Latest desk bench Tenders | Government desk bench Tenders

CTN :39841423

21 Apr, 2025 36.50 Lacs

Panchkula - Haryana

Tender For disposal of list comprising of items from sr. no. 1 to 437 (single lot of 437 items) - the assistant director (tech.), govt. industrial dev centre for tool and dies and anodizing, jagadhari - hmt horizontal milling m/c, model fn2h with tool/ acc., roll grinding machine with tool/ accessories and two additional panels:- i) (bch make 4.8 kw dated 28-01-83) ii) (bch make 22 kw dated 28-06-83), i) r. s joist ii) wire rope type electrical hoist wire rope (fitted in hoist), i) hmt drill machine with accessories ii.) bench drill machine stand (m.s. angle ), i) gen set 48kw/60kva with acc. batteries, ii) heavy duty pedestal grinder gd-i with acc., bench grinder, jig boring machine with acc., universal measuring machine no.828 with acc., hmt universal cylindrical grinding m/c g-22 with acc., i) hmt heavy duty centre lathe m/c, model l- 45 with cutting tools/ acc. ii) electric hoist cap. 7.5 ton with platform 6.1x22 mtrs, fired furnace (53x36) with acc. [thermocouple, thermocouple, temperature indicator (digital)], i) pilot self raising portable genty crane stand cap. 5 m. ton without hoist ii) m.s garder/m.s plate & angle(fitted in genty crane stand) iii) electric hoist iv) wire rope with clamp (fitted in hoist) v) spur gear crane vi) trolley (overhead) vii) chain(fitted in crane), wire ropes( scrap), milling cutters (scrap), spanner set, loose spanner, surface block (marking block), nose plier, plier, universal protector combination set, file flat 10, steel almirah 50x30x17, type writer, vernier caliper 15cm, ms rack, rack, dp cutter 12dp no.7, toolkit consisting of 100mm dia cutter with arbor cutter 63mm, file flat 8, handle file wooden, pipe die with handle, pipe wrench, steel almirah78x40x21, steel rule12, oil cane, round die3/8 (broken), drill chuck with arbor, slitting saw cutter, tool holder 1/2", dog carrier 1, dog carrier, drill sleave, plier, bench vice, round die 5/8 (broken), circular table 400mm, spanner set, loose spanner, dial indicator, stand magnetic, digit micrometer 25-50mm code no. 193-102, file 10 with handle, m.s rack, carbide tipped centre, file, oil cane, file6, file, oil cane, tap set 3/8 (broken), drill chuck and drill chuck arbor, dog carrier 11/2, loose spanner, revolving centre, surface gauge (used) (marking block), outside inside caliper, m.s rack, flat file, flat file8, file 12, spanner set, try square, empty drums, steel almirah 78x40x21, screw driver 10, soldering iron, plier, pad lock, dial test indicator, dial test indicator, magnet stand- 7012 ii) pneumatic stand - 7015, pocket calculator, m.s rack, file8, digit micrometer 50-75mm, drill chuck, drill stand, steel tool cabinet765x435x1170mm, bench vice, digit micrometer 0-25mm code no.193-101, vernier 6-150mm, carbide tipped centre, bench vice 6, carbide tipped centre, hand reamer 20mm, table lamp, end mill 22mm, end mill 20mm, depth micrometer 0-50 mm, empty cylinder (15kg), thickness gauge code 184-103, dial indicator, outside micrometer with dial indicator (25-50mm), tap set (broken), drill 4mm (broken), metric measuring tape, dial caliper 150mm, pitte space master traveling trolley with drafting chair, aristo calculator, flat file 12, chain pulley block (trolly) cap. 5ton with r.s joist, steel rule12, lock, hacksaw frame 12, drill 7mm, digit micrometer 75-100mm code193-104, vernier caliper6, m.s rack, wolf precision tool post grinder with internal grinding attachment, revolving centre, outside inside compass, plier, steel rule24, shell end mill 40x16x32, tool cabinet 765x435x1170mm, drill chuck, vernier caliper6-150mm, drill 5/16, wall clock, wall clock, steel tool cabinet, library table 8x4x21/2, equal angle cutter 80x20x22mm 600, equal angle cutter 63x16x22mm, end mill 22mm, pad lock, g plate, i) optical comparator pj-250 with acc. ii) tool maker microscope, dial indicator, end mill 20mm, outside micrometer 100-125mm, convex cutter 63x8x22mm, orpat calculator, out side micrometer 0-25mm, flat file 10, screw driver, heater, i) vernier callipe

Corporations / Associations / Others

CTN :39827882

28 Mar, 2025 14.10 Lacs

Chennai - Tamil Nadu

Tender For providing water supply arrangements and gym equipments to the gym building at 17th street, ashok nagar in div-131, u-31, z-10 (under ward councillor fund 2024-25) - boring using power rig 125mm dia upto hard formati...t time etc. complete as directed during execution, conducting yield test using v notch and with suita...ay as directed during execution for the bore well., supplying and lowering pvc pipe 125mm dia slotted casing pipe of 6kg/sq.cm. isi std., supplying and lowering pvc pipe 125mm dia plain casing pipe of 6kg/sq.cm. isi std., supplying and jointing 25mm dia pvc pipe.including...r fixing with necessary scaffolding etc. complete, supplying and jointing 40mm dia p.v.c pipe.includi...erfixing with necessary scaffolding etc. complete., providing and laying first quality plain ceramic t...ar shall conform to gradation as per is 1542 1977), providing and laying first quality vertified tiles...ement. labour materials etc. (relevent isi std)., supplying and fixing 40mm dia g.m. foot valve, construction of inspection chamber of size 60x60x7...y including necessaryreinforecement etc. complete., supplying and fixing in position best indian type ...ng good all the disturbed portions etc. complete., providing and fixing 75mm dia nahini trap (floor trap) with brassgratings., providing and fixing 110mm dia pvc soil or vent pipe.with relevent isi std.., supplying and fixing p.v.c.pipe 160mm dia rain wat...gsetc. complete as directed during the execution., supplying and erecting sintex or approved equivale...taxes and freight charges within corpn.city limit., supplying and fixing 15mm dia c.p.pillar tap, supplying and fixing 55cm x 40cm colour glazed was...c.p. pillar tap and other fittings etc. complete., providing enamel indication board with proper male or femalefigure of size 35x30cm as directed.., supply of 48" ( 1200 mm ) sweep size 5 star rating ceiling fan with out regulator, supply and fixing of surface mount patty type 1 x ...eathed copper leads from terminals to the fitting., supply and fixing of 450 mm (18") sweep (light dut...ecessary wall opening and making good of the wall., modular wiring with 2x4 sqmm(56/0.3) pvc insulated...hedule of rates from l432 to l730 and l730 & l731), supply and fixing of tneb meter board suitable for... insulated copper wire from eb meter to fuse unit., supply and fixing of 32 a tpnmc switch on suitable...th ms cable entry box with earth connection only, earthing as per the isi specification with an eart...d with 38mm rcc cover slab for the brick masonry, i.si.marked 2x16sq.mm cable, labour for laying of cable through hdpe pipe ( 50 ...pipe (trench size 100mm breadth x 150mm depth ), supplying and fixing of 1.5 hp jet pump set inclu...ries. ( kiloskar, texmo, cri or equivalent brand), supplying and fixing of treadmill: ct 825 weigh...ds like afton, plamax, spirit or equivalent brand), supplying and fixing multi press: pl 9021 of glass...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of lat pull down / seated ro...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of leg extension / leg curf :...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of ab / low back: pl9024 of...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of multi purpose bench: iffi...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of biceps/triceps: pl9023 ...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of flat bench: iffb of t...ds like afton, plamax, spirit or equivalent brand), supplying and fixing of dumbbell rack : ifdb4 of...s like afton, plamax, spirit or equivalent brand), supplying and fixing of dumbbells (pair) (brands like afton, plamax, spirit or equivalent brand), supplying and fixing of plates (brands like afton, plamax, spirit or equivalent brand), supplying and fixing of olympic rod 7 feet : - 250...ds like afton, plamax, spirit or equivalent brand), supplyi

Central Government/Public Sector

CTN :39836952

17 Apr, 2025 NA

Multi City - Multi State

Tender For supply of m.s trussels/stool and m.s. working bench 6 feet length,

CTN :39812987

02 Apr, 2025 30.00 Lacs

Pali - Rajasthan

Tender For furniture items and installation-two seater table with bench:two seater desk cum bench.overall size: h-760 w-950 x l-1050 (mm) age group: 15 & abovematerial description:-desk, seat & back of 18mm thick. pre-laminated board (plb) with 2mm pvc beading all over edge.frame vertical pillar of 1.2 mm (18swg) thick. crc sheet is 513book shelf & modesty panel of 0.8mm (22swg) thick. crc sheet is 513.frame base tube of 50x25x1.21mm (18swg) thick. erw rectangular tube (crc)all support tube of 25x25x1.21mm (18swg) thick. erw square tube (crc).seat & back frame tube of 25x1.21mm (18swg) thick. erw round tube (crc)good quality pvc shoes & bufferatbottom.all steel parts of powder coated with standard quality powder after 10 tanks anti-rust treatmentlectureroompodium:wooden podiumasper drg.no. jnt-007-274-00-270919 (without microphone& speaker) overall size: w-600 x d-600 x h-1200 (mm)classroom white boardsize:6x4feetiron bed:single bed for hostels & barrack.overall size:l2030xw827xh695ml80"xw32.5"xh27.4"inchmaterial specifications:the raw material used will be prime quality crca asper is 513 (1994,1998) 'd'grade.frame structure made up of prime quality crc(m.s.) rectangular tube 25x50x1.2mm (18 swg.)body made up of prime quality 0.8mm (22swg.)vendors should have calibrated testing equipment through nabl lab and copy of the sameshouldbeenclosedalongwiththetender.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and b grade phosphating (in house) & same will be demonstrated to the purchaser during pre- dispatch inspection.iron stoolfixed square stool with ms square frame with ss top (304grade)overall size (approx.): h-515xw-420xd-420(mm)material description:ms top 1.2mm thick. (18swg) crca sheet is 513grade.stool frame structure of 25x25x1.2mm (18swg.) erw squarepipe crc sheetis513.good quality pvc shoes at bottom.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and bgradephosphating (in house) & same will be demonstrated to the purchaser during pre-dispatch inspection.notice boardsize:4x3ftvisitor bench3 seats perforated (chromium plated) cluster chair on beam with handle.overall size(approx): l-73xd-28xh-30.5(inch)material description:integrated seat & back with arm & backrest.all frame work made up of chrome plated.seat & back will be perforated type.base will be htypeframe.bench will be properly welded and well finished.frame work will be made up of good quality material.computer tablecomputer table with pullout tray for keyboard, 3drawer unit, knee perforated panel & full shelf. overall size: w-120xd-60xh-75(cm) [48"x24"]material description:maintop & bottom shelf of 18mm thick. wood based high quality pre-laminated particle board (plb) of tesa with 2mm pvc edge band by hot melt glue process forbeading all over edge.table top c frame& key board trey of 0.9mm (20 swg) thick. crca sheet is513.leg tube, leg tube support & footrest of 25x25x1.2mm thick. (18swg) erw square ms tube.3 drawer unit of 22swg (0.8mm) & 23swg (0.7mm) thick.crca sheet is513.good quality camlocking & pvc handle.perforated modesty panel of 0.7mm (23swg) thick. crca sheet is 513.good quality telescopic channel (ebco) for key board trey.good quality pvc shoes at bottom.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment andb gradephosphating (inhouse) & same will be demonstrated to the purchaser during pre-dispatch inspection.class room tableoffice table with single drawer& half modesty panel, erw square pipe frame.table with top size of: w-120xd-59(cm) [48"x24"]material specification:table top: should be used best quality top of 19 mm thick plb of tesa with isi marking from branded manufacturer. 4 sides of the top will be banded with hi

CTN :39605716

29 Mar, 2025 NA

Imphal - Manipur

Tender For corrigendum : supply of spring balance , magnetic compass , set of three resistors 5 ohm 10 ohm and 15 ohm , measuring cylinder , bar magnet , ring magnet , disk magnet , u shaped magnet , aluminium pipe , slinky , one way key , laboratory , stand , assembly , ms rod , boss head , base , clamp , connecting wire crocodile clips , connecting wire banana clips , metal cylindrical with hook , pendulum ball with hook , split rubber cork , thread , concave mirror , convex mirror , lens double convex , lens double concave , prism , glass slab , plano concave , double convex lens , half cylindrical lens , cell holder , copper strip , enameled cupper wire , nichrome wire , nichrome wires , dia 55mm 24swg , dia 43mm 27swg , dia 38mm 28swg , constantan wire , multicore flexible insulated electric copper wire , 250g weight with hook , ray steak box , protector half , plane mirror strips , beaker 50ml , stirrer , multimeter with battery , laboratory thermometer , perspex lens holder , screen holder , candle holder , wooden scale optical bench , screen , candle , thumb pins , sand paper , pulley with frame rod , plastic box big , plastic box small , stopclock mechanical , kit box , compass , plastic strip a type , plastic strip b type , full protractor 360o , half protractor 180o , geo-board rectangular , plastic box , connectors for strips , connectors t type , set square , rotating needle , scale , micro test tube , test tube holder , test tube stand , dropper with rubber bulb , glass rod and stirring rod , spatula , beaker 10 ml , funnel , dry cell holder , torch bulb with holder , beaker 50 ml , measuring cylinder 10 ml , w- tube , tripod , kerosene burner , laboratory stand , litmus paper , watch glass , china dish , ms rod , clamp , base plate , g-clamp , thermometer laboratory , ph paper , metals zn cu fe , emery paper and sand paper , iron nails , fe filings and zn dust , filter paper , micro test tube brush , dispensing bottle , vials , double mouthed flask , stop cock , pvc tube , micro filtration unit , copper electrodes , connecting wire , magnesium ribbon , cotton wool , wash bottle , pasteur pipette dropper , kit box along with carton , compound microscope , glass micro slides , washing brush , razor blade , micro test tubes , test tube holder , magnifying lens , watch glass , needles , forceps , blotting paper , test tube rack , surgical scissor , glass rod , cotton , muslin cloth , painting brush , measuring pan with holder , laboratory stand assembly , steel rod , boss head , assembly boiling tube with cork fitted glass tube , test tube 20ml , petridis , cover glasses , u clips , knife cutter , split cork , black paper , magnifying glass a type , a box of tooth pick , conical flask , permanent slides , parenchyma , collenchyma , sclerenchyma , epithelial tissue , striated muscles , smooth muscles , nerve cells , hydra budding , spirogya , binary fission in amoeba , hydra , j malarial parasite , showing life cycle , k some diseased plants , l binary fission in paramoecium , specimens , starfish , tape worm , mosquito lifecycle , silk moth , honeybee , cockroach , earthworm , ascaris , plastic boxes

CTN :39800987

03 Apr, 2025 38.12 Lacs

Thrissur - Kerala

Tender For construction of new educational block for central sanskrit university guruvayur campus, puranattukara, thrissur. sh: providing student bench/desk with ms tubular frame work and marine plywood

Central Government/Public Sector

CTN :39498024

28 Mar, 2025 NA

East Khasi Hills - Meghalaya

Tender For corrigendum : supply of 3 seater integrated dual desk bench and 2 seater bright school desk - 3 seater lecture hall integrated dual desk bench , 3 seater lecture hall integrated dual desk bench same as sl no 1 , 3 seater lecture hall integrated dual desk bench same as sl no 1 and 2 , 2 seater bright school desk , 2 seater bright school desk same as sl no 4

State Government

CTN :39777625

04 Apr, 2025 6.52 Lacs

Calcutta - West Bengal

Tender For repairing, painting and polishing of wall paneling, ezlash, court officers tables, pleaders table, desk, bench and chairs etc. for the honble court room no. 19 at second floor, main building, high court, calcutta during the year 2024-25_2nd call

Central Government/Public Sector

CTN :39762181

10 Apr, 2025 NA

Raigad - Maharashtra

Tender For supply of office furniture - main table and return unit set for ed cabin , cabin back unit for ed cabin , high back chair for ed cabin , visitor chair for ed cabin , two seater sofa for ed cabin , one seater sofa for ed cabin , glass tea poy for ed cabin , corner piece for ed cabin , single bed for hostel or cisf staff , single bed mattress for hostel or cisf staff , single bed solid wood for guest house , double bed solid wood for gust house , bonded foam mattress for single bed , bonded foam mattress for double bed , pocket spring mattress for single bed premium , pocket spring mattress for double bed premium , wardrobe 1500w x 600d x 1850h nix , bedside table for guest house , tv unit elliot , 6 seater dining table for guest house canteen , 4 seater dining table for guest house canteen , dining chair for guest house canteen , serving counter for guest house canteen , wastebin 120ltr , twin wastebin 10ltr , solid teak wood bench for plant welfare rooms , premium public place seating , 3 seater public place seating ss304 , 3 seater public place seating ss202 , transform plus workstation 1200wx600d with pedestal , transform plus workstation 1500w1 x 1500w2 x 600d , conference table per seat , 12 door plu locker , storage unit 1050wx450dx750h , storage unit 1500wx450dx750h , storage unit 1500wx450dx1200h , cafeteria table 1200w x 700d x 750h , cafeteria chair , training room chair , auditorium chair push back type , plastic chair with cushion , dual desk bench 1 , dual desk bench 2 , ss dining table with folding stool 8 seater , all wood chair , 3 drawer pedestal , shoe cabinet , foot rest , white board , side table , public place seating for hospital , outdoor seating for guest house 3 seater , outdoor seating for guest house 2 seater , outdoor seating for guest house 1 seater , centre table for outdoor seating , garden bench , plastic chairs without arms , plastic chairs with arms

CTN :39752908

10 Apr, 2025 19.58 Lacs

Shahdol - Madhya Pradesh

Tender For supply of physics lab equipment - procurement of physics lab equipment, millikans oil drop 1. gap between parallel plates : 5 mm 2. voltage supply between the plates: 140 800v dc continuously variable o regulation : 0.1% o stability : 1 digit 3. voltmeter : 3 digit led 4. illumination between the plates : led 5. microscope : magnification 30x 6. time meter : 0 999.9 sec 7. monitor: 420 tvl, lcd monitor 8. input power supply : 220v ac/50 hz 9. density of the oil used: 929 kg/m, fresnel bi-prism1. optical bench, 1000mm- 1 2. riders, lateral adjustment -2 3. riders, plain- 2 4. sodium lamp, 20w, 110v 1 5. adjustable slit -1 6. biprism carrier, adjustable 1 7. lens carrier, plain 1 8. eyepiece carrier, adjustable 1 9. micrometer eyepiece 1 10. ground glass screen- 1 11. eyepiece adapter ring -1 12. height fixing collar -3 13. biprism 1 14. lens, f = +150mm 1, cascade control trainer1.power supply: 220v ac / 50 hz or as per regional requirements 2.temperature range: ambient to 100 c or higher.3.flow rate range: 0 10 l/min (or adjustable based on application). 4.pressure range: 0 2 bar (or customizable).signal types: input: 4 20 ma, 0 5 v, 0 10 v (selectable). output: 4 20 ma, 0 5 v, 0 10 v (compatible with actuators).accuracy: 0.1% of full scale. response time: 100 ms. pid parameters: adjustable proportional, integral, and derivative gains., celeastron nexstar evolutionoptical deisgn: aplanatic schmidt-cassegrain aperture: 235 mm focal length: 2350 mm focal ratio: 10 focal length of eyepiece: 26 mm included barlow lens: omni 2x magnification of eyepiece: 90xmagnification of eyepiece with barlow: 180x finderscope: starpointer pro star diagonal: 2 mount type: single fork arm altazimuth tripod: stainless steel power requirements: internal battery included highest useful magnification: 555x lowest useful magnification: 34x limiting stellar magnitude: 14.4resolution (rayleigh): 0.59 arc seconds resolution (dawes): 0.49 arc secons light gathering power (compared to human eye): 1127xoptical coatings: starbright xlt secondary mirror obstruction: 3.35 in (85 mm) secondary mirror obstruction by diameter: 36%secondary mirror obstruction by area: 13%optical tube length: 22 intotal telescope kit weight: 21.14 kgmax slew speed: 4 degrees per secondtracking rates: sidereal, solar and lunaralignment procedures: skyalign, 3-star align, solar system aligncommunication ports: 1 hand control and 3 aux ports for optional accessoriesapp database: over 120,000 including 220 of the best deep sky and solar system objectsusb charge port: yes, spin coating unitprograms10 programs with up to50 steps each15 programs with up to50 steps eachspeed stability 2% 0.25%speed 120 rpm to 6,000 rpm 500 rpm to 10,000 rpmspin time 1 s- 1,000 s 1 s to 3,600 spower supply 24 vdc / 2ainterlock software/hardware interlockcase dimensionswidth: 170 mmheight: 140 mmdepth: 225 mmmaterialscentral pp unit andchuck, steel case, petdisplay and keypad, andtempered glass lidcentral ptfe unit andchuck, steel case, petdisplay and keypad, andtempered glass lidfuses 1 a slow blowweight 3 kg 3.7 kg, 3d printerpanel size 15 build size 33 x 18.5 x 40cm (lwh)build plate perforatedpanel resolution 8k resolutionaverage printing speed 70mm/hrxy resolution 43micronz-resolution from 10 micronoperation 5 touch panelconnectivity usb/ethernetslicer software chitubox v1.8.1printer size l40 x w47 x h68cmprinting volume l33 x w18.5 x h40cmprinter weight 35kghousing full metal, ellipso meter (holmarc)measurement range, 1 nm ~ 300 nm ; incident angle, 30 ~ 90 , error 0.1 ; dpss laser, 532 nm, 5 mw ; si photodiode, 5.8 x 5.8 mm active area ; polarizer, 0 ~ 360 ., michelson interferrometerbase dimension: 290x212x168mm (lxwxh)distance (m2 & bs): 100mmbeam splitter: 50 x 38 x7mm (lxwxt)compensating plate: 50 x 38 x 7mm (lxwxt)mirrors m1 and m2: 30 mm dia, thickness 10mmr:t: 50 : 50flatness of beam splitter: /8least count: 0.01mm (coarse adjustment knob)least count: 0.0001mm (fine adjustment knob), magnetic

Desk Bench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations / Associations / Others

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector