Latest diplory Tenders | Government diplory Tenders

CTN :44882125

22 Apr, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, bobrmn1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079617706 boxnr [2] er 72029660404 bobrnm1 [3] ser 10079666960 boxnm1 [4] nr 30038961066 bcnm1 [5] cr 30019060320 bcnm1 [6] er 30029020147 bcnm1 [7] cr 30019160457 bcnm1 [8] ser 30079160251 bcnm1 [9] er 30029125682 bcnm1 [10] ser 10079646511 boxnm1 [11] ser 10079662764 boxnm1. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (132.180 mt) is the lot quantity (132.180 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchasermay, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowedinside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnm1 & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

Central Government And Public Sector

CTN :44882223

23 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - mild steel scrap cut up parts of cond. wagons to be sold without bogie and excluded fittings as per crse/ bsp letter no. mech. /hq/ 003/007 /4016 dt. 12.11.2018 [excluded fittings-coupler body, knuckle, knuckle pin, draft gear, yoke ,bogie end pull rod, brake cylinder complete with piston rod and suspension bracket, yoke pin,ctrb, wheel sets and roller bearing, bogies, icf trolley bvzi, distributor valve.] & front follower of draft gear vide pcme/bsp's letter mech/hq/010/010/warranty dtd. 09.06.2020. remark: 1. wagons may be grounded for clearing of track. 2.wagon component must be cutup before lifting by the purchaser, so that component can not be re-used. 3. weight is as per the challan provided by the stock holder and it is for reference only. 4.in bvzc wagon lb springs to be cut marked before delivery to ensure non-recycling of material. 5. to be sold on "as is where is basis" 6. cbc components to be handed over sepretarely in placemeal.

Central Government/Public Sector

CTN :44882321

23 Apr, 2026 NA

Multi City - Karnataka

Tender For auction sale of rolling stock - ubl-bgm-wagon-26-a [ pl no 98111048 ] condemned & unserviceable 08-wheeler broad gauge (bg) wagon 01 no. wagon no: nr boxnhl-22032016408 location bgm yard near railway electrification pole no 609/42 under the custody of sse/c&w/bgm. the purchaser shall physically inspect the lot prior to participating in the auction. cutting permitted by gas or manually in loadable sizes. purchasers shall not disturb or damage any other railway assets during dismantling or removal. all railway components (rc items) must be returned to the railway: (a) casnub bogie with fittings[wheel set with ctrb-04 nos,bogie-02 (2 items total - 06 nos) (b) complete cbc fittings [coupler body-2 nos, draft gear with front follower- 2nos,yoke -2 nos, yoke pin-2 nos,knuckle-2 nos, knuckle pin-2 nos, knuckle thrower-02 nos,lock-02 nos, lock lift assembly-02 nos, stricker casting-2 nos (10 items total - 20 nos) (c) air brake components-distributor valve-1 nos, control reservoir-01 nos, bp hose -02 nos, fp hose-02 nos, bp cock-02 nos, fp cock-02 nos, isolating cock-02 nos, a r tank-01 nos, dirt collector-02 nos, bmbs cylinder-2 (10 items total - 17 nos) (d)brake riggings -brake beam-04 nos, end pull rod-02 nos, hand brake wheel-02 no's (3 items total - 08 nos) (e)door(boxnhl flap door)-04 nos. road access has been made available up to the lot, images also uploaded. the purchaser has easy access to the lot via road for dismantling and cutting purposes. there is no need to cross the track to access the wagon. the sold lot will be handed over to the purchaser in the presence of the concerned custodian, nominated sr. asv/sr. isa/asv/isa, cdms/dms/sales and nominated rpf personnel. delivery will be affected on a number basis. note - a) all the bidders are advised to request the delivery request via ireps portal only. b) select delivery fixation date at least 7 days from the delivery request letter date. c) select 3 unique preferences for delivery date and submit to avoid rejection.

CTN :44611891

18 Apr, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of hardware for bogie installation : -hex head bolt m10x40 to is 1364 part 1 , hex head bolt m20x240l sae aisi , m16x145 to is 1364 part 1 2002 , m6x70 to is 1364 part 2 2002 to matl , hex head bolt m10x35l , hex head bolt m10x60l sae aisi , hex head bolt m12x100l sae aisi , hex head bolt m16x65l sae aisi , m20x100 to is 1364 part 2 2002 pc 10 9 , hex head bolt m20x75l sae aisi , hex head bolt m24x70l sae aisi , hex head bolt m20x130l sae aisi , hex head bolt m24x120l sae aisi , hex head bolt m24x180l sae aisi , hex flange bolt full thread m6x12l , hex flange bolt full thread m6x40l , m6x45 bolt hexagon head flange , nut hex normal m5 , hex head slotted castle nut m10 , hex head nut m8 , hex head nut m8 sae aisi , hex head nut m10 sae aisi , hex head nut m12 sae aisi , hex head nut m16 sae aisi , hex head nut m20 sae aisi , hex head nut m24 sae aisi , hex head nut m6 to is 7042 to matl , hex head flange nut m6 , nut self lcok m10 , m10x20 tois 1364 part 1 2002 , screw hex head m5x20l , hex head screw m10x16l sae aisi , hex head screw m10x70l sae aisi , hex head screw m12x30l sae aisi , hex head screw m16x30l sae aisi , hex head screw m16x50l sae aisi , hex head screw m20x45l sae aisi , hex head screw m20x55l sae aisi , hex head screw m24x75l sae aisi , hex head screw m12x45 to is 1364 part 2 , hex head bolt m16x55 to is 1364 part 2 , hex head bolt m16x60 to is 1364 part 2 , hex head screw m20x60 to is 1364 part 2 , hex head screw m24x80 to is 1364 part 2 , hex head screw m8x 16 , hex head screw m8x30l , punched washer a9 , a18 punched washer to is 2016 , b20 spring washer to is 3063 94 , spring lock washer b8 jis g 3506 , spring lock washer b10 sae aisi , spring lock washer b12 sae aisi , spring lock washer b16 sae aisi , spring lock washer b20 sae aisi , spring lock washer b24 sae aisi , spring lock washer b36 sae aisi , plain washer a9 sae aisi , plain washer a10 sae aisi , plain washer a14 sae aisi , plain washer a22 sae aisi , split pin dia2 5x20l jis g 3505 , hex hd bolt pin hole in hd , hex head bolt with hole , screw hex pin hole in head , schnorr washer m10 , schnorr washer m12 aisi 1070 , schnorr washer , schnorr washer m24 aisi 1070 , hex head bolt , schnorr washer m10 aisi 1070 blackened

CTN :44867527

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no.98050047. scrap c & w fittings consisting of bolster hanger, dome cylinder, anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, ox cut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any nonferrous. qty-154mt. location-east of vm road in ncb-13.

CTN :44867535

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, ox cut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any nonferrous. qty-159mt. location-east of vm road in ncb-8.

CTN :44867585

30 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned 03 nos wagon, sl no. [1] ser 25079360428, type-boxnr, [2] nfr 25059460032, type-boxnr, [3] cr 25019660373, type-boxnr. total qty- 03 nos. these wagons are made of ss. excluded items of each wagons are as follows: 1) wheel set with axle- 04 nos, (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie- 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos, 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos. (nb- apm-not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient in the aforesaid wagons). excluded items as mentioned are to be returned to the custodian by the purchaser during return over programme. the wagons will be disposed off except excluded items vide crse/frt/kkk's l/no. mc/300/pt.xx, dt. 10.04.2024. wagons are to be sold without bogies.

CTN :44867587

30 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - condemned 03 nos wagon, sl no. [1] ser 10079262131, type-boxnm1, [2] ser 12079460104, type-boxnhsm1, [3] scr 10099561634, type-boxnm1. total qty- 03 nos. excluded items of each wagons sl no- 1 & 2 are as follows: 1) wheel set with axle- 04 nos, (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) bogie- 02 nos, 4) brake cylinder- 01 no, 5) draft gear- 02 nos, 6) coupler body- 02 nos, 7) yoke-02 nos, 8) yoke pin- 02 nos, 9) yoke supporting plate- 02 nos, 10) yoke pin support plate- 02 nos, 11) all sorts of bolster springs, 12) distributor valve (ci)- 01 no, 13) slack adjuster- 01 no, 14) knuckle- 02 nos, 15) anchor plate with safety plate- 02 nos, 16) brake beam complete for casnub bogie- 04 nos, 17) equalising lever with bush- 04 nos, 18) bogie brake push rod- 02 nos. (nb- apm-not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient in the aforesaid wagons). excluded items of wagon sl no- 3 are as follows: 1) wheel set with axle- 04 nos, (one no wheel set with axle consists of two wheel disc & one axle), 2) ctrb- 08 nos, 3) brake cylinder- 01 no, 4) draft gear- 02 nos, 5) coupler body- 02 nos, 6) yoke-02 nos, 7) yoke pin- 02 nos, 8) yoke supporting plate- 02 nos, 9) yoke pin support plate- 02 nos, 10) all sorts of bolster springs, 11) distributor valve (ci)- 01 no, 12) slack adjuster- 01 no, 13) knuckle- 02 nos, 14) anchor plate with safety plate- 02 nos, 15) brake beam complete for casnub bogie- 04 nos, 16) equalising lever with bush- 04 nos, 17) bogie brake push rod- 02 nos. (nb- apm-not included as a excluded item as this item is not fitted in the aforesaid wagon and 02 nos hand break wheel deficient in the aforesaid wagons). nb: bogies (02 nos) not included in the excluded items of wagon sl no. 3 (scr-10099561634) as this wagon is fitted with casnub 22w(m)- bogies with wide horn which are no longer in use in any of the current design wagon vide edme/frt/rly bd's l/no-2018/m(n)/60/4, dated-14/11/2019 & this wagon should be sold & disposed with bogies. the wagons will be disposed off except excluded items vide crse/frt/kkk's l/no. mc/300/pt.xx, dt. 10.04.2024.

Central Government/Public Sector

CTN :44873308

11 May, 2026 NA

Bhusawal - Maharashtra

Tender For corrigendum : supply of poh kit for 203 mm bogie mounted air brake cylinder, consisting of 18 items: 1) special washer, rdso drg. no. sk 81206, alt.3, item no.12, qty/set-1. 2) split pin dia 5x40, rdso drg. no. sk 81200, alt.5, item no.18, qty/set-3. 3) split pin dia 3.2 x 18, rdso drg. no. sk 81200 alt.5, item no.38, qty/set-3. 4) jubilee clip size 5, rdso drg. no. sk 81200, alt.5, item no.21, qty/set-1. 5) jubilee clip size 2,rdso drg. no.sk 81200, alt.5, item no.51, qty/set-1. 6) ring, rdso drg. no. sk 81206, alt.3, item no.23, qty/set-1. 7) pawl spring, rdso drg. no. sk 81206, alt.3, item no.19, qty./set-2. 8) piston packing, rdso drg. no. sk 81204, alt.4, ltem no.10, qty./set-1. 9) dust excluder, rdso drg. no. sk 81204, alt.4,item no.5, qty./set-1. 10) circlip light b22, rdso drg. no. sk 81200, alt.5, item no.5, qty/set-1. 11) circlip light b16, rdso drg. no. sk 81200, alt.5, item no.53, qty/set-2. 12) circlip light a32, rdso drg, no. sk 81200, alt.5, item no.3 l, qty/set- 1. 13) pawl, rdso drg. no. sk 81206, alt.3, item no-8, qty/set-2. 14) shim for plunger, rdso drg. no. sk 81206, alt.3, item no.16, qty/set-2. 15) special washer. rdso drg. no. sk 81206, alt.3,item no.13, qty/set-2. 16) special washer, rdso drg. no. sk 81206, alt.3, item no.15, qty/set-2. 17) collar(in 2 halves), rdso drg. no. sk 81206, alt.3, item no.4, qty/set-1. 18) bush with filter, rdso drg. no. sk 81202, alt.3, item no 3 & 4, qty/set-1 [ warranty period: 30 months after the date of delivery ]

CTN :44873310

11 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : supply of pin for icf bogie to rdso drg. no. sk - 93186 alt. 3, item- 2. matl. & specn. is:1875/1992 cl. 2. [ warranty period: 30 months after the date of delivery ]

Diplory Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector