Latest elastic rail clip Tenders | Government elastic rail clip Tenders

Central Government/Public Sector

CTN :38884100

07 Apr, 2025 NA

Multi City - Multi State

Tender For fabrication and supply of 7000 mm or switches [curved] for 1 in 8.5 diamond crossing with double slip bg for 52 kg. rails [uic] on psc sleepers layout to rdso drg. no. t- 5364/ latest alteration & spn, irs/t-10-2000 for fabricated switches corrigendum no 01 of dec 2016 (complete with all parts listed in the sub assembly drawings but excluding standard fish plate, fish bolts, elastic rail clips and insulating liners/metal liners) as amended upto date of closing of tender..note:: latest alteration/ corrigendum wherever used will mean the alterations/ corrigendum up to the actual date of closing tender for which no additional payment shall be made

Central Government And Public Sector

CTN :39662308

11 Apr, 2025 NA

Bengaluru - Karnataka

Tender For carriage of light melting scrap(lms) consisting of wagon body (in dismantled/cut conditions), wagon cbc components without rubber (for example couplers and draft gears without pads), wagon bogies (in dismantled condition), wagon end buffers, yoke, knuckles, springs (including springs used in casnub bogies), ms angles, tie bars, erc (elastic rail clips), ms panel sheet & wagon door, ms sheet, scrap ms melting, ms adopter wide jaw and narrow jaw, ms cub spacer, ms shearing plate, bogie frame bolster, ms plate, ms ingot and others; from various railway units in india to rail wheel factory, yelahanka, bengaluru - 560064; under the distance slab of above 1000kms (with a mean distance of 2500kms), by road.quantity:4000mt. note: the work involves other intermediary and ancillary activities such as: (1)collection of lms (2) loading the lms into the vehicle. the contractor shall load only those lms items which are free from rubber components (3)unloading at destination, by railways at free of cost.special note: mandatory documents should be submitted in compliance of bid security, annexure-v, annexure-v(a), annexure-vi(b), power of attorney and iba certification. non-submission of necessary documents in support of the above shall result in summarily rejection of bids.

Central Government And Public Sector

CTN :39663520

11 Apr, 2025 NA

Raipur - Chhattisgarh

Tender For supply of elastic rail clip mk. iii with flat toe 60 kg uic/52 kg rail sections to drg. no. rdso t-370 1 with specification conforming to irs-t-31-2021 with latest amendment, if any, with alt no. 7 with lat est alterations, if any, [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :39663679

19 Mar, 2025 NA

Bilaspur - Chhattisgarh

Tender For manufacture and supply of elastic rail clip mk-v conforming to rdso drg. no. t-5919, with latest alterations. specification: indian railway standard specification for elastic rail clips (fifth r evision) with corrigendum no. 2 with latest alterations. the term "latest alterations" wherever used wil l mean the alterations up to the actual date of opening of tender. [ warranty period: 30 months afte r the date of delivery ]

Central Government/Public Sector

CTN :39687865

15 Apr, 2025 NA

Erode - Tamil Nadu

Tender For supply of grease no.'o' graphited for elastic rail clips ( spec. no is 408-1981/ reaffirmed 2004. with rdso additional requirement as slip no.1 issued by rdso on august 2016) specn: spec. no is 4 08-1981/ reaffirmed 2004.with rdso additional requirement as slip no.1 issued by rdso o [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :39688310

15 Apr, 2025 NA

Firozpur - Punjab

Tender For manufacture & supply of elastic rail clip mark-v with flat toe 60kg uic/52 kg rail sections to rdso drg. no. t-5919 with latest alt erations & specifications conforming to irs-t-31 with latest amendments. (the alterations in drawing and specification issued by rdso one mo nth prior to tender closing date shall be applicable.) [ warranty period: 30 months after the date of delivery ]

CTN :39669178

26 Mar, 2025 NA

Medak-T - Telangana

Tender For supply of beam supporting to drawing no: 765-17-cd236

Central Government/Public Sector

CTN :39297776

20 Mar, 2025 NA

Raebareli - Uttar Pradesh

Tender For corrigendum : tender for supply of elastic rail clip mk v type for ntpc stations - as per item specification , as per item specification , as per item specification , as per item specification , as per item specification

State Government

CTN :39631073

28 Mar, 2025 1.79 Crore

Junagadh - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka una under taluka panchayat,una under mgnrega (annual unit rate), dist. gir somnath - providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (a) foundationsfootings bases of columns etc. and mass concrete., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (b) flat surfacessuch as soffits of supspened floors slabs landings andthe like. (1) floors etc. upto 200 mm in thickness., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (g) columnspillarsposts and struts. (1) square rectangular polygonalin plan., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (h) (1) sides andsoffits of beams beam haunchings cantilevers girdersbressumers and lintels not exceeding 1 m. in depth., providing formwork of ordinary timber planking so as togive a rough finish including centering shutteringstrutting and propping etc. height of propping andcentering below supporting floor to ceiling not exceeding4 m. and removal of the same for in situ reinforcedconcrete and plain concrete work in. (c) vertical surfacesuch as walls (any thickness) partitions and the likeincluding attached buttresses & string course & the like., providing and fixing 35 mm thick shutters for doors,windows and clear story windows including anodisedalluminium butt hinges with necessary screws. (a) indianteak wood (ii) fully glazed., steel hysd, battens 75 mm x 100 mm, binding wires, c.i. cover with frame 300mm x 300mm, c.i. cover with frame 455mm x 610mm, c.i. cover with frame 500mm x 700mm, c.i. cover with frame 600mm x 850mm, cement (53 grade), coarse sand, coarse sand 5.0 k.m., coarse sand 5 to 10 k.m., coarse sand 10 to 15 k.m., coarse sand 15 to 25 k.m., coarse sand 25 to 50 k.m., coarse sand 50 to 100 k.m., common burnt clay bricks modular size 20x10x10 cm -, common burnt clay bricks modular size 20x10x10 cm - 5.0 k.m., 5 to 10 k.m., 10 to 15 k.m., 15 to 25 k.m., 25 to 50 k.m., 50 to 100 k.m., corrugated a.c. sheet 6 mm thick, crushed stone aggregate for hard quality 6 to 10mm size -, crushed stone aggregate for hard quality 6 to 10mm size - 5.0 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 5 to 10 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 10 to 15 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 15 to 25 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 25 to 50 k.m., crushed stone aggregate for hard quality 6 to 10mm size - 50 to 100 k.m., crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10 to 20mm size 5.0 k.m., crushed stone aggregate for hard quality 10 to 20mm size 5 to 10 k.m., crushed stone aggregate for hard quality 10 to 20mm size 10 to 15 k.m., crushed stone aggregate for hard quality 10 to 20mm size 15 to 25 k.m., crushed stone aggregate for hard quality 10 to 20mm size 25 to 50 k.m., crushed stone aggregate for hard quality 10 to 20mm size 50 to

Central Government/Public Sector

CTN :39632120

02 Apr, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For manufacture and supply of elastic rail clip- mk v(erc mk-v) with flat toe for 60kg uic/52kg rail section to rdso drg no.t-5919 (alt-2) and with latest alteration upto date of tender notice, and conforming to irs t-31-2021(fifth revision) with corrigendum no.2 and latest alteration as amended upto date of tender noti ce. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Elastic Rail Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors