Disposable Knife Tenders

Get complete information related to latest Disposable Knife Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Disposable Knife Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Disposable Knife Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

CTN :39803137

22 Apr, 2025 1.10 Crore

Bangalore - Karnataka

Tender For supply, installation, commissioning and operation of 1000kg per day capacity amla processing plant at karnataka state lamps cooperative federation, mysuru under ntfpce project-fruit washer with elevator: water jet washing of amla fruits and feeding same to screw blancherfunction: for through washing of amla fruits and feeding same to screw blancher construction: it consists of 4 sections; soaking, washing with agitation, fresh water spraying, water draining. stainless steel rectangular shaped tank with legs, cross supports etc. the water in the tank is agitated with the help of high-speed blower through perforated air pipes installed at the bottom of the tank. the bubbles are generated with the help of high-speed air blower, which is an integral part of washer. circulation pump to create water jet to pushing fruits towards elevator. continuous polypropylene stackable slat conveyors with flights the fruit washer tank will be provided with bottom drain connection, water level adjusting arrangement with overflow connection, and fresh water spraying arrangement, feed hopper, discharge chute, motor shroud, chain guard. variable speed drive using vfd motor hindustan/equivalent make, gearbox: bonfiglioli /equivalent make. input capacity: 100 kg / hr. overall dimensions: 2780 mm (l) 770 mm (w) 1874 mm (h) (as per the supplier design and site conditions) elec. power: blower: 0.5 hp, main drive: 0.5 hp circulation pump : 0.5 hp water consumption: 200 ltr m.o.c: ss 304, water recirculation and proper drainage arrangement for the system.feeding table: collecting the amla from the farms and feeding the same to fruit washer 1.2mm thick gauge ss table top and raised edges. drain outlet at one end, square tube structure. size: approx. 1700 mm (l) x 900 mm (w) x 850 mm (h)m.o.c:- wetted parts stainless steel 304 grade (ss 304)belt type continuous blancher function: suitable for blanching of amla fruit for easy separation of the segments. construction: continuous cooking of amla approx. 85 c - 90c.capacity:- 150 kg/hr heating chamber is rockwool insulated & covered by stainless steel sheets. small discharge chute at the end of screw for removing amla fruit out of the chamber. stainless steel self-supporting structure. all necessary steam fittings complete with temperature indicator, y strainer, steam trap, safety valve thermal insulation coating for steam lines and hot lines. retention time approx. 8 to 10 minutes (finalized during detail engineering). stainless steel control panel complete with variable speed frequency drive necessary electrical fittings temperature sensor and auto cutoff steam requirement: 100 to 150 kg. / hr. @ 2.5 kg./ cm2 belt width 400 mm wide 4500 m long approx. suitable for blanching fruits blanching temperature 85c to 95c pp food quality modular belt, suitable for high temperature for smooth operation and high reliability suitable for products transferring in hot water. hot water pump used for water circulation through spray nozzle on top side on the belt, live steam pipe connection to heat the water in the bottom chamber. or direct steam can be purged on the product if suitable to raw material water filter screen and overflow is provided for removingforeign particles. top covers with holding bars, side windows can beopened to easy maintenance and fast cleaning. steam control valve with pid controller for temperaturecontrolling. temp indicator with pt 100 sensor provided for belt speed controlling vfd provided feed and discharge chute of ss-304. drive through simplex chain and chain wheel electrical power: - 0.5 hp water pump & 0.5 hp gear box motor: hindustan/equivalent make, gearbox: bonfiglioli / equivalent make. m.o.c :- s.s 304note: 1. manufacture should ensure that, the amla should not be damaged during blanching process 2. overall dimensions and motor power ratings may vary depending on the manufacturer design and site conditions.blanching tank :semi -automatic operationsuitable for

State Government

CTN :39776814

03 Apr, 2025 76

Multi City - Karnataka

Tender For supply of blood bank drugs and other items to the associated hospitals of mmc & ri, mysuru. - hbsag elisa kit 4th generation, a permanent barrier separate mesh with 3d polymer matrix on parietal side fused to silicon film on the visceral side to prevent adhesions. mesh should have perforations to prevent seromaformation. should have prefix pp sutures 8 x 15, sting free barrier spray with 99 percent blend of hexamethyldisiloxane, hmdso, trimethylated silica, trimethylsiloxysilicate (tms) and 1 percent zanthalene sting free, hypoallergenic, clear with flexible barrier. provides on going protection for 72 hours & chg compatible, free from oil, alcohol, fragrance & preservatives 50ml, standarad opaque drainable pouch 12 inch, with charcoal filter embeded with two sided hydrophobic natural fiber comfort panel with integrated dotted velcro tail closure- 45 mm, hydrofiber burns dresssings with 1.2 percent impregnated ionic silver with a wear time of 21 days & gel forming technology , ce , iso & fda approved 54x45cm, hydrofiber burns dresssings with 1.2 percent impregnated ionic silver with a wear time of 21 days & gel forming technology , ce , iso & fda approved 23x100cm, hydrofiber burns dresssings with 1.2 percent impregnated ionic silver with a wear time of 21 days & gel forming technology , ce , iso & fda approved 23 x 30 cm, inj rituximab 100mg, inj rituximab 500mg, inj. human normal immunoglobuline 10 percent (ivig), malaria parasites (mp card) (each box 40test), rpr rapid plasma reagent (each kit 100)test, inj factor ix 600iu, fiba 500iu, inj factor viii with vwf brand 250iu, nova vii 1mg eptacog alfa (activated), hiv spot tests (rapid), hbs ag spot tests (rapid), antisera ab 10ml, anti h lectin 5ml, anti d (igg) 10ml, anti a1 lectin 5ml, bovine albumin 5ml , hcv spot tests (rapid), hiv elisa 96 tests in one kit 4th generation, hcv elisa kit 4th generation, flow sensor cable draeger vn 600 for vista 120, swab stick, papsmear kit, surfectant 8ml , surfectant 4ml , hb hemoglobin test strips (1 x 50), pure octyl formulation skin adhesive 0.4 gm (90 percent n butyl - 10 percent & 2- octyl cyanoacrylate) , pure octyl formulation skin adhesive 0.8 gm (90 percent n butyl - 10 percent & 2- octyl cyanoacrylate) , hufpuf kit, paracetamol suppository 150 mg , diclofenac suppository, inj. netilmicin, salbutamal inhaler mdi 200 mcg, zerostat, breatho meter, levonorgestrel 52 gms, digital calorie meter, whatsman filter paper (cat no. 1001 - 090) (lot no. 17978437), hemoglobin pippette, inj. l-ornithine - l aspartate, t piece, esr pippette, distilled water (25 ltr), a permanent barrier separate mesh with knitted polypropylene mesh on parietal side fused with poly tetra fluro ethylene (ptfe) film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures 15 x 20, a permanent barrier separate mesh with polyster polymer knitted mesh on parietal side & polyethylene film on the visceral side to prevent adhesions. mesh should have perforations to prevent seroma formation. should have prefix pp sutures 15 x 15, cannula kit for casualty, cannula kit for nicu 26pu cannula pfs 10 ml neonatal, ecg rubber bulb set, clip on electrode set, t. tracheostomy tube, neonatal catheter surfectant 6fr , connecting tubing no. 5154 (medrad company) pressure injector, picc for pre-mature catheter 2 fr x 24 g with stylet, picc for pre-mature catheter 1 fr x 28 g with stylet, draeger ecg cable vista 120, draeger ecg lead vista 120, draeger spo2 probe vista 120, draeger spo2 cable vista 120, draeger vn 600 dual heated circuit, flow sensor for draeger vn 600 & vista 120, gadolinium based macrocyclic non ionic contrast 1mmol/ml 5ml/10ml , non ionic contrast 100cc 300/350mg , non ionic contrast 50cc 300/350mg , non ionic contrast 100cc 350/370mg (for angiography studies) , twenty percent sulpho salicylic acid solution 500 ml, bisacodyl suppository ,

CTN :39693305

03 Apr, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of capacitor panel mounting polypropylene film radial 4 uf,capacitor panel mounting polypropylene film radial 20 uf,capacitor panel mounting electrolytic plastic can 36 uf,capacitor leaded double metalized polypropylene radial 0.75 uf,capacitor leaded aluminum electrolytic radial 1000 uf,capacitor leaded aluminum electrolytic radial 220 uf,capacitor leaded double metalized polypropylene radial 0.1 uf,capacitor panel mounted aluminum electrolytic radial 4700 uf,capacitor igbt mounting polypropylene film 0.22 uf,capacitor panel mounting polypropylene film threaded stud m12 3 x 57 uf,fan blower 230 vac,fan axial 6 inch 240 vac

Loading, Please wait...

Disposable Knife Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government