Get complete information related to latest Dwc Pipe Laying Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Dwc Pipe Laying Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Dwc Pipe Laying Tenders.
Tender For shifting of feeder main with laying of 900 m.m dia m.s. carrier pipe and 1100 mm dia m.s. casing pipe near new bus stand railway under bridge at mathura
Tender For corrigendum : tender for supply of tree branch trimming along the ht overhead line pole erection and laying of lt cable in narwapahar - tree branch trimming along 6.6kv overhead lines within the plant & township boundary area of narwapahar , laying of one no. of pvc insulated & pvc sheathed / xlpe power cable of 1.1kv grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. upto 35sqmm. (16mm2 25 mm2 &35 mm2) , laying of one no. of pvc insulated & pvc sheathed / xlpe power cable of 1.1kv grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. above 95 mm2 & upto 185 mm2. (120 mm2.) , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 2 x 16 sqmm , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 3.5 x 25 sqmm , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 3.5 x 120 sqmm , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 3.5 x 35 sqmm , supply & erection of octagonal pole 9 mtrs long in cement concrete foundation including excavation and refilling and secured with holding clamps , bolts and nuts as required , supply & embeding following dia gi pipe 32mm dia (medium class) in pole collar / founding (during casing) for cable entry including beding in the pole to the required shape complete as required , installation of gi wire 8 swg for ground wire , installation of complete stay set incl. supply of necessary fixing materials , installation of gi wire 7/10 swg for stay set in existing o/h line , installation of insulating sleeves in ryb phases of o/h line
Tender For corrigendum : supply of supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , install, replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , install, replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels
Tender For supply of signage control unit tower server type poweredge. , streaming encoder with audio open standard avoip 4k , management work station , perpetual license , server bundle license minimum 50 user , professional display unit 43 inch , professional display unit 55 inch , 9u rack 600x500 , 24 port unloaded patch panel , cable manager , keystone jack , 1 mtr patch cord , cat6 cable box 305 meter , 12f mm armoured fiber om3 cable , 12 port loaded mm liu lc om3 , lc lc mm duplex patch cord om3 , sfp mm module lc duplex om3 , 6f sm armoured fiber , 6f loaded liu , lc lc sm duplex patch cord , sm duplex sfp lc module , pigtel for fibre termination , 24 port gigabit manageable switch with 4 sfp modules rack mount , 8 port gigabit manageable switch with 2 sfp modules rack mount , 4mm 3core power cable or wire , 25mm precision conduit pipe , 3 slot modular board , 40 amp 2 poll mcb , 2 poll mcb box , 1.5 inch casing patti , fiber termination work , termination of keystone jack, cable identification, cable bundling with cable tie, rack dressing and cable numbering with ferrul and crimping as per actual , trenching for laying cables per metre , rack installation , installation charge for cat6 cable, fiber cable, electric cable laying in conduit casing caping with required saddle box, 35x8 screw box, pvc rawal plug packet, wire tape and commissioning of system ) /bid number : gem/2026/b/7584227 * /dated: 27-05-2026 & & / bid document 1 / 31
Tender For sitc of vrv type ac - 14 hp air cooled outdoor condensing unit supply , 20 hp air cooled outdoor condensing unit supply , 24 hp air cooled outdoor condensing unit supply , 14 hp outdoor unit installation testing commissioning , 20 hp outdoor unit installation testing commissioning , 24 hp outdoor unit installation testing commissioning , 1.5 tr 4 way cassette indoor unit supply , 4 tr 4 way cassette indoor unit supply , 1.5 tr 4 way cassette indoor unit installation , 4 tr 4 way cassette indoor unit installation , 3 tr split dx cassette air conditioning system supply , 3 tr split dx ac system installation testing commissioning , centralized remote controller unit supply , centralized remote control unit installation testing commissioning , 25.4mm od copper refrigerant pipe supply , 22.2mm od copper refrigerant pipe supply , 19mm od copper refrigerant pipe supply , 15.86mm od copper refrigerant pipe supply , 12.7mm od copper refrigerant pipe supply , 9.5mm od copper refrigerant pipe supply , 25.4mm od copper pipe installation testing commissioning , 22.2mm od copper pipe installation testing commissioning , 19mm od copper pipe installation testing commissioning , 15.86mm od copper pipe installation testing commissioning , 12.7mm od copper pipe installation testing commissioning , 9.5mm od copper pipe installation testing commissioning , vrf refrigerant y and t joints with insulation supply , vrf refrigerant y and t joints installation testing commissioning , 3 core 2.5 sqmm cu shielded communication cable supply , 4 core 2.5 sqmm cu shielded communication cable supply , 2 core 1.5 sqmm cu shielded communication cable supply , 3 core 2.5 sqmm cu cable laying , 4 core 2.5 sqmm cu cable laying , 2 core 1.5 sqmm cu cable laying , pvc condensate drain pipe with insulation supply , pvc condensate drain pipe installation , ms table top stands for outdoor units supply , ms table top stands for outdoor units installation , refrigerant gas r410a supply and filling , 4 core 10 sqmm xlpe armoured copper cable supply , 4 core 16 sqmm xlpe armoured copper cable supply , 4 core 10 sqmm xlpe cable laying testing commissioning , 4 core 16 sqmm xlpe cable laying testing commissioning , aluminium anodized partition for ac enclosure , light point wiring in pvc casing and capping , 2x2 led luminaire 24w recess surface mounted supply , led panel 2x2 24w installation testing commissioning , 4c 50 sqmm xlpe armoured copper cable supply , gi wire 8 swg supply and delivery , armoured cable laying on wall for ac power db , 4c 50 sqmm cable end termination both ends , tpn distribution board 8 way hvac odu , fp isolator 125 amp sitc , fp mcb 63 amp sitc , fp mcb 40 amp sitc , sp and n distribution board 12 way hvac idu , dp mcb 32 amp sitc , sp mcb 6 or 10 amp sitc , sfu 100a tpn at main switch board sitc , chemical earth electrode earthing arrangement sitc , camc first year air conditioning system , camc second year air conditioning system , camc third year air conditioning system , camc fourth year air conditioning system , camc fifth year air conditioning system
Tender For mla-sdf- kothamangalam lac- 2025-26- setting up of open gym equipments at ward 15, kothamangalam municipality, ernakulam district - construction of open gym, 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more, 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete, 16.83:taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge., od289920/2025-2026:walker single- providing and fixing walker single fnf 004- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe- for leg frame, minimum 25 nb gi c-class pipe for handle frame, nylon 66 injection moulded casing clamps, lldp root molded seat with inbuilt bolts 3/8" x 1.5" foot rest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289924/2025-2026:rider- providing and fixing fun rider (fnf 002)- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe for seat frame, minimum 40 nb & 25 nb c class gi c-class pipe for handle frame, minimum 32nb & 25nb gi c-class pipe with two handles for leg rest, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest & seat rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat., od289921/2025-2026:ski trainer- providing and fixing ski trainer- fnf 014- minimum 100 nb g.i. c class pipes for main frame, minimum 40 nb g.i. pipe for foot rest pipe, minimum 40nb & 25 nb g.i. pipe for handle, minimum 25 nb & 40 nb gi c-class pipe for connecting pipe, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289922/2025-2026:abb trainer- providing and fixing abb trainer - fpspcl187- minimum 80 nb gi c- class pipe for main frame, minimum 32 nb gi c-class pipe for side frame, minimum 25 nb g.i. pipe for intermediate pipe, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat ., od289923/2025-2026:cycle- providing and fixing cycle - fpspcl208 - 25 nb & 40 nb gi c-class pipe for main frame, 32 nb gi c-class pipe for seat frame, 25 nb