Latest elastic railclip Tenders | Government elastic railclip Tenders

Central Government And Public Sector

CTN :39848457

09 Apr, 2025 NA

Dibrugarh - Assam

Tender For supply of security plate for center pivot arrangement as per fiat drg. no. 1268843,ver-00 or latest. material conforming to austenitic steel grade iss304 with surface finish to 2d/2b.

CTN :39860315

14 Apr, 2025 NA

Kharagpur - West Bengal

Tender For supply of center pivot vertical liner for boxns wagon, as per rdso's drg no. wd-13012- s/05, alt. no. 3, item no.-4, mat. & spec.:- as per drawing. [ warranty period: 30 months after the date of deliv ery ]

CTN :39829320

09 Apr, 2025 10.60 Lacs

Bhiwandi - Maharashtra

Tender For provding and supplying furniture for b.g.p hospital urban health center in ward office no 05 bhiwandi - provding and supplying furniture for b.g.p hospital urban health center in ward office no 05 bhiwandi, item no. 1 :- providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with bwp type exterior grade phenol formaldehyde synthetic resin conforming to is 129231990, laminated on both sides,nova teak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. 1268/39.73, item no. 2 :- providing and fixing partitions made up of cctw frame of size 75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial ply and 4mm thick veneer on both sides with french polish etc. complete 1264/39.69, item no.3 :- providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm c/c and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade weight of gate 35 kilogram/smt. 1525/44.10, add 5% corporation charges, add 18 gst, item no. 1 :-providing and supplying if examinition table of size 1850 x 600 and 750 mm including foam of thickness 100mm thick for patient check up including all taxes labour charges and as per authority incharge ra, item no. 2 :- providing and fixing acrylic name board of size 8.23 x 1.22 m and 10 mm thick including main hospital name in acrylic of size 20 cm height and muncipal corporation logo including all taxes labour charges and as per authority incharge ra, item no.3 providing and supplying nylon rope safety net of 25mm x 25mm size honey comb designe including all taxes labour charges and as per authority incharge ra

CTN :39533938

04 Apr, 2025 NA

Multi City - Multi State

Tender For corrigendum : supply of set consisting of double acting hydraulic lifting system with high pressure ho ses compatible with pes make hydraulic power pack. model no. j-210/b having proper fitment alongwith the pivot pressing arrangement for the center pivot, pivot housing & elastic rin g fitment/ removing arrangement of electric locomotive wag9hc/wap7. each set consisting of the following with the details as mentioned below: (1) double acting lifting system mod el pes 30300 or equivalent having type - hollow ram with dia 33 mm center hole, capacity/str oke - 30 ton/275+/-25mm, working pressure - 700 bar, close height - 425+/-5mm, body/ram - +/-5 mm - 120/70 mm. .(2) polymide wire braided flexible hoses with 3/8 bsp or npt end fitting suita ble with jack & working pressure 700 bar having length= 03 mtrs..drawing no. ms23el0498 e nclosed. ]

corporations/Associations/Others

CTN :39816463

15 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For tender for supply of malleable spare and sheet metal components - nut (frt and middle pro shaft)(for transmission- 1515/55 bs-iv) , nut propeller shaft (for transmission- tata 1512/55 , 1618/62 bs-iii and 1618/62 bs-iv) , clutch release yoke(for clutch - tata1515/55 bs-iv) , ball pin (adjuster type) bs3/4/6 (for clutch- tata 1618/62 , 1515/55 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bs-vi) , set screw (for clutch- tata1515/55 bs-iv) , locking wire (for clutch- tata 1618/62 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bd-vi) , spring collar bracket (for front spring- tata 1512/55 bs-iii and 1515/55 bs-iv) , bracket , front spring hanger fr-lh and rr-rh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , bracket , front spring hanger fr- rh and rr-lh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , assy. fuel tank cap complete (for tata ultra 7.5t mini bus bs-iii and bs-iv) , center bearing bracket 192 mm pitch (for transmission- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket , front frd (rubber bush) (for front /rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy rear shackle with rubber bush (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , threaded bush (rubber bush) (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for rubber bush) bs-3/4/6 (rear suspension for tata ultra 7.5t mini bus bsiii and bs iv) , spring pin (for rubber bush) (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. rubber bush (svil-dia 22)(for rear suspension for tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. radiator cap (for tata 1515/55 bs-iv) , ball pin fixed pivot (for clutch booster ley. vk2011.4tgr and tf2012.otgr bs-vi/obd-ii bs-vi) , bracket-front spring wev front - front lh (front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring weveller rh(front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear rh (for front spring le vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear lh vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , cb bracket spl55 (for propeller shaft ley. mini ls1508.7t6r bs-vi) , cap. fuel tank (hcv) (for diesel tank cap- eicher 3008 mini bus bs-iii and bs-iv) , pin (for rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , pin sup.(for front suspension- eicher 3008 mini bus bs-iii and bs-iv) , bush , suspension mcv (for fr and rr suspension- eicher 3008 mini bus bs-iii and bs-iv) , shackle assy , spring (for front/rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , spherical bush dia-10 (for gear shift lever- eicher 3008 mini bus bs-iii and bs-iv) , center bearing bracket (for transmission- eicher 3008 mini bus bs-iv bus bs-iii and bs-iv)

Central Government/Public Sector

CTN :39817536

03 Apr, 2025 NA

Multi City - Multi State

Tender For supply of washer for center pivot pin / casnub bogie. drawing - rdso drg. no.- wd-85079-s-2, item-4, alt - 27. mat. spec. [ warranty period: 30 month s after the date of delivery ]

Central Government/Public Sector

CTN :39628934

21 Apr, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of stopper top for center pivot block for wag-7 loco as per rdso drg no. sk.vl-128 alt-6 (ref. no.5) or latest. [ warranty period: 30 months after the date of delivery ]

CTN :39342632

15 Apr, 2025 4.67 Crore

Amravati - Maharashtra

Tender For corrigendum : selection of system integrator for supply, establishment, operation and maintenance of center of excellence on digitalization through simulation at government college of engineering ,amravati - hardware part, battery charge and discharge test system, data acquisition and logging system, thermocouple/ rtd for temperature measurement, battery tester for internal resistance testing, electric vehicle bldc motor training system, bldc (brushless) inner rotor brushless dc motor coupled with dc shunt motor to study the load characteristics and study of drive parameters, battery characteristics training system, pmdc motor training system, power and transmission system study models for ev application, pmsm motor coupled with dc generator test bench setup, switched reluctance motor coupled with eddy current dynamometer test bench setup, pwm charge controller training system:, sectioned electric vehicle two-wheeler chassis, sectioned electric vehicle four-wheeler chassis, battery resistance spot welding machine, dc /ac clamp meter, non-contact type tacho meter, computing workstations for ev design and simulation, multi-body dynamics analysis research software bundle for ev (10 user), power train/ gearbox design research software package, 1d+3d thermal modelling, bms modelling, electric motor, ic engine modelling research software package, multi-physics cae research software package with battery modelling and analysis capabilities, nmc cell ( size 18650), nmc cell ( size 26650), lfp cell, smart bms training system, electric vehicle scanner, diy kits for 20 students, advanced driver assisting system (adas) training system for e-mobility, ac ev charger 10kw, dc fast charger: 20kw, multifunction installation tester, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, digital infrared thermometer, digital multifunction meter with vfd, ef-detection & 3-phase rotation, vde approved insulated tool set for ev, electric vehicle safety equipment, ev battery assembly & testing centre setup, ev battery pack cell equalizer, regenerative charging and braking training system, ev assembly disassembly kit, three phase power clamp-on meter with harmonics measurement, digital insulation multi function meter, phase sequence indicator, battery quality anaylyzer with data logger, laptop, hybrid display module, hybrid trainer module motorized, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, computing workstations / pc, engineering simulation software multi-physics cae research software (includes pre-processor and post processor) 10 users, 3d cad package ( 60 user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, video conferencing set-up, electromagnetic (em) simulation with circuit design, rf circuits and system design (5g) academic research software :, integrated circuit (ic) design & verification academic research software :, soc development board with software, emc/emi test equipment, spectro radiometer for measurement of the luminous flux, spectrum, color, and color rendering indices of single leds (hand held device), high end computers, 3d printer for prototyping, laptop, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, revolving chair with arm centre pivot mechanism, computer table, white board with stand, revolving office chair with arm centre pivot mechanism for faculty, laboratory wooden table, office table for faculty, major almirah with glass type doors, seminar chairs with desklet, executive office table, executive office chair, sofa set (3+2+1 seater), teapoy/coffee table, visitors chairs with cushion, major almirah, multi function/ all in one printer for office and lab, necessary electrification and networking, matting area with labour work (in sq ft), false ceiling (in sq ft), window sliding door, window curtains with fitting, gypsum plaster with wall putty, wall colori

CTN :39376026

15 Apr, 2025 2.95 Crore

Yavatmal - Maharashtra

Tender For corrigendum : selection of system integrator for supply, establishment, operation and maintenance of center of excellence on digitalization through simulation at government college of engineering ,yavatmal - hardware part, computing workstations / pc, desktop computers / workstations, engineering simulation softwaremulti-physics cae researchsoftware (includes pre-processor and post processor) 10 users, 3d cad package (30 user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, video conferencing set-up, ups 10 kva 3 phase (60 minute power back-up), computing workstations / pc, desktop computers / workstations, 3d printers (type 1), 3d printer (type 3)-w, 3d printer (dlp printer), sla printer, raw material requirements for 3d/sla/dlp printer (required for training programmes, upkeep of 3d printers, etc. for entire project duration) for one year, 3 d scanner for product testing and cad model generation, cam software (5user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, ups 10 kva 3 phase (60 minute power back-up), professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, revolving chair with arm centre pivot mechanism, computer table, white board with stand, revolving office chair with arm centre pivot mechanism for faculty, laboratory wooden table, office table for faculty, major almirah with glasstype doors, seminar chairs withdesklet, executive office table, executive office chair, sofa set (3+2+1 seater), teapoy/coffee table, visitors chairs with cushion, major almirah, multi function/ all in one printer for office and lab, necessary electrification and networking, matting area with labour work (in sq ft), false ceiling (in sq ft), window sliding door, window curtains with fitting, gypsum plaster with wall putty, wall coloring, air conditioner (2 tonne), interactive board, patitions & cubicles ( in sq ft), training support part, centre incharge (annual cost), lab operator (annual cost) write lab name here, faculty training write lab name here, lab operator (annual cost) write lab name here, faculty training write lab name here

Central Government/Public Sector

CTN :39788977

21 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For supply of cast steel bolster with integrated 14'' center pivot bottom for lwlh25 bogie. as per drawing no.wd-13012-s/05(sheet 1of 2)alt-04 spec [ wa rranty period: 30 months after the date of delivery ]

Elastic Railclip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector