Latest dismantle Tenders | Government dismantle Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

Central Government/Public Sector

CTN :44899829

15 May, 2026 13.99 Lacs

Mumbai - Maharashtra

Tender For supply of main signal , shunt signal , panel servicing work , signaling cable , cable trench excavation , cable laying , main signal termination , shunt signal termination , hdpe pipe supply , pipe laying work , signal dismantling work , interlocking system overhaul

State Government

CTN :44883773

29 Apr, 2026 NA

Ukai - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt-5156g - ele fuel - work of emergency dismantling, lifting, shifting, lowering, hoisting & complete overhauling of various capacity ht & lt motors of coal handling pla..

Central Government/Public Sector

CTN :44889602

24 Apr, 2026 NA

Kolkata - West Bengal

Tender For work of dismantling and shifting of cold box structure at cryogenic plant building, 1/af, bidhan nagar, kolkata-700064

State Government

CTN :44835922

06 May, 2026 NA

Munger - Bihar

Tender For supply of heating element with required accessories if any , supply of temperature controller , supply of ceramic blanket with accessories , supply of ceramic rope , supply of ss fabricated flue duct with accessories , supply of stainless steel rod 310 grade for fabrication of hearth , supply of heating element brick , supply of refrctory castable for rectification of refrctory work , supply of refrctory insulation morter for refrctory work , dismantling cleaning, overhaling, including supply of damage part replacement/ repairing of door mechanism , dismantling cleaning, overhaling, including supply of damage part replacement/ repairing of blowers , furnace, trolley, panel, blowers painting work , supply of thermocouple and compensating cable , dismantling cleaning, overhaling & erection charge , reparing of chimeny including intenal & external and repair , supply of 7.5 hp, 415 volt make abв ltd., 2800 rpm/crompton m.s. body & runner s.s motor drive exhaust blower

State Government

CTN :44889694

18 Apr, 2026 24.77 Crore

Bengaluru - Karnataka

Tender For combined package for the work-a) providing additional 1 x 20 mva power transformer at 66/11kv malali sub-station, work-b) replacement of 2x6.3mva, 66/11kv power transformers by 2x20mva, 66/11kv power transformers at 66/11kv hangarahally sub-station, work-c) replacement of 2x8mva, 66/11kv power transformers by 2x20mva bychanahally sub-station, work-d) providing additional 1 x 20 mva power transformer at 66/11kv gangur sub-station on partial turnkey basis , including supply of all materials/equipments and erection (including dismantling & civil works) of all materials/equipments, testing and commissioning and dismantling of the materials.

Central Government/Public Sector

CTN :44895628

06 May, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of opening of transformer cover draining oil de-tanking core- coil assembly assessment and estimation for repair and replacement of parts providing locking arrangement of all valves and plugs , loading and unloading of transformer at side cph and firms work premises hiring , hv leg coil with insulation varnish and baking of coil assembling vacuum , lv leg coil with insulation varnish and baking of coil assembling vacuum impregnation new ec grade copper with insulation , set of gaskets rubberized cork neoprene material and size is needed for hv and lv , breather dehydrator silica gel type with fresh silica gel 01 kg , fresh transformer oil of standard quality as per the isi mark for main tank and oltc , double float buchholz relay including all accessories , air release valve including all accessories if required , magnetic oil gauge including all accessories if required , radiator valve including all accessories if required , reassembling of 3 15 mva transformer dyn 11 star delta connected with proper size of copper strip , replacement change of complete gaskets rubberized cork neoprene material , the oltc was completely repaired with the replacement , painting charges of transformer tank having hot oil resistant paint inside and synthetic enamel paint on transformer after cleaning of tank and complete painting outside etc as reqd. , less the cost of old and burned transformer oil plus old transformer oil of oltc , less the cost of old and dismantling insulated copper

State Government

CTN :44885784

27 Apr, 2026 NA

Haridwar - Uttarakhand

Tender For dismantling and repairing work of decking arrangement of shiv dhanush bridge including paint work of janki and shiv dhanush bridge at har ki pauri haridwar.

State Government

CTN :44903502

06 May, 2026 6.57 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - dismantling shifting of old defective 40 mva transformer and erection of 40 mva tf with all associated work at 132 kv substation jhinjhana under electiricty transmission..

State Government

CTN :44594304

08 May, 2026 7.14 Crore

Delhi - Delhi

Tender For design and etc of 04 nos. 25 mva, 33/11 kv transformer including dismantling of existing 02 nos. 20 mva and 02 nos. 16 mva, transformers with associated civil work at 220 kv sub-station, lodhi road on turnkey basis (risk and cost purchase basis)

Dismantle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors