Latest dryer kit Tenders | Government dryer kit Tenders

CTN :38216409

04 Dec, 2024 NA

Bikaner - Rajasthan

Tender For supply of wind screen glass,clutch master cylinder,slave cylinder assy,assy fuel filter,assy fuel pre filter,coolant hose,assy oil filter,air filter element,air dryer kit,return line hose assy

Central Government/Public Sector

CTN :38175607

20 Nov, 2024 2.56 Lacs

Dipka - Chhattisgarh

Tender For supply of grinding paste emary paste coars 400 grm pack , paste type smooth grinding container capacity 400 grm fine , element heating coil 230 v 3000 w chemical heating coil 230 v 3000 w , hose air inside diameter 1 by 2 inch type pneumatic , sheet gasket type non metallic steam joint thickness 1 by 32 inch material ferolite , paper abrasive type fine sand grit 120 , paper abrasive type emery grit 100 , paper abrasive type emery grit 150 fine , paper abrasive wet and dry 230 x 280 mm grit180 , chemical petroleum jelly vaseline , wheel abrasive type grinding inside diameter 7 mm outside diameter 180 mm thickness 22point 23 mm , wheel abrasive type grinding inside diameter 6 mm outside diameter 100 mm thickness 16 mm , adhesive steel epoxy 113 gms loctite pkt , loctite 587 rtv blue maxx silicon compound 95 gms tube , sealant thrd loctite 565 ealant type thread brand name loctite 565 , compound loctite 638 retng compound brand name loctite 638 type retaining , cleaner rust wd 40 420 ml bid number/ ( ( ) ): gem/2024/b/5576647 dated/* : 09-11-2024 bid document/ 2 1 / 22

Central Government And Public Sector

CTN :38164200

25 Nov, 2024 NA

Multi City - Multi State

Tender For heating element mould pre heat heating [heating element mould pre heat heating element of 2.9kw at 110v, the heating element shall be of kanthal-a1 material. the dimensional and other details shall be as per drg.no.rwf/el/sk/wsc/he-2015-002 r-2 dt:31/03/2022. raw material test certificate for kanthal a1 to be submitted at the time of supply. the certificate shall be from the laboratory accredited nabl. warranty: 06 (six) months from the date of installation or 12 months from the date of supply against any manufacturing defects. note: before making bulk supply one sample to be got approved by sse/el/wsc with the relevant certificate if the supplier is offering for the first time]

Central Government And Public Sector

CTN :38113751

25 Nov, 2024 NA

Yelahanka - Karnataka

Tender For corrigendum : heating element mould pre heat heating element of 2.9kw at 110v, the heating eleme nt shall be of kanthal-a1 material. the dimensional and other details shall be as per drg.no.rwf/e l/sk/wsc/he-2015-002 r-2 dt:31/03/2022. raw material test certificate for kanthal a1 to be submit ted at the time of supply. the certificate shall be from the laboratory accredited nabl. warranty: 06 ( six) months from the date of installation or 12 months from the date of supply against any manufactur ing defects. note: before making bulk supply one sample to be got approved by sse/el/wsc with the relevant certificate if the supplier is offering for the first time [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :38064191

14 Nov, 2024 NA

Panipat - Haryana

Tender For supply of u shaped tube type air heating elements of rating 2 kw, 240volt ac tube dia 8.2 mm, material used ss

CTN :38078121

19 Nov, 2024 1.00 Lacs

Bardhaman - West Bengal

Tender For supply of door lock, cmc repair kit, brake fluid container , gear leaver kit, fuel pipe, fuel pipe, acc cable, clutch plate, cmc kit, csc kit, csc kit, cmc kit, door locking handle, speedo meter cable, door outer handle , door vosor gypsy, cmc repair kit, csc repair kit, cmc repair kit, csc repair kit, fuel pipe, 19 no bolt, air caps, 4x4 oil seal, 21 no bolt, washer , bolt bracket 44 no, vj crass, air dryer kit, fan belt , sleave cyl kit, sleave cyl steel pipe, pressure plate assy 310 dia, clutch plate 310 dia, qsp valve wa, brake lining, clutch hose, coolent hose, coolent hose, clutch cyl km, sleave cyl kit, annabond, lock washer, coolent hose, hub oil seal inner, hub oil seal outer, cyl head gasket, brake lining, deration tank, crank seal, insulation tape, anabond, gear lever kit, temp meter 24 volt, csc kit, sc kit, solenoid switch 12 volt, hose clamp, lt wire 8mm, air presser pipe

Central Government And Public Sector

CTN :38112740

26 Nov, 2024 NA

Damanjodi - Odisha

Tender For supply of 3000009721_1_12701100009 set of steam heating bundle for digestion tank. one set consists of 50 nos bundle.tank no-1012(phase-4)as per drg nomech/5802. steam heating bundle design data:- a) working media = mp steam at 9 kg/cm2 & at 220 deg cent. b) each tube bundle is to be hydro tested at 12 kg/cm2 and hyd. test certificate to be provided along with supply. c) moc of the heating element = ibr seamless pipe, astm a-106 gr-a, material test certificate to be provided along with supply d) vendor may take final dimension from site before manufacturing if required. e) all welding should be radiographic tested. f) warranty- sullied tube bubnle should bear the warranty of 18 months from date of sulpply or 12 months from date of firment which ever is earlier for any leakage/crack of tubes. g) payment term- 90% of basic value will be realeased after inspection at nalco site, balance 10% after expire of warranty period or against 10% pbg (performance bank guarantee). h)condition for acceptance of bid-vendor must have supplied similar tube bundle/heating coil /boiler tubes to any psu/govt sector/chemical plant of value not less than 12 lakhs since last 3 years. po copy with tax invoice are to be subitted along with bid document to consider their offer for technical evaluation. 1 set-quantity - 1-msme exemption - no | startup exemption - no

CTN :38124242

06 Dec, 2024 NA

Gaya - Bihar

Tender For supply of strip type heating element power-18kw, 120-volts, made up of kanthal af ma terial. specification: 1. rating-18 kw @ 120 volts, 2. resistance -0.80 ohm +/- 5 percent, 3. section -25 x 2.5, 4. total element length-63 x 44= 2772 mm, 5. no. of bends-63, 6. material -kanthal (af), 7 . furnace temperature: 1200 degree c, 8. material consumption-cr: 22 percent al: 5.3 percent, fe-re st. details as per drawing enclosed. [ warranty period: 30 months after the date of delivery ]

CTN :38075047

25 Nov, 2024 NA

Imphal - Manipur

Tender For supply of plastic laminated sheet teak face 8ft x 4ft x 1mm , black board commercial 8ft x 4ft x 18 mm , pvc sheet for chair dining map fd , mordant solution , cushion for sofa set 100 mm thick 32 mm density 21inchx 22inch , fevicol sh , aluminium sheet 22 swg , dendrite , lock for almirah steel , newar nylon 25mm width , white , looking mirror for table dressing ladies size 360x1120x5mm , knob decorative acrylic , base wheel for chair revolving executive , french polish , teak wood beading 12mm x 4mm x 2m , channel aluminium 12mm , varnish , door handle aluminium 100 mm , pegs aluminium 75mm , beeding pvc of size 16x6mm , handle for almirah medium steel 150mm cp , legs for dining table of size 800 x 75 x 50 mm , curtain rod stainless steel 15 to 20mm 6mtr long , teak wood beading 19mm x 4mm x 2m , handle for almirah medium steel 100mm cp , pegs aluminium 125mm , teak wood legs for teapoy size 550x60x30mm , continious piano hinge , hasp and stapple aluminium 100mm , rubber cap for chair cb steel , painting brush 75mm , door handle aluminium 75mm , legs for peg table size 420 x 50 x 30 mm , rubber or pvc shoes for chair dining , rubber or pvc shoes for chair tublar steel , painting brush 50mm , butt hinges ms 100 mm , painting brush 25mm , ms screw wood 15mm , butt hinges 25mm , rubber or pvc shoes for table dining or writing , pencil carpenter , 10 nos in each pkt , mirror for table dressing ladies made in teak wood frame of size 25 x 19mm overall size 1220mm height x 355mm wide fixed at 150mm from top of lower base alongwith mirror 5.5mm thick. , gi tubing 32 mm , seat for chair cb steel without arms , handle for chair revolving executive , paint white 1st grade synthetic enamel , white spirit , cp knob 25mm , looking mirror table dressing gents 360x700x5mm , hasp and stapple ss 75mm , haps and stapple ss 125mm , beeding pvc of size 12 x 6mm x 8ft long , painting brush 100mm , elbow 3 way gi 32 mm dia , tapestry cloth 1.5 mtr wide , back seat for chair tubular with arms , check nut 32mm , legs for table centre size 450x60x30mm , lock for drawer steel , mirror for table dressing gents made in teak wood 25 x 19mm overall size 790mm height x 410mm wide fixed at 150mm from top of lower base alongwith mirror 5.5mm thick. , touch wood , thinner , paint enamelled og , paint enamelled black , paint red oxide , ms screw wood 25mm , ms screw wood 35mm , ms screw wood 40mm , ms screw wood 20mm , stop valve brass 20mm external threading , stop cock brass 25mm internal threading , flexible wire copper twin core sheathed 40 or 0.076 , pvc copper cable single core 2.5 sqmm , pvc cable twin core 10 sqmm , led focus light 15 watt , pvc copper cable twin core 4 sqmm , prospot cob swival led light 15 watt , stop valve brass 20mm internal threading , stop cock brass 25mm external threading , galvanised mild steel wire cloth 0.56 nominal of wire and average width of aperture 1.18mm of size 1mtr x 15mtr roll best quality. , pvc copper 1.5 sqmm single core , heating element 1500 watt , decorative globe unbreakable poly carbonate material suitable for retrofit led lamp 3watt code no lhfxbonitn5q008 complete as per sample , pvc copper cable single core 4 sqmm , pvc cashing caping 25mm , pvc cashing caping 20mm , flexible wire copper twin core sheathed 23 oblique 0.076 , pvc copper cable single core 6 sqmm , db 8 way , decorative tipe led spot light 5w focus light 230v, 50hz , pvc armoured cable 3.5x120 sqmm , pvc armoured cable 3.5x50 sqmm , pvc copper cable twin core 1.5 sqmm , ht fuse element suitable for 11000 volts 5 amps capacity , ht fuse element suitable for 11000 volts 20 amps capacity , ht fuse element suitable for 11000 volts 10 amps capacity , cable jointing kit 3.5 corex95sqmm outdoor , distilled water 5 ltr container , m seal , cable straight through joint kit 3.5 core 95x52mm out door , hacksaw blade , nails wire steel 50mm , nails wire steel 25mm , nails wire steel 100mm , nails wire steel 40mm , nails wire steel 75mm , bleaching powde

Central Government And Public Sector

CTN :37942723

21 Nov, 2024 NA

Multi City - Multi State

Tender For heating element mould pre heat heating element of 2.9kw at 110v, the heating eleme nt shall be of kanthal-a1 material. the dimensional and other details shall be as per drg.no.rwf/e l/sk/wsc/he-2015-002 r-2 dt:31/03/2022. raw material test certificate for kanthal a1 to be submit ted at the time of supply. the certificate shall be from the laboratory accredited nabl. warranty: 06 ( six) months from the date of installation or 12 months from the date of supply against any manufactur ing defects. note: before making bulk supply one sample to be got approved by sse/el/wsc with the relevant certificate if the supplier is offering for the first time [ warranty period: 12 months after the date of delivery ]

Dryer Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector