Latest electric welding equipment Tenders | Government electric welding equipment Tenders

State Government

CTN :39871570

16 Apr, 2025 50.00 Lacs

Bhavnagar - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka mahuva under taluka panchayat, mahuva under mgnrega dist. bhavnagar - hollock wood in scantling, nickeled chromium brass cupboard lock 50 mm size, gi/aluminium sheet (0.8 mm thick), mobil oil, coloured inter locking c.c. paver block, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, m.s. tube 40 mm dia, binding wire, 25 mm thick prelaminated flush door shutter both side decorative, ptmt - towel rail (600 mm), pvc blind pipe 150 mm dia as per is: 12818, modular common burnt clay bricks of class designation 7.5, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, m.s. heavy weight butt hinges 100x75x3.5 mm is: 1341 marked, vitrified floor tile 60x60 cm, precast c.c. kerb stone m-25, interlocking c.c. paver block (60 mm thick, m-30), 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished), t.m.t. bars fe- 415, welding charges, ms grill angle diff size, carriage of hand broken stone agg. 40 to 63mm (upto 10 ton), crushed stone aggregate 40mm to 63mm size, crushed stone aggregate 6mm to 10mm size, p.v.c. pipes 10 kgf / sq.cm. 110 mm dia., putty gum etc, hand broken stone aggregate 40mm size to 63mm size., cast iron (spun) nahni trap .100 mm. inlet and 50 mm. outlet., galvanized m s tubes (medium grade) 25 mm dia., galvanized m s tubes (medium grade) 15 mm dia, fly ash bricks conventional, crushed stone aggregates 20mm siz, crushed stone aggregates 10mm size, hand broken stone aggregate 25mm size to 90mm size, applying priming coat, pvc pipe 25mm, paver block m200 grade 60mm thick., g.i. grill jali, mangos, guava, hard morrum, providing and laying g.i sheet 0.8mm thick corrugated, zeta fence-wooden pole and thorny brushes, vermi compost, mangrove, anodised aluminium screw 30mm, carriage of stone aggregate 20mm size, iron hinges 75 mm x 47 mm x 1.7mm, rubbles, carriage of rubble

corporations/Associations/Others

CTN :39644317

08 Apr, 2025 1.20 Crore

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply of general items as per the list from kashmir based general order suppliers having valid g.s.t number for maintenance of vehicles of jkrtc on daily/rate contract basis for the year 2025-2026. - safety glass triplex 5 mm, sheet glass 5 mm, laminated front screen glass curved 42x48, laminated front screen glass curved 36x48, laminated front screen glass tata bus 1618 bs vi, laminated front screen glass truck tata 1613 bs iii, laminated front screen glass truck tata 1616 bs iii, laminated front screen glass truck tata 1613 bs iv, laminated front screen glass curved eicher truck 2016, laminated front screen glass curved eicher truck 5016, laminated front screen glass truck tata 1918 t bs vi, laminated front screen glass truck tata 2818 t bs vi, laminateed front screen glass curved tata bus 1512 tc, laminateed front screen glass curved tata bus 1613 bs iv, laminateed front screen glass curved leyland cheetah bs vi, laminated front screen glass (tata sumo), laminated front screen glass (bolero mahindra), laminated front screen glass (scorpio mahindra), laminated front screen glass volvo (model b7r 9400), toughened side glass volvo(b7r 9400), laminated front screen ashok leyland (cheetah 1609), toughened side glass ashok leyland (cheetah 1609), toughened rear/back glass ashok leyland (cheetah 1609), toughened rear/back glass tata 1613 bs iv, toughened rear/back glass tata 1618 bs vi, toughened rear/back glass tata 1512 tc, front screen glass laminated (mahindra cosmo), door glass l&r tata 712, door glass l&r eicher 2016, door glass l&r eicher 5016, sheet ply 6 mm, sheet ply 12 mm, sheet ply 19 mm, rubber channel 131x132, velvet channel 131x132, front screen glass rubber truck, front screen glass rubber tata bus, rear/back glass rubber bus, aluminum gola 1 x12 x18 , aluminum gola 2 x12 x18 , aluminum gola 5 x12 x18 , aluminum rub rail gola, aluminum rub rail rubber, aluminum channel 36 , steel channel 36 , pop revits 1 , pop revits 1 1/2 , pop revits machine h.d, door lock l/r big size, door handle big size, door handle with key big size, door lock maruti type, door lock sumo type, battery terminal nut and bolt type(hd), battery thimble (hd), battery compound, tube nozzle, tube valve, tube patch cold 2.5 , tube compound, tube solution, air compressor pipe rubber braided hd, air compressor pipe rubber braided hd, grease gun pipe, deeco putty (bombay masala), paint enamel (white), paint enamel (black), paint enamel (red), paint enamel (yellow), paint enamel (blue), paint enamel (green), paint enamel (golden brown), paint enamel (grey), turpentine oil, paint brush 2.5 , paint brush 3 , paint brush 4 , writing brush no.8, writing brush no.12, writing brush no.16, side view mirror 4 x6 , side view mirror ambassador, side view mirror sumo, welding rods no.8 (i.s.i mark), welding rods no.10( i.si mark), welding glass with frame, welding glass, welding plier, sulphuric acid h2so4, nylon rope dia, 3/4 dia, silicon tube (200 gms), dhoti cloth, shellac compound, u-rubber epdm, flockchannel(namdachannel), steel /sling wire 13 mm dia, steel /sling wire 16 mm dia, foam 1 x3 x6 28 d, foam 2 x3 x6 28 d, seat cloth, s.t.rexine, foam rexine, valve lapping paste (coarse/fine), acrylic sheet (transparent), water proof canvas tarpaulin 18 x 24 ft, 550 gsm,16 eyelets, water proof canvas tarpaulin, 18 x 34 ft, 550 gsm, 16 eyelets, water proof polythene tarpaulin, 18x 24 ft, 350 gsm, 16 eyelets, water proof polythene tarpaulin 18 x 34 ft, 350 gsm,16 eyelets, welding cable ( i.si/b.i.s mark), battery cable ( i.si /b.i.smark), seat cover towel type(sumo/bolero/ scorpio/safari/ford), seat cover velvet filled with 1 foam (sumo/bolero/scorpio/safari/ford), rubber mating set (sumo/bolero/scorpio/ safari/ford), angle iron 1 x 1 x 1.5mm, angle iron 1 1/2 x 1 1/2 x 1.5mm, angle iron 2 x 2 x 1.5mm, flat iron 1 x 1.5 mm thick, flat iron 1 x 1.5 mm thick, flat iron 2 x 1.5 mm thick, metal putty, g.i.sheets 6 x3 (16 gauge), g.i.sheets 6 x

Central Government/Public Sector

CTN :39645418

03 Apr, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and

Central Government/Public Sector

CTN :39662371

03 Apr, 2025 NA

Nagpur - Maharashtra

Tender For proposed reconditioning of cupped at welding by translamatic robotic welding method to rail joints and wheel burns/scabs rails on nagpur division.

Central Government And Public Sector

CTN :39662346

03 Apr, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of at welding portion for 60 kg 90 uts/60e1 r260 grade rails using compressed air-petrol pre-heating system, 3 piece pre-fabricated moulds using single shot crucible fitted with automatic tapping thimble for welding of rail joints under the jurisdiction of aden/ii/bhilai of raipur division.

CTN :39662368

03 Apr, 2025 NA

Kharagpur - West Bengal

Tender For flash butt welding of 60kg 90uts rails on cess using contractor's self-propelled rail cum road / mobile fbw plants, tools, equipment and consumables under the jurisdiction of den/west/kgp. (2nd call)

CTN :39714605

11 Apr, 2025 NA

Multi City - Multi State

Tender For execution of supply of 6000 at welding portion for fusion welding of rail joints by use of compressed air petrol/lpg along with three-piece mould by automatic tapping thimbles only for various rail section for maintenance of lwr track under jurisdiction of sr.den/central/ckp.

Central Government / Public Sector

CTN :39731897

22 Apr, 2025 NA

Koraput - Odisha

Tender For koraput -singapur road doubling project : execution of p.way works, welding of rail joints, transportation of p.way materials and other connected works etc in between bhalumaska - singapur road stations on koraput -singapur road doubling project in waltair division, east coast railway.

Central Government And Public Sector

CTN :38934831

04 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor

Central Government And Public Sector

CTN :39646486

01 Apr, 2025 NA

Multi City - Multi State

Tender For (a) usfd testing of old flash butt welding joints by phased array ultrasonic weld tester (paut) in the jurisdiction of kir and lmg division of nf railway. (b) grinding of weld fins of fb weld rail (52 kg / 60 kg) with all tools and plants at site in running rail without block as per direction of irpwm / fb manual and as per directed by engineer in charge or his representative at site in the jurisdiction of lmg division.

Electric Welding Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors