Latest dosing pump spares Tenders | Government dosing pump spares Tenders

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government / Public Sector

CTN :37406218

18 Nov, 2024 NA

Panipat - Haryana

Tender For corrigendum : metachem make dosing pump spares - , worm shaft,p/n- r1, drive shaft,p/n- b2,, crank ,p/n- t27, connecting rod ,p/n- r9/r12,, spacer ,p/n- b7, thrust ring,p/n- t12, complete pump,metachem,mc-3r, guide pin ,p/n- t26, oil seal ,p/n- r8,, cross head pin ,p/n- r13, c/s hd screw /crclip ,p/n- r14, oil seal ,p/n- r15,

Central Government / Public Sector

CTN :37406238

18 Nov, 2024 NA

Panipat - Haryana

Tender For corrigendum : alweyn make dosing pump spares - list of item(s) / work(s) as per tender documents, worm wheel.p/n:30, worm shaft,p/n:31, crank,p/n:5, eccentric,p/n:8, control pin,p/n:6, connecting rod,p/n:7, cross head,p/n:20, plunger,p/n:22, packing,p/n:23, pump,complete,model:cvp-1636,alweyn, suction valve assembly,pump,alweyn, discharge valve assembly,pump,alweyn

corporations/Associations/Others

CTN :38155694

14 Nov, 2024 6.81 Lacs

Chandigarh - Chandigarh

Tender For rewinding of 375 hp electric motor and repair of horizontal split casing pumping set, vacuum pump and other allied works at pump house water works sector 39 chandigarh

corporations/Associations/Others

CTN :38139313

28 Nov, 2024 NA

Donimalai - Karnataka

Tender For supply of proc of flocculant dosing pump spares - stator model-t1s 50.1 flocculent dosing pump, model no t1s 50.1 1600026500 , stator, flocculent dosing pump, model no-t1s 100.1 1600024034 , coupling rod jointkit t1s 50.5 flocculent dosing pump, model no-t1s 50.1 1600026502 , seal for gasket and o ring mod 50.3 flocculent dosing pump, model no-t1s 50.1 1600026501 , seal for gasket and o ring, flocculent dosing pump,modelno-t1s 100.1 1600024035 , coupling rod joint kit, flocculent dosing pump, model no-t1s 100.1 1600024036 , mechanical seal floculant dosing pump, model no-t1s 100.2 1600026499

CTN :38134007

27 Nov, 2024 NA

Bathinda - Punjab

Tender For supply of 88 ah 12 volt battery , 130 ah 12 volt battery , 150 ah 12 volt battery , 63 amp change over switch , 100 amp change over switch , mcb 3 pole 63 amp , 32 amp mcb 3 pole , distilled water , 25 sqmm 4 core aluminium conductor pvc cable , 16 sqmm 4 core aluminium conductor pvc cable , exhaust fan motor , lube filter 16061 , oil filter 04 270 01 , fuel filter 06 474 05 , air filter 586 005 , water seperator filter , pre filter , fuel pipe , 62 kva genr fan belt , 30 kva genr fan belt , alternator belt , brake master cylinder assyembly , assembly wheel brake master cylinder , edc assembly , filter opening wrench , trailor tow bar , door lock , bty charge alternator , self pinion , benjo washer , fly wheel , contact relay , battery terminal , timble aluminum , over flow pipe 06 cyl , fuze 110 to 220 w , feeding pump , benjo belt , pumping set fuel filter , injector nozzle , pump element , head gasket , piston ring , water pump assembly , gasket , impeller , ro 500 lph filter , membrane , activate 800 ib carbon , low pressure switch , tds controller , sand filter , chemical

Corporations And Associations And Others

CTN :38143661

18 Nov, 2024 27.30 Lacs

Rohtak - Haryana

Tender For supply, erection, commissioning and testing of horizontal motor pumping set for clear water of 1 no. 100 hp induction motor having 1440 rpm, 1 nos. clear water motor 40 hp having discharge of 2220 lpm, 3 nos. non- clog sewerage motor pumping set 40hp

Central Government/Public Sector

CTN :38124289

18 Nov, 2024 NA

Tiruvallur - Tamil Nadu

Tender For 5hp non clog submersible sewage pump set, pumping capacity 72 cubic meter per hour at 8 mtrs head with speed 1450 rpm, complete with water protected seal for continuous operating 415v, 50 h z, supply with 10 mtrs, resin filled control cable and 10mtrs s.s chain with shackle and suitable fully auto matic three phase starter control panel (dol/star delta starter which is suitable for that pump) along with s ingle phase preventer with phase reversal sensing and dry run relay protection (current sensing type), ther mistor relay and moisture control relay, analog /digital voltmeter , analog /digital ammeter , power on/trip and indication lamps, on/off switch and auto/manual mode switch (authorized dealership certificate to be e nclosed while submitting offer, test certificate and warranty certificate to be submitted along with supply). make: ksb or kirloskar or mbh or karvel or similar. [ warranty period: 24 months after the date of de livery ]

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Dosing Pump Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors