Tender For supply of complete portable grease pump system-1. 10kg/min with 30 kg bucket-7500 psi outlet pressure. as per specification attached. [ warranty period: 30 months after the date of delivery ] ]
Tender For repair and comprehensive maintenance of swimming pool plant and equipments fire fighting system at af stn nal under ge (af) nal - comprehensive annual maintenance of swimming pool comprises of the following equipments complete all as specified and directed.(a) pumping sets of capacity 3.5 hp - 05 nos (01 as standby) (b) pressure filter of filtering capacity 50 cum/hr - 04 nos (01 as standby)(c) dosing pump - 02 nos (one for chlorination and one for soda ash)(d) electrical panel board consisting of starters of suitable rating complete.note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit swimming pool once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of swimming pool.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) cleaning all swimming pool building inside, plant room, equipments including surrounding area of the buildings. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5hp / 3.26 kw capacity and all other connected items., comprehensive annual maintenance of fire fighting system in sekhon hall , new tech flight, sre and new atc of the following equipments complete all as specified and directed.(a) main fire pump with centrifugal motor of existing capacity- 04 nos (b) jockey fire pump with electric motor of existing capacity - 04 nos (c) makeup fire pump- 04 nos(d) dg fire pump with engine - 04 nos note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , new tech flight and new atc once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of installation.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account.(iii) cleaning all fire fighting installation buildings (sekhon hall , new tech flight and new atc) inside, plant room,equipments including surrounding area of the building. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing capacity and all other connected items., s&f in repair pressure pump limit switch of capacity 1psi to 4 psi and 230 volt as per existing make and model fixed on pressure booster line complete all as specified and directed., supply, installation, testing and commissioning in repair of detectors complying with and type certified to en-45 addressable type multi sensor detector with heat and smoke combination with base with self built intelligence as per is:11360 (for annexes) complete all as specified and directed., supply, installation, testing and commissioning in repair of addressable manual call point / pill station resettable type with base complete all as specified and directed, supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continuous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed, supply and fixing in repair addressable monitor module for activating the sirens complete all as specified and directed, taking out old unserviceable hose box by cutting and welding and s&f hose box made of 18 gauge ms sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge ms sheet for keeping 2 nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and directed., supply
Tender For supply of 01021801 o rings lop model pdfu-60.4n , 01021801 compensation bush , 01021801 oil seal pump model pdfu- 60.4n , 01021801 rotor bush , 01021801 cartridge asemb mill lop , 01021801 grease retainer ring , 01021801 mill lop model pdfu-60.4n , 01021801 return valve assembly , 01021801 support plate mill lop
Tender For corrigendum : supply of distance ring , lock washer for impeller nut , bearing holder , lock washer for bearing nut , rubber bearing for impeller shaft one , rubber bearing for intermediate shaft , rubber bearing for impeller shaft two , rubber bearing for impeller shaftthree , sealing ring , shaft sleeve drive side , shaft sleeve for bearing spider , impeller shaft sleeve , thrust bearing carrier , washer for coupling pin , nut for coupling pin , lock nut , bearing nut , key for thrust collar , liquid deflector , o ring for head unit one , o ring for column unit , o ring for pump unit one , o ring for head unit two , o ring for pump unit two , o ring for pump unit three , o ring for pump unit four , o ring for head unit three , coupling pin , coupling bush , split ring for muff coupling , key for pump coupling , ratchet pin , thrust bearing lid , thrust bearing segment , journal bearing , stuffing box housing , compression spring , gripping washer , key for impeller shaft sleeve , bearing spider , impeller nut , shaft sleeve nut , pump casing hde , impeller , shaft , impeller nut , inspection hole cover , key for impeller , casing wear ring , brg. nut , round lock nut , bearing pedestal , bearing cover de , bearing cover nde , coupling key , grease nipple , cyl roller brg skf nu2319o r eq , spe roller brg skf 22319 e or eq , casing cover , split gland , shaft sleeve
Tender For supply of material code -72975011510 - pointed adaptor for grease gun ah4 std , material code -72975011750 - pn grease pump repair kit ah4 50 std , material code - 72975011820 - hand operated grease pump repair kit ca , material code -72975012250 -grease nipple straight p n 130400876 , material code -72975012320 - grease nipple , material code -72975012490 - grease nipple button head , material code -72975012560 - grease nipple straight , material code -72975030380 - conn hose with end fittings for grease , material code -72975031190 - grease hose 15mr long with end fittings , material code -72975050030 - hand ope gre pump , material code -93469000010 - elgi oil pump an 4 std 200 , material code -93469005060 - high pr grease pump model ah4 std
Tender For corrigendum : supply of pump repair kit, part no. 241623 , clc 4400 controller, part no. 24b591 , polymide hose 8.4 mm od x 4 mm i.d 50mtr, part no. gha8404 , kit, installation, control module, part no. eec247538 , valve, 3 way solenoid, part no. eec115775 , valve, flow regulating, part no. eec115773 , valve, pressure reducing, part no. eec121206 , 3 point manifold, 3500 psi, part no. eec134363 , 4 point manifold, 3500 psi, part no. eec134364 , 5 point manifold, 3500 psi, part no. eec134365 , complete elbow fitting 1 by 8 npt, part no. eec60251 , ferrule 06l, part no. eec60252 , coupling nut m6, part no. eec60253 , hose stud for hose 8.4, part no. eec60254 , hose sleev polymate hose od 8.4mm, part no. eec60255 , stright fitting ge 06s, 1by8 bsp, part no. eec60256 , 06l str union, part no. eec60257 , kit dust cap, part no. eec60259 , pro shot grease dispense valave, part no. 242056
Tender For corrigendum : supply of fuel filter , oil filter , hyd filter , steering filter , jack cyl seal , hyd mtr , track chain seal , his mtr cable , terminal , mud filter , air filter , painting gun with air line , fan belt , bty post lead , feed pump , lifting pump , accelerator cable , break bulb , jcb cabin fan , air filter , service kit mpt , mpt staring ignition switch , heavy duty socket , lashing belt for jcb and mpt , heavy duty knot opener machine , mini socket set , washing pump with motor 3hp single phase , washing pressure pipe , pressure adopter , and bond , hammering paper , m seal , third tape , grease gun adopter , adjustable , grease gun 8 kg , hose pipe 1 and half inch
Tender For purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter