Latest digital multimeter scrap Tenders | Government digital multimeter scrap Tenders

corporations/Associations/Others

CTN :39088567

04 Feb, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For work of repairing and maintenance of old and damaged 11/09 meter st pole with digging surrounding pole and fixing 3 angle with welding and grouting work in the area of edd-iind, mughalsarai area.

Central Government/Public Sector

CTN :38587466

04 Feb, 2025 19.66 Lacs

Mumbai - Maharashtra

Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - 285 instrument erection contract for revamping of flow lab at instrument workshop at rcf trombay unit; as per sow; as per sow- 1 fabrication, erection & installation of cable tray 50 mm width with necessary support m s angle 50 mm. this job includes two coat of primer and two coat of anticorrasiveepoxy coats. supply of primer and paint to be included and fabrication, erection and installation of cable tray. 50 mtr, 2 supply and installation side mounted glass tube level indicator approx 2.5 mtr length with high and low level switch adjustable over the full length. 1 no, 3 supply and installation and commissioning of centrifugal pump flow capacity of 30 m3/hr head 45 meter suitable for vfd drive 1 no, 4 magnetic flow meter 0 to 50 m3 /hr, 4" size flanged 150# rf, accuracy 0.1% with calibration certificate 1 no, 5 4" size ss material, 150#, flanged on/off valves with actuator, limit switch indication dome, solenoid valve 4 no, 6 vfd with panel and start /stop pb, and speed control 1 no, 7 pressure gauges 1 no, 8 supply, installation of piping suitable for the flow skid in sizes 4" and as per requirement 1 lot, 9 flow totalizer with contacts and set rest function 1 no, 10 panel for skid operation with pb, lamps, selector switch 1 no, 11 supply, installation of pvc coated cu tubing with necessary fittings for 4 valves 80 mtr, 12 supply, installation of air distribution header 6 points stainless steel 1 no, 13 supply, installation of 50 mm wide x 30 mm x 2 mm thick gi cable tray 100 mtr., 14 supply, installation of 100 mm wide x 30 mm x 2 mm thick gi cable tray 100 mtr., 15 supply, installation of layingof signal and power cables 300 mtr., 16 1 pair x 1.5 mm2 signal cable 300 mtr., 17 power cable for motor existing cable to be reused as per requirement 500 mtr, 18 spool pieces with one end flanged connection and other end with triclover coupling in ss304 of various sizes as below with 10d and 5d lengths. set of spool pieces shall iclude following sizes: 6", 4", 3", 2.5", 2", 1.5", 1", 3/4", 1/2" each in quantity 2 numbers 1 lot removal jobs 1 structural steel which includes ms ladder tray, stantion, alluminium cable trays 300 kg, 2 cable- signal , power cable removal 100 mtr., 3 level indicator 2 no, 4 existing piping and fittings 1 lot, 5 removal of existing pipe and fittings 1 lot

Central Government And Public Sector

CTN :39101291

17 Feb, 2025 2.41 Lacs

Bandipora - Jammu And Kashmir

Tender For tender for supply of electrical minor tools - adjustable spanner length 8 , adjustable spanner-10 long , adjustable spanner 12 , bent nose plier length 210mm , combination plier 8 , wire stripper , screw driver 8 inch , screw driver set , line tester length 4 , socket set (22 sockets + 5 accessories) , pipe wrench (heavy) 300 mm , ball pin hammer 500 gms , soft mallet hammer , 50 mm (340 mml) , ring spanner set-1812 6x7 to30x32 , flat chisels 200 mm , allen key 9 pcs set (mm sizes) brown finish 1.5mm , 2mm , 2.5mm , 3mm , 4mm , 5mm , 6mm , 8mm , 10mm , hand held search light , rechargeable , charger input 230vac , beam distance-350 m , flat file 8 smooth , ball pin hammer 300 gm , portable drill machine 2 to 20 mm bosch/kpt/hilti , angle grinder ag-4 , double ended spanner sets 6 to 32 mm , crimping tool manualy operated suitable for crimping upto 10 sq. mm to 400sq. mm , heat gun 1600w , digital multimeter (true rms hand held.) , digital clamp meter , cordless & brushless screw driver machine , angle grinder , ag-7/180 mm , digital insulation tester 1000 v

CTN :39103582

13 Feb, 2025 21.30 Lacs

Jammu - Jammu And Kashmir

Tender For purchase of lab equipments for division of processing and food engineering, faculty of agril. engineering, chatha - processing & food engineering lab equipments:-, infrared moisture meter specifications:- range: 0-100% readiability: 0.01% weighing capacity: 5-15g, microwave oven specifications:- power source: 240v,50hz microwave power level: 6-10 timer and alarm capacity: 30-50l touch control panel, rubber roll sheller specifications:- material of construction: iron & steel rubber roll: 255x256mm capacity: 80 kg/h rmp: 1200 hulling rate: 80-99 % motor: 5 hp, hammer mill specifications:- capacity: 20-50 kg/h rpm: 3000 -6000 power: 2 - 4 hp fineness of mess: 20-150, multipurpose millet mill specifications:- capacity: 20-50 kg/h power: 2-5 hp suitable for all types of millet, cleaner cum grader for grains specifications:- cleaning capacity: 500-1000kg/h power: 2-5 hp screen: 3-4 screen bloweraspirator fan cyclone control panel, planimeter specifications:- measurement: 6-digit pulse count ( 10 m2) measuring range: maximum vertical width: 325 mm horizontal roller rotating length: 30 mm scale: 1:1, apparatus for angle of repose specifications: material of construction: cast iron hopper size: upper dia: 30-60 cm height: 40-60 cm plate form dia: 40-60 cm, apparatus for friction specifications: material of construction: cast iron provision with changing the surface range of measurement: 0-90 , colorimeter specifications: display range: l*: 1 to 100, light source: pulsed xenon lamps, texture profile analyzer specifications: capacity: 50 n accuracy: 0.2%f.s 1digit (force) 0.1mm 1digit (distance) speed: 0.1-10 mm/s temperature: 0 to 40 c humidity: 20 to 80 %rh, water activity meter specifications: measuring range: 0-1 aw resolution: 0.01 aw accuracy: + 0.02 aw measurement temperature range for sample: 10-100 c operating (ambient) temperature range: 10-50 c max operating humidity (rh): 95%, biomass gasifier:- (three types) i. up draftii. down draft iii. cross draft specifications: weight: 50kg-100 voltage: 220v gas output: 10-20 m3/h material amount:: 5-10 kg/h, portable biogas plant specifications: waste input: 100 kg usage/application : kitchen material : frp/pvc

CTN :38859948

30 Jan, 2025 20.00 Lacs

Narmadapuram - Madhya Pradesh

Tender For corrigendum : tender for the purchase of orthopedic implants for the patients admitted in district hospital narmadapuram - interlocking nail for tibia all sizes with 4 locking bolt set, distal tibia nail all sizes with 4 locking bolt set, interlocking nail for femur all sizes with 4 locking bolt set, distal femer condylar nail all sizes with 5 locking bolt set, proximal femur nail a2 (stainless steel) short pfn a2/ with bolt, proximal femur nail a2 (stainless steel) long pfn a2/ with bolt, proximal femur nail plain with bolts (stainless steel) short pfn a2/ with bolt, proximal femur nail long with bolts (stainless steel) long pfn a2/ with bolt, interlocking humers nail all sizes with 4 locking bolt set, ph humers nail with all size bolt, trauma implants dynamic compression plate d.c.p.small radius/ulna complet set with screw (4 hole to 12 hole), d.c.p.narrow for tibia/humers all sizes with 4.5 cortical screw complete set (5 hole to 16 hole), d.c.p. broad for femur all sizes with 4.5 cortical screw & screw hole set, special plate " t" butteress plate for tibia all sizes with 4.5 cortica screw & 6.5mm cancellous screw hole set, "l" butteress plate right/left"t"butteress plate all sizes with 4.5 cortical screw & 6.5mm cancellous screw hole set, l.c.p. plate small all sizes with locking screw hole set, l.c.p. plate narrow with screw complete set, l.c.p. plate broad with screw complete set, "y"plate all sizes with locking bolt set, reconstrucition plate 3.5mm all sizes with 3.5 cortical screw hole set, reconstrucition plate 4.5mm with screw complete set, semi tubular plate all sizes with screw hole set, dhs system with d.h.s. plate. a.o.type (round hole) angle 125*, 130*, 135*, 140*, 145* all sizes lag screw (50-110mm)compression bolt long barrel plate (4-8 hole, 1250-1450) cortical screw 6 (4.5 mm sizes 16mm - 40mm) small (4-6 hole) / medium (7-12, d.h.s.plate a.o. type short barrel angle 130*, 135* with hip screw all sizes and required 4.5 mm cortical screw as one set & lag screw hole set, d.c.s.plate(angled blade plate)95* complete set all sizes with hip screw and required cortical screw as one set & lag screw, "k"nail for femur dia all sizes set, square nail radius (all sizes set), square nail ulna all sizes set, rush nail all sizes set, enders nail all diameter & sizes set, cancellous screw 4.0mm titanium 15mm to 50mm each, cannulated cancellous screw 6.5mm, 16 and 32mm stainless steel 25 mm to 110mm each, cannulated cancellous screw 6.0mm titanium 15mm to 65mm each, cannulated cancellous screw titanium 4.0mm 20mm to 70mm each, cannulated cancellous screw stainless steel 4.0mm 20mm to 70mm each, pin & wire thredad "k" wire double ended dia 1mm, to 3.5mm, all sizes & length each, "k" wire 1mm to 3.5mm each, s.s.wire reel 16 to 18, 20 gz each 5 meter, steinman pins 3mm, to 6mm each, denham pins 3mm, to 6mm each, a.o.type external fixator system 6 schanz screw schanz screw cancellous thread 5mm, 6mm close clamp- 5*10 open clamp- 5*10 close clamp-double pin- 5*10 rod-to-rod clamp- 10*10 connecting rods 10mm all length)all sizes, a.o.type external fixator system 10 schanz screw schanz screw cancellous thread 5mm, 6mm close clamp- 5*10 open clamp- 5*10 close clamp-double pin- 5*10 rod-to-rod clamp 10*10 connecting rods 10 mm all length)all sizes, a.o. type external fixator radius/ulna connecting rods 4mm close clamp-2.5*4mm all length complete set, external fixator ilizarov four ring complete set (all sizes 80mm to 240mm italian femural arches 90*, 120* all sizes multiple fixtion clams schanz pin fixtion bolts oblique supports threaded rods all sizes (75mm to 400mm,) telescopic rod all sizes (75mm to 350mm) post male/female all sizes hinges female/male 1 hole set ilizarov wires baynot type all sizes olive wire all sizes connecting bolt connecting nut 10mm wire fix. bolts cannulated/slotted complete set, external fixator ilizarov three ring complete set (all sizes 80mm to 240mm italian femural arches 9

CTN :39054050

13 Feb, 2025 62.00 Lacs

Lucknow - Uttar Pradesh

Tender For supply of arduino mega , arduino uno , respberry pi 4 , pi display , pi camera , bms , nodemcu , esp32 cam development board , power router , beaglebone ai for artificial intelligence based applications , peripheral sets for arduino or nodemcu or raspberry pi , oscilloscopes , function generator , benchtop multimeter , non contact voltage tester , micrometer , vernier calliper digital , electronic component repository , hot air gun , air compressor silent , led string light making machine , circular saw , bench drill machine , bench drill machine magnetic , hand drill machine , impact drill , pnumatic drill machine , jigsaw machines , bench grinder , chopsaw , table saw , laser cutting machine , printer vinyl cutter , angle grinder , printer laser , screwdriver set powered , wood lathe , mini desktop lathe cum milling , scroll saw machine , dremel cordless rotary tool , belt and disc sanding machine , coil winding machine motorized , nail machine , pcb power drilling machine , advanced motorized sewing machine , sheet cutter for power tools , variavle voltage power supply , power adopters , multiple adopter , smart ac plug , conference speaker , sheet cissor , sheet cutter for machining and fabrication tools , screwdriver set , tool wall covering perforator , end cutting mini plier , multi purpose bent nose plier , ratchet clamp , needle files , pipe vice , dremel multi tool kit , revet gun , electric rivet insert nut gun cordless riveting drill adaptor tool , adjustable spanner , micor chisel set , baby vice , anvil , wire stripper , linesmans pliers , cutting pliers , fencing pliers , ironworker pliers rebar pliers , locking pliers , ring spanner , socket spanner , hook spanner , radium cutter knives , spirit level , tap and die set , height gauge , magnifying glass with stand 2 no , digital microscope , digital telescope , measuring tape , measuring tape digital , techometer , glass cutter , allen key , tri square , electric clamp meter , multimeter , weighing scales , welding consumables , rust remover spray , acrylic sheets , foam sheets , aluminum channels , pcb drill bits , 3d printer filament , thinner , pu paint , pu primer , wires , pneumatic pipes , pneumatic fittings , drill bit set , revet , gypsum , c clamp , microware portable scan , 3d scanner cnc , exhaust portable , slide changer , carpentry boring bits , usb cables , lan cables , 9v batteries , tin cutter with spring , cutting mats , laser distance measurer , flashlights , gas welding , adjustablet wrench head , trolley , card machine , rechargeable lithium ion battery , hot air blower with soldering iron , shouldering rod , clothes iron , lithium battery spot welding machine , tool bins plastic with metal brackets , vacuum cleaner , robotic vacuum cleaner , filament dehydrator dry cabinet , reflow oven

CTN :39083661

15 Feb, 2025 NA

Darjeeling - West Bengal

Tender For supply of socket set 32 pcs , digital clamp meter , oil filter clamp , pipe wrench 24 inch , magnetic stick , socket 40 inch 42 inch , angle grinder 220v ac , electric test bench 12 24v , hub puller als front

CTN :39051487

30 Jan, 2025 NA

Pudukkottai - Tamil Nadu

Tender For purchase of consumables - purchase of consumables, wall mixer material: brass, size: 17x17x5 or above, angle cock (ss), water heater connection hose (ss) size: ( lxbxh):24 cmx2 cmx2 cm, 3/4"cpvc "l" coupling, 3/4" cpvc "t" coupling, 3/4" cpvc coupling with brass inner thread, stainless steel tap, wall shower, 3/4" cpvc pipe, 5" pvc pipe, 2" pvc pipe, 3/4" pvc pipe, wash basin waste water coupling, wash basin tap connection hose, wash basin waste water hose pipe, western toilet jet with hose, wash basin tap, pvc bathroom drying hole, 2 in health faucet 1.0 meterflexible hose pipe and wall hook, chrome handshower, 3/4 pvc ball valve, 3/4" brass foot valve, water testing kit (tds water , ph colour chart, ec meter)measure range: 0-10000, accuracy : 0.1, dp mcb 32a, single pole mcb 10a, single pole mcb 16a, wooden wiring main board size (2x3), 18 gauge copper earth wire, copper wire 2.5 sq. mm (red colour), copper wire 1 sq. mm (black colour), db box 8 way with neutral bar and earth bar, extension board box (6 socket, 6 switch , fuse and extension cords, spike buster with 10 mtr long pure copper wire with pvc coverig)

CTN :39084196

15 Feb, 2025 NA

Bangalore - Karnataka

Tender For supply of accessories of skill driving track having 14 obstacles with sensors and three modified als - embedded system controller unit arm based processor with quad core on board soc and 64 bit industrial micro controller for multiple signal sensors measurements , customized embedded software to measure the distance oblique signal from light comma speed and gear which will communicate to all devices and etc , obstacle name reader industrial ultra high frequency reader with ip66 enclosure with 12v dc input with mounting accessories , distance sensors that is water proof industrial proximity sensor comma distance 2 to 5 meter with metal enclosure with input voltage range from 5 to 30 dc , auto electrical wire and flexible hose with accessories , hardware modules for audio and speed , obstacle name transmitter that is rfid pole for 15 obstacles comma programmed pole with pvc pipe of 90 mm dia and 3 feet height , signal reflector iron board 4 x 4 with 2 x 4 plate frame to measure the left comma right and back distance , wi fi routers with 4 to 5 hours battery backup , dell smartchoice core i3 dash 1215u comma 12th gen 8gb ram oblique 512 gb ssd oblique fhd oblique window 11 oblique ms office comma 21oblique 15 inch 38 cm oblique 15 month mcafee oblique black , epson ecotank l3252 wifi all in one ink tank wireless colour led printer black , traffic oblique obstacle retro sign board with 6 to 8 feet l 2 feet l angle and civil work , installation charges including inspection comma design comma civil labour and engineering charges

Central Government And Public Sector

CTN :39055141

03 Feb, 2025 NA

Thane - Maharashtra

Tender For supply of phased array ultrasonic flaw detector 32 128 elements pr configuration , mini encoder quadrature or clock direction type , lithium iron battery pack rechargeable type minimum 90 watts hour , external battery charger lithium iron battery pack compatible , standard phased array probe frequency 5.0 mhz , standard phased array probe frequency 2.25mhz linear array , standard phased array probe frequency 2.25mhz dual linear array , phased array probe frequency 4mhz dual matrix array , phased array probe frequency 10 mhz linear array , standard wedge for angle beam phasedarray probe normal scan 55 deg refracted angle in steel , standard wedge for angle beam phasedarray probe normal scan 0 deg refracted angle in steel , wedge for dual phased array probe normal scan 55deg refracted angle , wedge for dual phased array probe normal scan capable of sectorial and surface waves , wedge for dual phased array probe normal scan 55 deg refracted angle in steel , standard calibration block made of carbon steel consisting of total 10 nos. side drilled holes of diameter 2.5mm each , standard calibration block made of stainless steel consisting of total 10 side drilled holes of diameter 2.5mm each phase array ultrasonic flaw detector 32:128 element pr configuration with provision of additinal 2 number of conventional ultrasonic channel, mini encoder quadrature or clock/ direction type, resolution greater than or equal to 12 steps/mm , easy to deploy and able to encode in raster scan across long distances consisting of minimum 5 meter cable , waterproof along with lemo connector for phased array ultrasonic flaw detector as per technical specification bid number/ & ( * ) : gem/2025/b/5841572 dated/ + : 23-01-2025 bid document/ 3 3 1 / 31

Digital Multimeter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector