.c.c. work and bending binding & placing in position completed upto floor two level thermo mechanical treated bars(crs) as per i.s. standard, white stone bela masonry block in course in super structure with stone of approved quality in lime mortar 1:6 (1-cement : 6-coarse sand) including packing the joints etc. complete. (up to 10 ton), pointing on coursed stone masonry with cement m

State Government

CTN :39375435 Due date: 04 Mar, 202504 Mar, 2025 15.07 Lacs
Tender For construction of dry rubble check dam village at karanjvihire f c no 346 and village at kude khurd f c no 328 in chakan range

Central Government/Public Sector

CTN :39308352 Due date: 05 Mar, 202505 Mar, 2025 NA
Tender For construction of rubble retaining wall near directors car parking at cdac, vellayambalam
 Loading, Please wait...

Connect us via What's Up