Get complete information related to latest Electric Post Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electric Post Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electric Post Tenders.
Tender For corrigendum : purchasing of materials (rcc poles) used in forestry work - rcc pole type - straightlength - 2.00 mdimensions - bottom 10x10 cm square, top 8x8 cm squarecement concrete mix cement, sand and metal ratio 12:4, with 12.5 nominal size coarse aggregate sand used should be free from elay and salt concrete mix shall be conforming to grade m-15 of is-456:2000reinforcement - round vertical bars of 6 mm diameter, 11 no of stirrups of 6 nun drameter round ms bars 20 em centre to cenire.hooks 5 na, bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 1125 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing - in order to ensure desired compressive arenih. rcc fencing poles should be compacted with the help of platform vilaators surface should be uniform and free from voids. the concrete cover aver the reinforcement should not be less than 1.5 cm.
Tender For formatation of graval road from a)existing chenu gattu cc road to christian burial ground& rcc cover slabs at b) pole number 7/8 to dno 5-2-5at at gullavaripeta 27thward- under mpl general funds
Tender For corrigendum : state plan 2024 2025 rehabitation of existing 100mm sewer main from electricpost number pj pj 50 9 3 to jagathy post office naer dpi junction under sewerage section no ii kuriathy sewerage work
Tender For corrigendum : providing and fixing electrical material including led lights and wiring in nagar parishad anupgarh area. - electrical work, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .led street light fixture with minimum lumen output 5600 lm, led street light fixture with minimum lumen output 7500 lm, led street light fixture with minimum lumen output 12500 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr10.0 sq. mm2 core, supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsrdead end clamp with eye hook & pole clamp, providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .40 mm dia., supply and fixing of lt porcelain shackle insulator as per is:1443 1979 and as per discoms standard specifications, suitable for working voltage 1100 volts including all accessories like gi hardware fittings confirming to is:7935/1975 (latest amended) nut, bolt etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr100mm x 110mm, supply & drawing wiring for sub mains isi marked (is:694) 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped etc. as required. for additional technical parameters of product / work refer annexure a attached with this
Tender For supply of street light materials in hulical town panchayat - street light materials, 40 w tube light, 40 w tube light starter, 40 w copper choke, 40 w electronic choke, tube light side holder, 40w tubular fluoresent super brigth lamp, 40w ballast for fluoresent lamp, 40w planet electronic ballase heavy duty, 1 x 40 w street light fitting cover (cylinder), 1 x 40 w street light fitting cover (square), 1 x 40 w street light fitting, 1 x 40 w street light fitting pipe, 1 x 40 w street light fitting clamp, 1 x 40 w street light fitting side holder, 20w led street light fitting set, 25w led street light fitting set, 30w led street light fitting set, 36w led street light fitting set, 45w led street light fitting set, 50w led street light fitting set, 60w led street light fitting set, 100w led street light fitting set, 150w led street light fitting set, 1/18 pvc insulated copper wire, 3/20 (2.0 sqmm) flex copper wire, 3/20 pvc insulated vir copper wire, 7/16 pvc insulated vir copper wire, 7/20 pvc insulated vir copper wire, 25w/30w led street light fitting board, 2.5 flex wire, 1/18 copper wire, 3/20 copper wire, 7/16 copper wire, 7/20 copper wire, hook up wire, insulation tape, 250 w sodium lamp, 250 w sodium holder, 250 w s.v choke, 250 w s.v ignator, 250 w s.v capacitor, 250w sodium street light fitting, 250w sodium street light cover, 250w sodium street light gi pipe, 250w sodium street light pipe cover, 150 w sodium lamp, 150 w s.v choke, 150 w s.v ignator, 150 w s.v capacitor, 250w metal halide choke, 150w metal halide choke, 150w metal halide lamp, 150w metal halide ignitor, 150w metal halide capacitor, 250w metal halide lamp, 250w metal halide ignitor, 250w metal halide holder, 250w metal halide capacitor, 400w metal halide choke, 400w metal halide lamp, 400w metal halide ignitor, 400w metal halide capacitor, 400w metal halide holder, 40a isolator, 40a contactor, 63a 4 pole mcb switch, 63a s/p mcb switch, 63a 6 way connector, 63a isolator 4 pole, repair work & service charges for highmast flood light fittings (per pole), 3/20- 2 core aluminium wire, 4 sq.mm 3 core flat cable, 2.5 sq.mm 3 core flat cable, 1.0 sq.mm multi standared flexible copper cable, 1.5 sq.mm multi standared flexible copper cable, 2.5 sq.mm multi standared flexible copper cable, 4.0 sq.mm multi standared flexible copper cable, 24x24 meter board, 18x18 meter board, 12x12 meter board, 1/18 pvc insulated vir aluminium wire, 3/20 pvc insulated vir aluminium wire, 7/20 pvc insulated vir aluminium wire, 7/20 aluminium wire, 3/20 aluminium wire, 70 w sv lamp, 70 w sv choke, 70 w sv holder, 70 w sv capacitor, 70 w sv ignator, 1x40 w street light fitting glass, 40 w street light fitting side plate, 16 amps main switch, 32 amps main switch, 63 amps main switch, 32 amps main switch (dp), 5000 w street light automatic on/off timer switch, photanic intellingent automatic street light controlling divice switches timer / sensor on/off including fixing all complete set, 16 amps fuse carrier, 32 amps fuse carrier, 63 amps fuse carrier, 100 amps fuse carrier, 1x40 w street light fittings set with clamp set (2 sets), bolt-nut, 20mm gi, bend pipe, 3/20 wire, 1/40 w street light fittings set with heavy duty copper choke, starter, tube, led street light fittings accessories clamp set (2 sets) 32 mm bend pipe, bolt-nut wire, 25w led street light fitting pcb & drive including service charges, 45w led street light fitting pcb & drive including service charges, 18w led lamp, 20w led lamp, 23w led lamp, 30w led lamp, 36w led lamp, 40w led lamp, 50w led lamp, 72w led lamp, 100w led lamp, 120w led lamp, 36w cfl lamp, 36w cfl choke, 1x36w cfl street light fitting, 36w cfl pipe, 36w cfl fitting clamp, 36w cfl light cover, 25/30 w led street light fitting board, 25/30w led street light fitting drive, timer clock