Latest electric power supply Tenders | Government electric power supply Tenders

Central Government/Public Sector

CTN :44851916

30 Apr, 2026 48.52 Lacs

Sonitpur - Assam

Tender For provn of ac wiring for ac at np-88, np-87 building and replacement of submain wiring with copper wiring at af stn tezpur

Central Government/Public Sector

CTN :44841410

02 May, 2026 46.00 Lacs

Kamrup - Assam

Tender For day to day repair/ replacement of old unsv point wiring, light fittings, mcb, db at tamulpur an darranga, ac ref, water cooler, deep freezer and other connected item at tamulpur, darranga an hattigor and rep to street light at hattigor mil stn under

Central Government/Public Sector

CTN :44846055

25 Apr, 2026 43.73 Lacs

Dharwad - Karnataka

Tender For supply of supply of vrv-vrf copper pipe and insulation , refrigerant piping 2.2 tr dx split ac wallmount stand , refrigerant piping 2.2 tr dx split ac copper piping , drain piping 32 mm dia , control and transmission wiring- 4c x 2.5sqmm cable , control and transmission wiring- shielded 2c x 1.0 sqmm , r410a-r32 refrigerant charging , factory fabricated gss 22 g rectangular ducts , acoustic insulation with 25 mm class 1 , damper controller , 300mm dia flexible duct , rectangular mixing boxes , alumnium lenier grill , timer for hiwall split ac , 4 way cassette type indoor ac units capacity- 6.36tr-2400cfm duct indoor with remote controller , 4 way cassette type indoor ac units capacity- 5.5tr-2047cfm duct indoor with remote controller , 4 way cassette type indoor ac units capacity- 3.0tr-1183cfm 4way cassette indoor with remote controller , 4 way cassette type indoor ac units capacity- 2.0tr-1183cfm 4way compact cassette indoor with remote controller , 4 way cassette type indoor ac units capacity- 2.2tr-non vrv hiwall split indoor and outdoor with remote controller , central remote controller , 60 hp - out door unit , 10 hp - out door unit , 60 puls 14 hp outdoor unit ms stand , vrv-vrf multi connecting piping kit for odu , refnet- y joints , cable trays - 300mm-w x 100mm d x 1.8mm-thickness gi perforated cable tray with cover , installation and service charges for low side works , installation and service charges for high side works

CTN :44846014

20 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For tender for supply of ac installation - ac wiring , ac 2 ton , pipe , stablizer , installation

CTN :44875897

29 Apr, 2026 13.34 Lacs

Vadali - Gujarat

Tender For supply of terminal screw driver, 75mm connector , knife electrician db 100mm , neon tester pencil bit type, 500 volt , spanner set de set of 6 6x7 to 16x7 , steel measuring tape pocket type 5m , conduit pipe cutting and threading machines adjustable 15 to 30mm , solid state solar based single phase energy meter 5-30amps 240v , ammeter m.c. centre zero , single phase kwh meter analog, 5a, 250 v ac , single phase kwh meter digital, 5a, 250 v ac , three phase kwh meter analog, 25a, 415 v ac , three phase kwh meter digital, 25a, 415 v ac , 3 phase kw meter, 15a 440v , watt meter dynamo meter type, 5 amps and 250 v,1.25 kw , magnetic flux meter, 0-500 telsa , meter reading instrument mri , horse shoe magnet , crimping tool, 9 hex series , small crimping tools assorted 10-100 mm , wiring board on stand , set of wall jumper octagonal 37x450mm and 37x600mm , center punch, 100mm , screw driver heavy duty 200mm , screw driver heavy duty, 300mm , hammer ball peen, 0.5kg , hammer ball peen, 1.0 kg , hammer cross peen, 0.5kg , rawal tool holder bit no 8 10 14 16 , scriber 150mm , file flat 300mm rough , file flat round, 150mm smooth , file round, 300mm 2nd cut , file triangular, 150mm 2nd cut , spanner set of 6, double ended 18x18, 20x22, 21x23, 24x27, 25x27, 30x32 , adjustable spanner, 300mm , foot print grip 250mm , allen keys, set 5to11 , forge with hand blower, standard size , hand vice, 50mm jaw , pipe vice cast iron with hardened jaw open type, 100 mm , cut out relays ,16a,440v , reverse current relays ,16a,440v , over current relays,16a,440v , under voltage relays, 360v-440v , tower ladder on type wheels, min 10ft-max 30ft , rubber gloves, 5000 volts , solar street light, , solar traffic light, , solar panels , dc power supply, 250v dc, 25 amp , star delta starter, manual , automatic reverse forward starter , soft starter, 1 hp , battery charger, m15v, current controlled , solar street light lamp set , field regulator, 0-1000 ohmic, 2 amps , transformer single phase 1 kva , d.c. compound motor, 3 hp 250v with 4 point starter and field regulator laboratery type , d.c. shunt motor,3 hp 250v with 3 point starter and field regulator laboratery type , d. c. series motor, 3 hp 250v with 2 point starter and field regulator laboratery type , mg set consisting of squirrel cage induction motor 5 hp , a.c. ceiling fan 68watt 230v , ac table fan 68watt 230v , geyser storage type, 10 ltr , mixture and grinder, 750w, 240v , refrigerator 165 ltr , dmx controller , control panel , abney level , box sextant , computing scales two hectares , computing scales five hectares , offset scale for cadastral survey , metal cross staff box type , metal cross staff open type , dumpy level , fire extinguisher , height indicators , tracing board with lamp , pen knife , planimeter , telescopic alidade , indian pattern clinometers , ranging rod , offset rod , optical square , railway curves , survey plotting scale , stencil set , steel tape , steel band , surveyor umbrella , current meter //bid details 2 / 84

CTN :43994967

29 Apr, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

CTN :44846171

20 Apr, 2026 NA

Delhi - Delhi

Tender For supply of specified in srl no 19 of appendix a , s and f pvc connection pipe of 15 mm bore all as specified in srl no 20 of appendix a , s and f pvc flexible drain pipe of size 30 all as specified in srl no 21 of appendix a , cutting existing road hard standing with width not exceeding 750 mm and 1m deep all as specified in srl no 22 of appendix a , m and l for pcc type b1 using 20 mm graded stone aggregate all as specified in srl no 23 of appendix a , sitc of xlpe cable sizes 4 core 16 sqmm all as specified in srl no 24 of appendix a , m and l for excavation in trenches for cable laying all as specified in srl no 25 of appendix a , m and l for returning filling including spreading leveling watering in layers not exceeding 25 cm all as specified in srl no 26 of appendix a , m and l for removing excavated material all as specified in srl no 27 of appendix a , m and l for sand cushioning all as specified in srl no 28 of appendix a , m and labour for old size sub class b bricks laid in trenches all as specified in srl no 29 of appendix a , m and l for earthing with galvanized steel earth plate size 60cm 60cm 6mm thick all as specified in srl no 30 of appendix a , sitc of lt panel all as specified in srl no 31 of appendix a , sitc of deep freezer having hard top double door cap not less than 500 ltrs all as specified in srl no 32 of appendix a , m and l for point wiring with copper conductor cable 2 point 5sqmm all as specified in srl no 33 of appendix a , s and f switch socket 6a obliq 16a 5 in 1 flush type with gang box all as specified in srl no 34 of appendix a , sitc of inverter technology hot and cold split ac of cap 1 point 5 tr all as specified in srl no 35 of appendix a , s and f single pole and neutral steel metal enclosure with two pin and earth plug and socket with one single pole mcb of 32 amps , m and l for ac sub main wiring with 4 sqmm 1 core all as specified in srl no 36 of appendix a , s and f heavy duty copper pipe half inch dia all as specified in srl no 37 of appendix a , s and f heavy duty copper pipe 1 obliq 4 inch dia all as specified in srl no 38 of appendix a , s and f pvc drain pipes of suitable size 25 mm , sitc of inverter technology hot and cold split ac of cap 2 tr all as specified in srl no 39 of appendix a , m and l for ac sub main wiring with single core 6 sqmm all as specified in srl no 40 of appendix a , s and f heavy duty copper pipe of size 15mm all as specified in srl no 41 of appendix a , s and f heavy duty copper pipe of size 10mm all as specified in srl no 42 of appendix a , automatic line voltage correctors (step type) for domestic use (stabilizer) conforming to is 8448 (q2)

CTN :44857284

27 Apr, 2026 NA

Liluah - West Bengal

Tender For supply of bracket & clamp for fixing arrangement of under frame wiring in non-ac coaches as per dycee/w/llh's drg . no. led/tl/3/1272, item no. 1,2,3 & 4 ( item no.1 consist of 02 nos. per set, item no. 2 consist of 1 no. per set, item no.3 consisit of 2 nos. per set & item no. 4 consist of 2 nos. per set). [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44846043

21 Apr, 2026 3.14 Lacs

Chandigarh - Chandigarh

Tender For tender for supply of sitc of 1.5 tr split ac uits , copper pipe 6.4 mm dia with tube thickness 0.8 mm with insulation , copper pipe 12.7 mm dia with tube thickness 0.8 mm with insulation , 25 mm c-pvc pipe , ms stand of suiatble size for outdoor unit , supply & fixing of control cum transmission wiring and ac power supply cable 3x2.5 sqmm , supply & fixing of control cum transmission wiring and ac power supply cable 4x1.5 sqmm , supplying and fixing dp sheet steel enclosure complete

Central Government And Public Sector

CTN :44846089

02 May, 2026 94.44 Lacs

Chandigarh - Chandigarh

Tender For supply of supplying of 1.5 tr nominal capacity invertor type metal body , installation, testing and commissioning of of 1.5 tr inverter type ductable air cooled split ac unit as per item no.1 above in equipment room , providing and fixing heavt duty powder coated m s stand of suitable size made out of suitable guage ms shee , supply and fixing of 3 core 2.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply and fixing of 4 core 1.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply installation testing and commissioning including vaccumiazation and nitrogen testing of , supply installation testing and commissioning including vaccumiazation and nitrogen , supplying and fixing of 25 mm sizes of rigid upvc piping from outlet socket of ac unit complete with elbow , supplying and fixing dp sheet steel enclosure on surface or recess along with 25 or 32 a 230 v c curve dp mcb , supplying and fixing 5 amps to 32 amps rating, 240 or 415 volts c curve miniature circuit breaker suitable for inductive load of single pole and neutral , providing and fixing supply air grills of powder coated aluminum construction having a free area of not less than 70 percent without volume control dampers , supplying and installing of 150 mm width 50 mm depth 1.6 mm thickness nominal size of perforated hot dipped galvanised iron cable tray

Electric Power Supply Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector