Tender For providing of calibration services - calibration of instrumentation and control test instruments; voltage, current, power (ac/dc), frequency, power factor, phase angle, resistance, temperature, density, pressure, specific heat & humidity, gas analysis, force, pres..
Tender For supply of w96716155910 drg: 31611770098 rev: 00 condenser air evacuation package (vacuum pump) 30scfm , w96716155317 drg: - rev: 00 complete vacuum pump (bare shaft vacuum pump) spec: he57016 rev: 04 , w96716155325 main motor for vacuum pump spec: he57016 rev: 04 , w97716155067 bearing for motor of vacuum pump (30 scfm) (1set= 2nos) spec: he57016 rev: 04 size: to s , w97716155822 pressure transmitter for vacuum pump system: 0-1 bar abs spec: he57016 rev: 04 , w96716155813 level transmitter for vacuum pump spec: he57016 rev: 04 , w96716155244 drg: 31611770051 rev: 00 temperature transmitter for vacuum pump spec: he57016 rev: 04 , w96716155210 drg: 31611770047 rev: 00 differential pressure switch for vacuum pump. spec: he57016 rev , w96716155490 flow indicator cum switch for vacuum pump spec: he57016 rev: 04 , w97716155466 temperature gauge 0-100 deg c, for vacuum pump heat exchanger size: 0 to 100 deg c , w97716155733 drg: to suit original supply rev: 00 pressure gauge (0 to -1 bar) , w97716155741 drg: to suit original supply rev: 00 pressure gauge (service water) , w97716155547 level gauge for vacuum pump separator tank spec: he57016 rev: 04 size: to suit original , w96716155457 differential pressure gauge for vacuum pump package duplex filter spec: he57016 rev: 04 , w97716155849 drg: to suit original supply rev: 00 air flow meter (rotameter) for vacuum pump system s , w97716155679 complete solenoid valve assembly for air control system (process inlet) spec: he57016 r , w97716155660 complete solenoid valve assembly for seal water make-up spec: he57016 rev: 04 , supervision of commissioning lump sum per man day charges at site, including every expense at our si , supervision of commissioning lump sum per visit charges (to &fro) including travelling time & all ex
Tender For purchase of equipment - purchase of equipment: flat electrochemical corrosion cell (500ml), equipment: flat electrochemical corrosion cell (500ml)description: the flat electrochemical corrosion cell is a specialized device designed for the study and measurement of corrosion phenomena on flat specimens in a controlled liquid environment.specifications:a flat corrosion cell constructed of a glass cylinder body double jacketed with teflon material end caps for which should be simple and easy to use for corrosion and or coatings research.- volume of the cell: 500 ml- double side sample holder- should be able to measure the corrosion characteristics of flat specimens with a thickness of 6mm or higher.- exposed area of the sample or working electrode can be of 1 or 10cm2.- it should withstand the ph range of 2 9- temperature tolerance limit of the cell: 80 c - should have three ports for reference electrode, counter electrode and a purge tube, to control the gaseous environment of the cell.- should be provided with bridge tube for the reference electrode and purge tubes suitable for the port.spares: spares of o-rings and abrasive/corrosive parts should be supplied.additional accessories to be supplied:(i)reference electrode: (a)ag/agcl - 1 no.s (b)calomel - 1 no.s(ii)counter electrodes: graphite - 2 no.sbreakage warranty:2 years of warranty on the glass kits.
Tender For 11kv 90 w led fixtures of reputed make with minimum 120 lm/w lumens output, 105 v to 295 v voltage range, more than 0.94 power factor, pressure die cast alluminium housing, powder coated/ anodized finishing, toughed glass lamp cover, ip65 ingress protection, less than 25% thd, minimum 70% electronic efficiency, minimum 140 degrees along the road <(>&<)> 80 degrees across the road beam angle, 4500 to 6500k color temperature, very low mercury 6.4mg max, life more than 50,000 burning hours, maximum 20% depreciation during life, fully cut off control of distribution, electronic ballast driver type, minimum 10kv surge withstand capacity, poly carbonate reflector/ poly carbonate lens secondary optics, suitable for fixing to existing poles in the substations, with five years warranty to wanaparthy circle (sla10113)
Tender For corrigendum : instruments - adapter for ultrasound digital fetal doppler, 1 no., 4, adult colonoscope, 1 no., 8, aluminum walker adjustable, 1 no., 12, artery forcep 6" curved, 1 no., 16, autoclave vertical: model : ac123 , lab tech -should be fully automatic vertical autoclave for total destruction of all living microorganisms-pressure adjustable from 10psi to 20psi with an accuracy of +/- 1 to 3 psi, with automatic pressure control switch-outer and inner chamber made up of stainless steel-size of the inner chamber:- 50 x 75 cm (diameter x depth)-should be providing 2 carriers of stainless steel. size of the carriers should be 35-40 x 30-35 cm ( x d)-should be provided with silicon/ rubber/ neoprene gasket-lid should be stainless steel and should be fitted with pressure gauge safety valve manual exhaust valve vacuum breaker ports of calibration check-all the hinges should be of stainless steel-should be provided with stainless steel heated cover stand-drain valve at bottom for draining the water-electrically heated-micro processor controller based system to provide digital display of cycle processes like temperature, pressure-should be provided with low water level alarm and cut off-automatic pressure control switch- to cut off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level-should be fixed with chart and data recorder-iso/ ce marked -should provide test certificates, calibration certificate and traceability certificates for temperature and pressure gauges-the downtime of the equipment must not be more than 10 days annually and system must be made functional within 48 hours of breakdown and in case of such incident the period of breakdown will not be counted while calculating warranty or cmc period. if the downtime during any year is more than 10 days a penalty at the rate of 0.1percent of the cost of the equipment will be levied for each extra day of downtime.-operation manual with user demonstration video cd (with sop in guajarati), 1 no., 20, b.p. instrument digital, 1 no., 24, binocular microscope, 1 no., 28, bolster size large, 1 no., 32, bp instrument (mercury), 1 no., 36, c p chair (wooden + metal), 1 no., 40, centrifuge machine, 24 tube digital display & 5000 rpm, 1 no., 44, chital forcep 10", 1 no., 48, cold light source cable, 1 no.