Get complete information related to latest Duckfoot Bend Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Duckfoot Bend Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Duckfoot Bend Tenders.
Tender For canal crossing structure for distribution pipe line, construction of approach road at h/w site and guard wall to support approach road under jjm for augmentation of chirulia chatla zone-iv water supply scheme within egra-i block under digha sub-divn
Tender For carrying out various instrumentation works for part a as per standard specification by providing all required materials in connection with the composite works for setting up of hpg-2, butene-1 and psa units at lepetkata, assam of m/s bcpl-instrumentation"pressure gauges and accessories (excl. supply of impulse pipe / tubing materials)"installation of line mounted or remote mounted or local gauge board mounted pressure gauge/ pressure gauge with pulsation dampener / syphon / over-range protector (direct / surface mounted / diaphragm seal type) inclusive of mounting of instrument, supply and erection of supports / tray, mounting on support (if support required), laying of capillary on tray, fabrication and installation of manifolds / impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of supply of instrument, gauge board, yoke, piping material and calibration.in stainless steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-0432/1112in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1210in carbon steel as per standard 7-52-0433/1113in carbon steel as per standard 7-52-1120in carbon steel as per standard 7-52-0459/1158"pressure instruments (excl. supply impulse pipe / tubing materials)"installation of pressure transmitters/ pressure switches (with or without pulsation dampener, over-range protector)/ diaphragm seal type pressure transmitters/ diaphragm seal type pressure switches including mounting on yoke/ surface, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instrument, piping/tubing materials, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0437/0438/1131/1132in carbon steel as per standard 7-52-1222in carbon steel as per standard 7-52-1223in carbon steel as per standard 7-52-2103in stainless steel as per standard 7-52-1223in carbon steel as per standard 7-52-1143in stainless steel as per standard 7-52-1143"differential pressure instruments (excl. supply of impulse pipe/tubing materials)"installation of differential pressure transmitters (including one side capillary type)/ differential pressure switch(including one side capillary type)/ diaphragm seal type dp transmitters/ diaphragm seal type dp switch including mounting on yoke/ surface, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of supply of instrument, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard 7-52-0452/1171in carbon steel as per standard b348-7-52-4062in stainless steel as per standard b348-7-52-4062in carbon steel as per standard b348-7-52-4063"differential pressure (flow) transmitters (excl. supply of impulse pipe/tubing material)"installation of differential pressure(with or without integral manifold)/ diaphragm seal type differential pressure flow instruments including mounting on yoke, supply of supports for impulse lines/ manifolds/ capillary, fabrication and installation of manifolds/ impulse lines with supports as per standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of supply of instruments, piping material, all electrical/ pneumatic connections, yoke and calibration.in carbon steel as per standard b348-7-52-3339in carbon steel as per standard 7-52-1305in stainless steel as per
Tender For tender for supply of elongation - elongation (hw-602.16) -- fully m/cd as per drg.31201056160 rev.00 with matl. as per cbom 31201056160 rev.00 , elongation (l 205) (hw-602.17) -- fully m/cd as per drg.31201056170 rev.00 with matl. as per cbom 31201056170 rev.00 , plateform (hw-607.03) -- fully m/cd as per drg.21204258300 rev.01 with matl. as per cbom 21204258300 rev.00 , support (hw-607.07) -- fully m/cd as per drg.31204258700 rev.00 with matl. as per cbom 31204258700 rev.00 , profile (hw-607.08) -- fully m/cd as per drg.31204258800 rev.00 with matl. as per cbom 31204258800 var.00 rev.00 , profile (hw-607.09) -- fully m/cd as per drg.31204258090 rev.00 with matl. as per cbom 31204258090 rev.00 , square pipe (hw-607.27) -- fully m/cd as per drg.41204258270 rev.00 with matl. as per cbom 41204258270 rev.01 , grate (hw-607.46) -- fully m/cd as per drg.31204258046 rev.00 with matl. as per cbom 31204258046 rev.00 , grate (hw-607.47) -- fully m/cd as per drg. 31204258047 rev.00 with matl. as per cbom 31204258047 rev.00 , grate (hw-607.50) -- fully m/cd as per drg.31204258050 rev.00 with matl. as per cbom 31204258050 rev.00 , grate var.00 (hw-607.51) -- fully m/cd as per drg.31204258051 rev.00 with matl. as per cbom 31204258051 rev.00 , grate var.01 (hw-607.55) -- fully m/cd as per drg.31204258051 rev.00 with matl. as per cbom 31204258051 var.01 rev.00 , grate (hw-607.54) -- fully m/cd as per drg.31204258054 rev.00 with matl. as per cbom 31204258054 rev.00 , grate (hw-607.56) -- fully m/cd as per drg.31204258056 rev.00 with matl. as per cbom 31204258056 rev.00 , grate (hw-607.57) -- fully m/cd as per drg.31204258057 rev.00 with matl. as per cbom 31204258057 rev.00 , support var.01 (hw-617.02) -- fully m/cd as per drg.31122656010 rev.04 with matl. as per cbom 31122656010 var.01 rev.00 , support var.03 (hw-617.03) -- fully m/cd as per drg.31122656010 rev.04 with matl. as per cbom 31122656010 var.03 rev.00 , thread shield (hw-628.04) -- fully m/cd as per drg.41209856020 rev.00 with matl. as per cbom 41209856020 rev.00 , pin spanner (hw-634.03) -- fully m/cd as per drg.21202756020 rev.00 with matl. as per cbom 21202756020 rev.00 , pin spanner (hw-634.04) -- fully m/cd as per drg.21202756030 rev.00 with matl. as per cbom 21202756030 rev.01 , pin spanner (hw-634.05) -- fully m/cd as per drg.21202756040 rev.00 with matl. as per cbom 21202756040 rev.00 , pin spanner (hw-634.06) -- fully m/cd as per drg. 31202756050 rev.00 with matl. as per cbom 31202756050 rev.01 , wrench (hw-634.08) -- fully m/cd as per drg.11202756070 rev.01 with matl. as per cbom 11202756070 rev.00 , monkey wrench (hw-635.14) -- fully m/cd as per drg.31208756100 rev.00 with matl. as per cbom 31208756100 rev.00 , wrench (hw-635.18) -- fully m/cd as per drg.31208756360 rev.00 with matl. as per cbom 31208756360 rev.00 , pin spanner (hw-658.01) -- fully m/cd item as per drg. 31202730010 rev.00 with matl. as per cbom 31202730010 rev.00 , support var.04 (hw-617.04) -- item as per drg. 31122656010 rev.04 with matl. as per cbom 31122656010 var.04 rev.00
Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize
Tender For construction & commissioning of 200 mm dia tubewell by odex method support, providing, laying & jointing of pipe line for rwss banskho (bassi) under cm budget announcement 2024-25