Latest drawers Tenders | Government drawers Tenders

CTN :38308474

19 Dec, 2024 NA

Raichur - Karnataka

Tender For corrigendum : supply of modular metal drawer file cabinet pedestal

CTN :38560925

19 Dec, 2024 27.23 Lacs

Delhi - Delhi

Tender For upgradation work in gpra flats at chanakyapuri, new delhi dg 2024-25 (sh: providing and fixing 20 factory made modular kitchen cabinet for d-i, d-ii & c-ii flats).subwork/packages:upgradation work in gpra flats at chanakyapuri, new delhi dg 2024-25 (sh: providing and fixing 20 factory made modular kitchen cabinet for d-i, d-ii & c-ii flats).

CTN :38560940

19 Dec, 2024 26.65 Lacs

Delhi - Delhi

Tender For upgradation of various qtrs at sector-4, r.k. puram, new delhi dg 2024-25 (sh: providing and fixing modular kitchen cabinet).subwork/packages:upgradation of various qtrs at sector-4, r.k. puram, new delhi dg 2024-25 (sh: providing and fixing modular kitchen cabinet).

State Government

CTN :38592870

26 Dec, 2024 NA

Ranaghat - West Bengal

Tender For supplying, fitting, fixing and installation of 6 nos. l shaped pattern office desk size range 2.40 m x 0.60 m x 0.80 m an overhead file cabinet size range 3.60 m x 0.45 m x 0.45 m made of 20 mm plywood along with drawers and other allied acces

corporations/Associations/Others

CTN :38521342

18 Dec, 2024 4.30 Lacs

Manjhanpur - Uttar Pradesh

Tender For corrigendum : office furniture for sub division saini p. sharira bharwari - loading, unloading and safe carriage of following materials from contractors store to subdivisions-saini/paschim sharira/bharwari, executive wooden table shape-l shape, rectangular, seating capacity-1, no of drawers-3 with locker, surface finish-paper finish, condition-new, table height-2.5 feet with one year warranty., revolving chair-adjustable seat height, wheels, head support, seat lock, armrest, locking mechanism, wxh-58.4cmx106.7 (1 fit 10 inchx3fit 6 inch), bend direction-outward,, other dimensions-max seat height 55.9cm, depth-48.3cm, height-48.3cm with one year waranty., wooden table 3feetx5feet, shape-rectangular, seating capacity-1, no of drawers-2 with locker, condition-new, table height-2.5 feet with one year warranty., armrest head support chairs- wxh 48 cm*80 cm (18x31 inch), fittings chair seat back frame from floor to top is +-1030mm a 400x400 mm seat synthetic fibre, with one year warranty., almirah (small size)- contemporary & storage & documents, wxhxd-50x30x17 inch,no of shelves-3, material-metal/stainless steel with one year waranty., almirah (big size)- contemporary & storage & documents, wxhxd-78x36x19 inch, no of shelves-5, material-metal/stainless steel with one year waranty., rack- 6 shelf slotted angle rack dimension 12"x36"x72", hight-72" storage for files of office., steel bench 5 seater of stainless steel waiting chair with backrest

Central Government/Public Sector

CTN :37225469

23 Dec, 2024 NA

Udaipur - Rajasthan

Tender For corrigendum : supply of executive table (v2) (q3) ( pac only ) , credenzas (q3) ( pac only ) , sofas (v2) (q3) ( pac only ) , centre table (q3) ( pac only ) , modular metal drawer file cabinet pedestal (q3) ( pac only ) , modular work stations (v2) (q3) ( pac only ) , almirah steel (v2) (q3) ( pac only )

Central Government/Public Sector

CTN :38588860

03 Jan, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of crc island workbench wet lab, 4 storage,modular wall facing workbench l shape with 7 base cabinet,modular wall facing workbench with 1 base cabinet,fume hood, dimension 1500x900x2250mm,,blower, 1000 cfm chemical and heat resistant pp frp blower with aerodynamically balanced impeller,pvc 200 mm , 250 mm dia ducting,cross over bench 1500x300x300,garment storage cabinet size l 1000 x d 450 x h 1830 mm,glass shutter full height cabinet,revolving executive chair,internal electrical connection - 2.5 cable cover with flexible pipe and pvc casing from inside of lab.,internal water pipeline connection- for labs b.1. pvc pipe 25 mm,modular island workbench with 8 base cabinet,modular wall facing workbench with 4 base cabinet,modular wall facing workbench with 6 base cabinet,fume hood dimension- 1500x900x2250mm, table top- granite,centrifugal blower- 1000 cfm chemical and heat resistant pp frp blower,pp frp ducting, 150mm dia. 200mm dia. 250 mm dia,emergency shower cum eye wash fountain water inlet and drain,demonstrati

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

State Government

CTN :38526161

26 Dec, 2024 81.62 Lacs

Ajmer - Rajasthan

Tender For supply and fixing of furniture at new office building - officer working table. providing & placing executive officer working table made out of 18mm thick isi marked water proof, termite proof, borer free plywood with 1.00mm thick decorative laminate of approved shade on external, internal and under surfaces all around of table duly pasted with isi marked adhesive of approved make all work as per directions and satisfaction of engineer incharge. brief specifications of table are as under: a) table size 1800(w) x 1200 (d) x 750 (h) all dimensions in mm. b) all framework and supporting arrangements for table and top shall be made of seasoned 2nd class teak wood duly primed with approved primer and finished with melamine polish in matt / gloss finish.c) the table top, side panels & front modesty shall be made up of 18mm thick isi marked plywood with 1.00mm thick decorative laminate on external,internal and under surfaces of table duly pasted. d) cpu & keyboard arrangements. integrated wooden shelf for cpu & foldable arrangements for placing keyboard separately made out of 18mm thick isi marked plywood & 1.00 mm thick decorative laminate all around shall be provided. e) under table storage : one under table drawer type storage cabinet having 03 nos. drawers. the internal dimenisions of top two & last drawers shall be 350(w) x 480(d) x 150(h) & 350(w) x 480(d) x 350(h)in mm respectively. the storage cabinet shall be made of 18mm thick plywood with 1.00mm decorative laminate on outer, inner and all surfaces. all drawers, shelves, doors etc shall be made with 18mm thick plywood with 1.00mm thick laminate on inner surfaces. all drawers shall run on telescopic channel set. the telescopic channels shall be of make hettich/ godrej/ hafele/dorset/ ozone . the drawers and shutters shall have proper metallic brass/ copper/ stainless steel/ brushed finish handles of adequate size and proper seperate locking arrangements.f) electrical & other accessories arrangements. the table shall have proper concealled provisions for accommodating power, telephone, lan, audio & video cables, electrical points with switches, sockets, ports for electric, telephone, intercoms, lan, computer systems, monitors, pbax, printers etc. of approved make and requirements.suitable space shall be provided for visitor chairs. all edges shall be sealed with 2nd class teak wood rounded moulding. the edge moulding shall be treated and finished with melamine polish.all work complete including fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, directions and satisfaction of engineer incharge., officer working table. providing & placing executive officer working table made out of 18mm thick isi marked water proof, termite proof, borer free plywood with 1.00mm thick decorative laminate of approved shade on external, internal and under surfaces all around of table duly pasted with isi marked adhesive of approved make all work as per directions and satisfaction of engineer incharge. brief specifications of table are as under: a) table size 1500(w) x 900 (d) x 750 (h) all dimensions in mm. b) all framework and supporting arrangements for table and top shall be made of seasoned 2nd class teak wood duly primed with approved primer and finished with melamine polish in matt / gloss finish.c) the table top, side panels & front modesty shall be made up of 18mm thick isi marked plywood with 1.00mm thick decorative laminate on external,internal and under surfaces of table duly pasted. d) cpu & keyboard arrangements. integrated wooden shelf for cpu & foldable arrangements for placing keyboard separately made out of 18mm thick isi marked plywood & 1.00 mm thick decorative laminate all around shall be provided. e) under table storage : one under table drawer type storage cabinet having 03 nos. drawers. the internal dimen

CTN :38506672

23 Dec, 2024 NA

Salem - Tamil Nadu

Tender For purchase of furniture to the dept. of biotechnology, pu. - purchase of furnitures (please refer to the tender notice for the detailed specifications and terms and conditions), wall table:(table top made up of 20mm thick jet-black granite size 2400mm l x750mm b height of table 900mm table made up of 20 swg gi sheet with epoxy powder coated with three set of drawers (size l:720mm x b: 520mm x h: 120mm) with lock, two set of both end cupboard with two drawers (size 600mm bx800mmlx470mmh) with adjustable horizontal rack including tower bolt lock and handles 10nos centre open with foot rest), revolving chair:1. arm type: fixed arms2. color: white3. seat material: wire net4. size: high back5. back type: air flow wire6. standard dimensions (l x w x h) l=23in, w=19in, h=44in7. leg material: steel/chrome8. adjustable height, adjustable back, revolving9. number of wheels: 5

Drawers Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government