Latest dry sand Tenders | Government dry sand Tenders

Central Government And Public Sector

CTN :39832460

16 Apr, 2025 34.90 Lacs

Agra - Uttar Pradesh

Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co

CTN :39832798

09 Apr, 2025 6.13 Lacs

Multi City - Karnataka

Tender For supply of materials for the constrcution of sanjivini shed in kallenahalli gp, ajjampura taluk, chikkamagaluru work under mgnregs scheme - labour charges for handing errection of rcc rings etc. at 5%(kall), transportation charges of materials beyond 5 km at 10%(kall), fabrication charges.(kall), cost of 6.5mm m.s. coil(kall), bib cock 20mm nominal bore(kall), polythylene pipes high density 32mm external dia(kall), add 5% for fittings and wastage charges(kall), add cement sand and grit 1% on material(kall), pvc pipe of 4kg/cum,75 mm(kall), pvc pipe of 6kg/cum,63 mm(kall), pvc pipe of 10kg/cum,110 mm(kall), handling loading and unloading 3% on material(kall), labour charges for lifting and placing in position and making connection at 7% on material(kall), polyenthylene water storage tank of specified capacity l(kall), licenced plumber with tools(kall), lead or pvc connection pipe 32mm dia (for wash basin)(kall), c.i. / m.s. brackets for flushing cistern(kall), brass stop cock(kall), cp brass waste 32 mm of standard pattern(kall), cp brass chain with plug(kall), copper plated brass piller tap 15mm(kall), white vitreous china clay flat back wash basin size 550x400mm(kall), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(kall), s or p trap 100mm(kall), indian type water closet of size 580 mm of specified make with footrests(kall), add white cement for pointing at 2% on material(kall), border tiles 30 x 10 cms(kall), glazed tiles 300x450(kall), white cement(kall), ceramic tiles 30 x 30 cms(kall), vitrified tiles 600x600 mm(kall), add brush, putty, sand paper at 3% on cost of paint(kall), enamel paint(kall), mason class ii (with tools)(kall), add brush, putty, sand paper at 2% on cost of paint(kall), water proofing cement paint(kall), add brush, putty at 5% on cost of distemper primer(kall), distemper primer(kall), add brush, putty, glue at 5% on cost of paint(kall), whitening(kall), dry distemper(kall), lime(kall), add providing and removing scaffolding at 3% on labour(kall), painter class i(kall), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(kall), ready mix primer paint (ready mix red lead paint)(kall), add(kall), welder grade i(kall), fitter class i(kall), z section(kall), reeded glass 2 mm thick(kall), tw beading for fixing glass(kall), stays(kall), hinges 5inch heavy duty(kall), handles(kall), ms clamps(kall), mullion section(kall), t section(kall), honnewood planks for panels 20 mm thick(kall), honne wood(kall), unit cost as per the specification(kall), hom of machinaries for planing(kall), add cutting and other wastage 5%(kall), mathi/nandi wood planks for panels 25 mm thick(kall), binding wire(kall), tmt bars fe 500(kall), casurina poles 75 - 100 mm dia(kall), mason class i (with tools)(kall), solid concrete block (40x15x20 cms)- 5.00 n/sqmm(kall), add handling , loading and unloading at 1% on material(kall), burnt bricks class 35 (non modular)(kall), add watering charges at 1 % on labour(kall), add handling , loading and unloading at 2% on material(kall), casurina poles 100 - 150 mm(kall), silver oak or equivalent planks 38 mm thick(kall), jungle wood runners and planks(kall), mixer (concrete small used in culvert)(kall), boulders(kall), bond stone 20 x 20 x 45 cm(kall), size stone 20 x 20 x 25 cms(kall), hom of vibrator 0.71 days(kall), plasticizer / super plasticizer(kall), formwork, centering & scaffolding for columns & piers(kall), add watering charges at 1 % on material(kall), mixer (concrete) - 1 cum capacity(kall), portland cement(kall), coarse sand (zone iii)(kall), broken stone aggregate 12 mm to 10 mm size(kall), broken stone aggregate 20 mm size(kall), broken stone aggregate 40 mm size(kall)

CTN :39832784

07 Apr, 2025 83.82 Lacs

Raichur - Karnataka

Tender For package-i supply of materials to various road works in maski taluka of raichur district. under mgnrega for the year 2024-25 - granite metal of size 40mm, crushed stone course aggregate 53 size, fine aggregates 10mm size, vibratory roller 8 tonne capacity, water tanker charges, gravel 2.36mm/murrum for road, water for consolidation, tractor-40 hp per hour

CTN :39832792

07 Apr, 2025 55.88 Lacs

Raichur - Karnataka

Tender For package-ii supply of materials to various metalling road in maski taluka of raichur district. under mgnrega for the year 2024-25 - granite metal of size 40mm, crushed stone course aggregate 53 size, fine aggregates 10mm size, vibratory roller 8 tonne capacity, water tanker charges, gravel 2.36mm/murrum for road, water for consolidation, tractor-40 hp per hour

CTN :39832801

07 Apr, 2025 80.43 Lacs

Raichur - Karnataka

Tender For package-iii supply of materials to various metalling road in maski taluka of raichur district. under mgnrega for the year 2024-25 - providing water tanker 6 kl capacity, providing concrete joint cutting machine for initial and final cuts, providing plate vibrator, providing concrete mixer 0.4/0.28 cum capacity, providing plasticizer/super plasticizer, providing bituminous sealant 800 ml per joint 23 joints, providing polythene sheet 125mm micron, broken granite metal 20mm size, broken stone aggreegates of 40mm size, providing coarse sand (zone iii), providing portland cement to site, granite metal of size 20mm, granite metal of size 40mm, crushed stone course aggregate 53 size, fine aggregates 10mm size, vibratory roller 8 tonne capacity, water tanker charges, gravel 2.36mm/murrum for road, water for consolidation, tractor-40 hp per hour

CTN :39832805

07 Apr, 2025 81.27 Lacs

Raichur - Karnataka

Tender For package-iv supply of materials to various metalling road in maski taluka of raichur district. under mgnrega for the year 2024-25 - granite metal of size 40mm, crushed stone course aggregate 53 size, fine aggregates 10mm size, vibratory roller 8 tonne capacity, water tanker charges, gravel 2.36mm/murrum for road, water for consolidation, tractor-40 hp per hour

CTN :39832816

07 Apr, 2025 69.85 Lacs

Raichur - Karnataka

Tender For package-vi supply of materials to various metalling road in maski taluka of raichur district. under mgnrega for the year 2024-25 - granite metal of size 40mm, crushed stone course aggregate 53 size, fine aggregates 10mm size, vibratory roller 8 tonne capacity, water tanker charges, gravel 2.36mm/murrum for road, water for consolidation, tractor-40 hp per hour

CTN :39832819

07 Apr, 2025 86.95 Lacs

Raichur - Karnataka

Tender For package-vii supply of materials to various metalling road in maski taluka of raichur district. under mgnrega for the year 2024-25 - granite metal of size 40mm, crushed stone course aggregate 53 size, fine aggregates 10mm size, vibratory roller 8 tonne capacity, water tanker charges, gravel 2.36mm/murrum for road, water for consolidation, tractor-40 hp per hour

CTN :39804442

07 Apr, 2025 7.65 Lacs

Alappuzha - Kerala

Tender For ward 12 mangodath kalathil road metaling - supply, quarry waste, good earth, stone aggregates : 80 mm nominal size, stone aggregates : 63 mm nominal size, stone aggregates : 50 mm nominal size, stone chippings/ screenings 10/11.2 mm nominal size, stone chippings/ screenings 4.75 mm nominal size, stone chippings/ screenings 150 micron nominal size, hire charges of diesel road roller- 8 to 10 tonne, stone for masonry work, stone aggregate 20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02 3.75m), twisted steel/deformed bars, r.c.c. pipes np2 class 600 mm dia, r.c.c. collars np2 class 600 mm dia, fine sand (zone iv)

CTN :39804460

07 Apr, 2025 7.24 Lacs

Alappuzha - Kerala

Tender For ward 7 south subcenter mukkam road metaling - supply, quarry waste, good earth, stone aggregates : 80 mm nominal size, stone aggregates : 63 mm nominal size, stone aggregates : 50 mm nominal size, stone chippings/ screenings 10/11.2 mm nominal size, stone chippings/ screenings 4.75 mm nominal size, stone chippings/ screenings 150 micron nominal size, hire charges of diesel road roller- 8 to 10 tonne, stone for masonry work, stone aggregate 20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02 3.75m), twisted steel/deformed bars, r.c.c. pipes np2 class 900 mm dia, r.c.c. collars np2 class 900 mm dia, fine sand (zone iv)

Dry Sand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector