Latest edge switch Tenders | Government edge switch Tenders

Central Government/Public Sector

CTN :39600802

31 Mar, 2025 NA

Bengaluru - Karnataka

Tender For supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial knife sterilize

Central Government/Public Sector

CTN :39601378

13 Mar, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For krohne make flow meter and switch for hp lp vacuum pump of 2 x 800mwntpc lara project

Central Government/Public Sector

CTN :37395179

10 Mar, 2025 NA

Raigarh - Chhattisgarh

Tender For bid to ras bid to ras corrigendum : supply of condenser air evacuation package for lara project - w96716155937 drg 31611770113 rev 00 condenser air evacuation package vacuum pump spec he57016 rev 04 itemid bh010 lara1 , w96716155937 drg 31611770113 rev 00 condenser air evacuation package vacuum pump spec he57016 rev 04 itemid bh010 lara2 , w96716155317 drg rev 00 complete vacuum pump bare shaft vacuum pump spec he57016 rev 04 lara spare , w96716155325 main motor for vacuum pump spec he57016 rev 04 , w96716155465 heat exchanger for vacuum pump package spec he57016 rev 04 lara spare , w97716155580 impeller and shaft assembly complete suitable for 30 scfm vacuum pump spec he57016 rev 04 size suitable for origanal supply lara spare , w97716155253 coupling complete for vacuum pump of 30 scfm spec he57016 rev 04 size to suit the main supply lara spare , w97716155059 bearing for vacuum pump 30 scfm 1set equals 2 nos spec he57016 rev 04 size to suit original supply lara spare , w96716155589 complete set of gaskets o rings for heat exchanger spec he57016 rev 04 lara spare , w97716152050 complete set of mechanical sealing assembly deand nde gland packing assembly as applicable of one vacuum pump spec he57016 rev 04 lara spare , w97716155431 seal water recirculaton pump asembly along with motor 30 scfm vp spec he57016 rev 04 lara spare , w97716155822 pressure transmitter for vacuum pump system 0 to 1 bar abs spec he57016 rev 04 lara spare , w96716155813 level transmitter for vacuum pump spec he57016 rev 04 lara spare , w96716155210 drg 31611770047 rev 00 differential pressure switch for vacuum pump spec he57016 rev 04 lara spare , w96716155490 flow indicator cum switch for vacuum pump spec he57016 rev 04 lara spare , w96716155180 drg 31611770044 rev 00 temperature switch for vacuum pump spec he57016 rev 04 lara spare , w97716155547 level gauge for vacuum pump separator tank spec he57016 rev 04 size to suit original supply lara spare , w97716155733 drg to suit original supply rev 00 pressure gauge 0 to 1 bar lara spare , w97716155741 drg to suit original supply rev 00 pressure gauge service water lara spare , w97716155466 temperature gauge 0 to 100 deg c for vacuum pump heat exchanger size 0 to 100 deg c lara spare , w96716155457 differential pressure gauge for vacuum pump package duplex filter spec he57016 rev 04 lara spare , w97716155849 drg to suit original supply rev 00 air flow meter rotameter for vacuum pump system spec he57016 rev 04 lara spare , w96716155244 drg 31611770051 rev 00 temperature transmitter for vacuum pump spec he57016 rev 04 lara spare , w97716152033 temperature element for vacuum pump spec he57016 rev 04 lara spare , w97716152041 thermowell for temperature element spec he57016 rev 04 lara spare , e and c charges lump sum per man day charges at site including every expense at our site boarding and lodging, local travel etc , e and c charges lump sum per visit charges to and fro including travelling time and all expenses up to our project site bid details/ 2 / 30

Central Government/Public Sector

CTN :39418986

13 Mar, 2025 13.07 Lacs

Korba - Chhattisgarh

Tender For corrigendum : supply of spares for jyoti make 33kv circuit breaker - rectifier unit, part no. - j9574194 , spring chargingmotor, part no. - 3vc40001007 , thermal overloadrelay, part no. - 4vc680319 , lower pole assemblycomplete with all in, part no. - j71715099 , upper poleassembly complete with all in, part no. - j71715199 ,vacuum interrupter, part no. - 3vc200014 , contactmultiplication relay for 110dc, part no. - j9574187 ,ac-dc control fuse - breaker side, part no. - j9574185, breaker control switch 1 pole trip - neu, part no. -j9574183 , anti pumping relay, part no. - j479653 , h. t.connector set p.t. side, part no. - j94736722 , h. t.connector set breaker side - incom, part no. - j94736731 , closing coil assembly, part no. - 4vc49110, h. t. connector set c.t. side, part no. - j94736721 ,timer aux supply 220 v dc, part no. - j9574215 ,tripping coil assembly, part no. - 4vc590189 ,insulating stud assembly, part no. - 3vc690073 ,winding temperature relay, part no. - j479751 , master triprelay, part no. - j479744 , idmt relay for 3 o-c and 1e-fbroken cndctr, part no. - j573694 , oil temperaturerelay, part no. - j479477 , control cable connectioncomplete set , part no. - j94735371 , breaker controlswitch, part no. - j579721 , panel space heater, part no. -j479654 , thermostat setting 30-80 c, part no. - j479656

Central Government/Public Sector

CTN :39607694

27 Mar, 2025 NA

Morbi - Gujarat

Tender For instruments - adapter for ultrasound digital fetal doppler, 1 no., 4, adult colonoscope, 1 no., 8, aluminum walker adjustable, 1 no., 12, artery forcep 6" curved, 1 no., 16, autoclave vertical: model : ac123 , lab tech -should be fully automatic vertical autoclave for total destruction of all living microorganisms-pressure adjustable from 10psi to 20psi with an accuracy of +/- 1 to 3 psi, with automatic pressure control switch-outer and inner chamber made up of stainless steel-size of the inner chamber:- 50 x 75 cm (diameter x depth)-should be providing 2 carriers of stainless steel. size of the carriers should be 35-40 x 30-35 cm ( x d)-should be provided with silicon/ rubber/ neoprene gasket-lid should be stainless steel and should be fitted with pressure gauge safety valve manual exhaust valve vacuum breaker ports of calibration check-all the hinges should be of stainless steel-should be provided with stainless steel heated cover stand-drain valve at bottom for draining the water-electrically heated-micro processor controller based system to provide digital display of cycle processes like temperature, pressure-should be provided with low water level alarm and cut off-automatic pressure control switch- to cut off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level-should be fixed with chart and data recorder-iso/ ce marked -should provide test certificates, calibration certificate and traceability certificates for temperature and pressure gauges-the downtime of the equipment must not be more than 10 days annually and system must be made functional within 48 hours of breakdown and in case of such incident the period of breakdown will not be counted while calculating warranty or cmc period. if the downtime during any year is more than 10 days a penalty at the rate of 0.1percent of the cost of the equipment will be levied for each extra day of downtime.-operation manual with user demonstration video cd (with sop in guajarati), 1 no., 20, b.p. instrument digital, 1 no., 24, binocular microscope, 1 no., 28, bolster size large, 1 no., 32, bp instrument (mercury), 1 no., 36, c p chair (wooden + metal), 1 no., 40, centrifuge machine, 24 tube digital display & 5000 rpm, 1 no., 44, chital forcep 10", 1 no., 48, cold light source cable, 1 no.

Central Government/Public Sector

CTN :39619330

26 Mar, 2025 NA

Mysore - Karnataka

Tender For supply of industrial vacuum cleaner for cleaning electrical panels and switch board cabinet with followi ng specifications, 1. input power - 1200 w 2. vacuum pressure - 254 mbar 3. container volume - 35 ltrs ma ke bosch or similar [ warranty period: 12 months after the date of delivery ]

Central Government And Public Sector

CTN :39403141

12 Mar, 2025 NA

Angul - Odisha

Tender For corrigendum : tender for supply of siemens make vcb spares - vacuum interrupter vs 15102 vcb , spring charging motor type um 4 m , tripping coil type 3ay 1510 220v dc , limit snap switch for vcb , limit snap switch block for vcb , off block for siemens make vcb , 32pin control plug 6 6kv siemens braker , 64 pin plug assembly for vcb , drive box for siemens6 6kv vcb 1600a , gear box assy for vacuum ckt breaker , pp tube for siemens make vcb 6 6kv , nylon bolt for siemens make vcb 6 6kv , pp tube bush for siemens vcb 1600a , door handle for vcb panel , aux switch s1 siemens m k vcb 6 6kv , auxiliary switch s16 vcb 6 6kv , double bit key , shock absorber for siemens breaker

Central Government/Public Sector

CTN :39554792

14 Mar, 2025 4.26 Lacs

Betul - Madhya Pradesh

Tender For tender for supply of crompton greaves cg make 33kv vcb spares - motor , tripping coil , trip catch , closing shaft , anti pumping device 24v dc , tnc switch with bell alarm contact , vacuum interrupter

Central Government / Public Sector

CTN :39446035

11 Mar, 2025 NA

Faridabad - Haryana

Tender For corrigendum : supply of isolating contact 3 pair finger type , g 4 vacuum interrupter , nylon breaker wheel , interlock handle dia 6 mm hex operating handle dia 6 mm guide bush , charging pawl , motor cut off switch lever mechanism spare , on and off indictator assembly with spring mechanism spare , motor cut off switch , secondary plug and socket 24 nos of pins , spring charging motor , busbar support insulator , closing spring guide rod , opening spring guide rod , pin for spring guide rod , spring charge indicator assembly , push to trip knob , push to close knob , override stop and gasket , override stop pin , limit switches for motor cutoff , buffer washer for opening springs , buffer washer for closing springs , racking screw , num directional ocandef relay micom p127 , protection relay micom p123 , p122 relay for transformer feeder , tripping coils 110v dc , closing coils 110v dc , relay num. feedr gnrtr prot micom p111 aux supply suitable for 110v and 220v both ac and dc , hwx rating 12 kv 630 amp , flexible connector 800a vg464mm length

State Government

CTN :39546528

10 Mar, 2025 NA

Jabalpur - Madhya Pradesh

Tender For sanitary items, motor and pump and green net for nusery. - motor and pump items, 7.5 hp submersible pump (kirlosker, crompton, cri or equivalent (isi marked), 7.5 hp starter (isi marked)with current and voltage meters, 5 hp submersible pump (kirlosker, crompton, cri or equivalent (isi marked), 5 hp open well monoblock pump 2.5"x2", ac motor, 3 phase, 2900rpm, 9-10 (kirlosker, crompton, cri or equivalent (isi marked), 5 hp starter (isi marked)with current and voltage meters, ci gate valve 65 mm (isi marked), ci non return valve 65 mm (isi marked), gi band 65 mm (isi marked), gi union 65 mm (isi marked), gi 6 meter pipe 2.5" (isi marked), electric 3 phase main switch - 63 amp anchor/havells (isi marked), premium quality (isi marked) strong build electric panel for pump house metal 4x8 feet ready for electric componets fitting, armored cable 4.0c 25mm isi (4 core) aluminium wire (model-kia/anchor/ polycab/ havells /rr), green net house items, green shade net 75% shade 3m x 50m, profile lock with zigzag spring, uv sheet standard quality 200 micron (isi marked), sanitary & hardware items, damp proof asian/nerolac/indigo, garden pipe (hose pipe satak) - 3/4" isi marked, hdpe black roll coil pipe 2" (isi marked), plywood 18 mm, 8x4,century,greenply isi marked, plywood 30 mm, 8x4,century,greenply isi marked, plywood 9 mm, 8x4,century,greenply isi marked, rcc hume pipe (np3) 300mm, termite proof solution, one pc sute sanatiary commode (model- cera/johnson/hindware/sumani), misc. items, office chair ornate lacquered finish black colour with red cusion, office chair - revolving - orthopedic- premium quality -adjustible seat - cushioned seat and arm-rests, flex star quality black back, banner flex star quality, irrigation material, pvc irrigation pipe is -4985 75mm, working pressure 4kg/cm2 6m, pvc irrigation pipe is -4985 63mm, working pressure 4kg/cm2 6m, tube od 16 mm cl2 linear low density polyethylene (lldpe) -is-3395, mini sprinkler mi spr red 85 lt 1.20 m rod ass smst 8mm extention tube 1.2 m with assembly, poly grommet take off 16 mm x 13mm (material - high quality plastic or rubber ), j- turbo aqur /line joiner 16mm, working pressure 1kg/cm2 (material - high quality plastic or pvc ), lateral end stop "8" shape for 16 mm tube (material- pvc), mini valve 16mm x 16mm, (material- hdpe), barbed poly tee 16 mm diameter (material- pvc/hdpe), barbed elbow 16 mm diameter (material- pvc/hdpe), double acting air/ vacuum release valve for 1" connection size (material- pvc/hdpe), flush valve 63mm outer diameter, working pressure 6kg/cm2 (material- pvc/hdpe), control valve, size 63mm outer dia., molded seal plain, double union (material- pvc/hdpe) pn10, pvc non return valve, size 75mm dia., plain, double union (material- pvc/hdpe) pn 10, elbow (euqal) 63 mm hd 10 kg, dis/sis elbow (euqal) 75 mm hd 10 kg, tee (equal) 63 mm- hd 10 kg, tee (equal) 75 mm- hd 10 kg, male thread adapter 63 mm (11/2) - hd 10 kg, dis/sis j- ghoomer 5o m3/hr90 mm w ss clamp pn-10, dis/sis j- s flow 4o m3/75 mm discln pn-10, fm thread adapter 63mm (11/2) hd 10 kg, teeflon tape, perma fix 1 l - ti

Edge Switch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors