Latest dismantlement Tenders | Government dismantlement Tenders

Central Government/Public Sector

CTN :38587627

23 Dec, 2024 3.25 Lacs

Chhindwara - Madhya Pradesh

Tender For providing of custom bid for services - proposal for installing a 33 kva electric sub station from surface to underground including dismantling at urface transportation installation at ug and construction of concrete foundation

Central Government/Public Sector

CTN :38554649

23 Dec, 2024 4.79 Lacs

Cuddapah - Andhra Pradesh

Tender For repair and renovation of mpp school mabbuchintalapalle under csr - earth work in excavation by mechanical means , filling by brought out excavated earth , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand , structural steel work riveted , providing and fixing precoated galvanised iron profile sheets , painting with synthetic enamel paint of approved brand , applying priming coats with primer of approved brand and manufacture , wall painting with acrylic emulsion paint , centering and shuttering including strutting , propping etc , dismantling stone slab , half brick masonry with non modular fly ash bricks , 15 mm cement plaster with mix , crazy ceramic tile flooring , providing and applying plaster of paris putty of 2 mm

State Government

CTN :38539058

20 Dec, 2024 1.19 Lacs

Ferrargunj - Andaman And Nicobar Islands

Tender For dismantlement of 01 no. rcc overhead tank at chc bambooflat under bambooflat sub division, rcd,apwd,wimberlygunj

State Government

CTN :38533048

26 Dec, 2024 41.06 Lacs

Ahmedabad - Gujarat

Tender For replacement work of rubber seal with nut and bolt by dismantling old rubber seal, repairing of wire rope from at the end of rope socket, replacement of 6 worm reducer, 5 h.p. electric motor, dog clutch, f & r gear box, tyre coupling, 10 h.p. diesel engine, hand operation mechanism and mechanical brake by dismantling old parts of c.d. unit, strengthening/repairing of anchor girder between gate no.5 and 6, providing and fitting new hand railing on existing concrete ladder and providing and fitting new entrance gate for footbridge approach by dismantling old gate and railing and box type steel ladder for spillway approach at left side of the spillway bridge and other miscellaneous work etc. in 30 x 20 size radial gate - 12 nos of fulzar (k. b) irri. project (dist: jamnagar)

corporations/Associations/Others

CTN :38249886

26 Dec, 2024 18.31 Lacs

Bangalore - Karnataka

Tender For corrigendum : tender for supply of powder coated aluminum partition work detail specification as per annexure a , powder coated aluminium door /window sliding or openable detail specification as per annexure a , dismantling tile and roof work detail specification as per annexure a , demolishing brick work manually detail specification as per annexure a , demolishing cement concrete manually detail specification as per annexure a , dismantling aluminium gypsum partitions doors windows detail specification as per annexure a , dismantling cement asbestos detail specification as per annexure a , earth work excavation detail specification as per annexure a , p l in pcc1 4 8 c cs and sg 20 mm detail specification as per annexure a , brick work with common burnt clay 1 isto 4 in foundation detail specification as per annexure a , 115 mm thick brick work with common 1 isto 4 detail specification as per annexure a , p l in rcc m 20 cement coarse sand stone grit 20 mm detail specification as per annexure a , centering and shuttering including strutting detail specification as per annexure a , steel reinforcement for r.c.c. work detail specification as per annexure a , glazed vitrified tiles matt antiskid finish of size of tile 600 x 600 mm detail specification as per annexure a , 18 mm thick granite mirror polished detail specification as per annexure a , structural mild steel work riveted bolted or welded in built up sections detail specification as per annexure a , providing and fixing stainless steel grade 304 pipe detail specification as per annexure a , white vitreous china flat back urinal basin of 430x260x350 mm detail specification as per annexure a , wash basin with ci brackets 15 mm cp brass pillar taps detail specification as per annexure a , stainless steel a isi 304 kitchen sink detail specification as per annexure a , c.p. brass angle valve detail specification as per annexure a , pvc waste pipe for sink or wash basin detail specification as per annexure a , 110 mm dia u.p.v.c pipe detail specification as per annexure a , cpvc pipes having thermal stability for hot and cold water 20 mm detail specification as per annexure a , c.p brass long neck type bib cock detail specification as per annexure a , p and f unplasticised pvc connection pipe with ptmt detail specification as per annexure a , 2 tr bee star rated 5 star air condition detail specification as per annexure a , s and f of gi box wih modular plate and cover 25 a modular socket outlet and 25 a modular sp mcb detail specification as per annexure a , wiring for circuit submain 2 x 4 sqmm plus 1 x 4 sqmm earth wire detail specification as per annexure a , 50mm thick sandwich puf panels with 0.5mm thick prepainted colour coated galvanised detail specification as per annexure a , g.i metal ceilling laying in plain tegular edge global white color tiles detail specification as per annexure a , 12 mm cement plaster of mix 1 isto 4 detail specification as per annexure a , painting with synthetic of required colour detail specification as per annexure a , finishing walls with acrylic smooth exterior paint detail specification as per annexure a

CTN :38198122

19 Dec, 2024 5.96 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : demolition of building - demolition of precast concrete block masonary built in cement mortar , demolition of reinforecement concrete in roof, floors , taking down door and windows of chokhats or frames exe 1.5 sqm but in exc 4 sqm each with shutters , removal building materials, etc to a distance of 5.0km or under, beyond the lead including in the rate, including loading, unloading and stacking at the distination , dismantling water tank and removing to store 500-1000ltr , taking down or up steel tubing 15mm dia galvanised alongwith fittings and removing to store , taking down or up steel tubing 20mm dia galvanised alongwith fittings and removing to store , taking down copper or aluminium point wiring , taking down carefully by unscrewing from boards or outlets boxes, fittings and fixtures , taking down serviceable mcb dbs 08 way removing materials to store , taking down serviceable any type and capacity mcbs spn, sp etc removing materials to stoe

CTN :38345635

18 Dec, 2024 17.50 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - office renovation - invitation of bids for conversion of offices outside engineering barrier gate to storage compartments of oil & dope store at oap, mumbai-29 , "dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below " , "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. " , "demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. " , "providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks " , providing and laying internal plaster in c.m.(1:4) 12 to 18 mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. , providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'basf" (master emaco 348 s) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of aiesl/airport premises. , "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade more. fe-500d. " , removing and dismantling existing rolling shutter with ms work in single section or built-up section including rsj, angles, tees, flats, plates, gusset plates, channels etc., including dismembering using gas cutting, cutting machine lowering the same from any level and stacking up to the lead of 50 m. all as directed by eic, etc., complete., including labour, tools , plants etc., complete. , "providing and fixing isi marked flush door shutters conforming to is :2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. "

CTN :38504883

30 Dec, 2024 NA

Multi City - Multi State

Tender For supply of taking down carefully transformer 63kva from pole oblique plinth by dismantling disconnecting ht and lt side , material and labour for shifting of the transformer mounted on plinth pole from existing location to workshop and vice , material and labour hv copper coil replacement , material and labour lv copper coil replacement , material and labour silica gel breather with assembly , rubbersied cork sheet gasket of 6mm thickness , material and labour hv bushing , material and labour lv bushing , material and labour for transformer oil , excavation in trenches not exceeding 1 point 5 m wide and not exceeding 1 point 5 m deep , returning filling in trenches including spreading levelling watering and well ramming in layers not exceeding 25cm , removing excavated material not exceeding 50m and depositing where directed , material and labour for sand filling with clean dry find sand unwashed including , supply and laying unreinforced pre cast flat concrete cable protection cover , supply and laying xlpe insulated screened pvc bedded galvanised steel strip

CTN :38487351

23 Dec, 2024 NA

Multi City - Multi State

Tender For supply, erection, testing and commissioning of 68 m3/hr (15000 gph uk) or higher capacity vt pump set with 15 hp (or higher capacity) motor with rating 415v, 50hz, 3 phase along with starter , pump set specifications shall conform to pcee/grc's latest specification and as per site requirement annexure by consignee of make: wpil, crompton greaves, ksb, kirloskar or similar . the cost is inclusive the cost is inclusive of dismantling, making concrete foundation work, supply of suitable size foundation bolts and all requisite materials.

Central Government/Public Sector

CTN :38456986

26 Dec, 2024 40.00 Lacs

Kangra - Himachal Pradesh

Tender For repair/ replacement of lt underground cables and connected items in various locations at mil stn yol - excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., excavation in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard dense soil, complete all as specified and directed., returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cms thick in any type of soil complete all as specified and directed., removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed., pcc 1:3:6 (nominal mix) type c-2 (using 40mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified and directed., pcc 1:4:8 (nominal mix) type d-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed., sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cms thick, complete all as specified and directed note: punned thickness shall be measured., sub class b brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick including taking out old bricks, complete all as specified and directed., laying only bricks along the length of cable on sand cushioning, with width equal to the length of the brick , complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 80mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., mild steel galvanised iron tubing light grade for cable protection as in road crossing, along poles, walls, floors, drain of 50mm size fixed with ms clamps, nuts and bolts required complete all as specified and directed., dismantling poles/struts, any size and type including insulators and removing from site, complete all as specified., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 300 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 240 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe insulated screened and pvc sheathed armoured electric power lt cable heavy duty with aluminium conductor nominal cross sectional area 185 sqmm 3.5 core for working voltage upto including 1100 volts conforming to is-7098 (part-i) 1988 including taking out existing unserviceable cable, complete all as specified and as directed., supply, jointing, fixing or passing through pipe , trenches or ducts, commissioning and testing xlpe i

Dismantlement Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector