Latest electrical pump Tenders | Government electrical pump Tenders

Central Government/Public Sector

CTN :38938725

01 Feb, 2025 NA

Raipur - Chhattisgarh

Tender For corrigendum : annual rate contract for spares of boiler circulating pump of m/s ksb make - thrust bearing plate,luvak 250-470/1, hex hd screw,901.02,ksb,motor,luvak 250+, keep off device,ksb,motor,luvak 250-4701, impeller,luvak 2x300-475/1, plain bearing,310.01,luvak 250-470/1, luvak 250-470/1:brg sleeve 105/ 125x 215, joint ring,411.11,ksb,250-470/1,luvak, joint ring,411.13,ksb,250-470/1,luvak, o-ring,412.01,luvak 250-470/1, o-ring,412.04,luvak 250-470/1, o-ring,412.05,luvak 250-470/1, o-ring,412.07,luvak 250-470/1, casing wear ring,502.01,luvak 250-470/1, bearing sleeve,529.02,luvak 250-470/1, parallel pin,562.01,luvak 250-470/1, circlip,932.02,luvak 250-470/1, hs hd cp scrw,914.00,ksb,luvak 250-400/1, lck wshr 17,930.11,ksb,luvak 250-400/1, washer,550.01,pump,luvak 250-400/1 hv, hs hd cp scrw,914.20,ksb,luvak 250-400/1, lck wshr 13,930.20,ksb,luvak 250-400/1, hx sckt scrw,914.23,ksb,luvak 250-400/1, lck wshr 17,930.23,ksb,luvak 250-400/1, piston ring,50-1,ksb,luvak 250-400/1, hx hd scrw,901.01,ksb,luvak 250-400/1, lck wshr 31,4,930.01,ksb,luvak 250-400/1, casing wear ring,502.01,luvak:250-400/1, hx sckt scrw,914.09,ksb,luvak 250-400/1, safety device,930.09,ksb,luvak 250-400/1, stud,902.08,ksb,luvak 250-400/1, hex nut,920.08,ksb,luvak 250-400/1, lck wshr 17,930.08,ksb,luvak 250-400/1, circlip,932.01,luvak 250-400/1, lck wshr 17,914.03,ksb,luvak 250-400/1, hs hd cp scrw,914.04,ksb,luvak 250-400/1, hx sckt scrw,914.05,ksb,luvak 250-400/1, lck wshr 13,930.05,ksb,luvak 250-400/1, retaining ring,506.02,luvak 250-400/1, hs hd cp scrw,914.22,ksb,luvak 250-400/1, lck wshr 10,7,930.22,ksb,luvak 250-400/1, hx hd scrw,901.02,ksb,luvak 250-400/1, lck wshr 25,3,930.02,ksb,luvak 250-400/1, hs hd cp scrw,914.06,ksb,luvak 250-400/1, lck wshr 10,7,930.06,ksb,luvak 250-400/1, plain bearing,luvak,pump,250-400/1, plain bearing,luvak,pump,250-400/1, gasket,400.14,luvak:250-400/1, gasket,ug1531185/20,luvak,250-400/1, gasket,411.11,ksb,250-400/1,luvak, o-ring,412.01,luvak 250-400/1, o-ring,412.02,luvak 250-400/1, o-ring,412.03,luvak 250-400/1, o-ring,412.04,luvak 250-400/1, o-ring,412.05,luvak 250-400/1, o-ring,412.07,luvak 250-400/1, casing wear ring,502.02,luvak:250-400/1, lck wshr 17,930.07,ksb,luvak 250-400/1, joint ring,411.12,ksb,250-470/1,luvak, parallel pin,562.02,luvak 250-470/1, segmental ring,501.02,ksb,motor,luvak 2+, parallel key,940.05,ksb,motor,luvak 250+, strainer insert,ksb,motor,luvak 250-4701, stud,902.02,ksb,motor,luvak 250-470/1, joint ring,411.01,luvak 250-470/1, joint ring,411.10,ksb,250-470/1,luvak, o-ring,412.02,luvak 250-470/1, o-ring,412.03,luvak 250-470/1, retaining ring,506.01,luvak 250-470/1, retaining ring,506.02,luvak 250-470/1, bush,ug1495126/544,luvak 250-470/1, washer,550.02,pump,luvak 250-400/1 hv, parallel key,940.01,luvak 250-470/1, parallel key,940.02,luvak 250-470/1, parallel key,940.03,luvak 250-470/1, parallel key,940.04,luvak 250-470/1, thrust bearing plate,luvak 250-400/1, joint ring,411.01,luvak:250-400/1, plain bearing,310.02,luvak 250-470/1, thrust brg segment,387.01, bearing sleeve,529.01,ksb,motor, bearing sleeve,529.02,ksb,motor, bearing,310.02,ksb,motor, bearing,310.01,ksb,motor

CTN :39084235

15 Feb, 2025 40.00 Lacs

Varanasi - Uttar Pradesh

Tender For supply of frp pool size 80 x 20 x 4.6 feet , counter current machine , heat pump 200000 ltrs , water circulating pump , plumbing work , electrical work

CTN :39014857

28 Jan, 2025 12.89 Lacs

Bengaluru - Karnataka

Tender For tender for drilling of bore well with electrical pump for nagaravana at panathuru sy no.52 & 53 of k.r.puram range of bangalore urban division for the year 2024-25

CTN :38651814

31 Jan, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 23bhac002 turbo alternator 750kw and main circulating pump wnc ships - pressure gauge 4 dial 0-60psi , spring retaining pin , epicyclic gear drive assy , o ring , extraction pump , belt power grip 1250h 3 wide , spring baffle retaining , ring gland , spacer for worm wheel

Central Government And Public Sector

CTN :38901640

31 Jan, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of m/s eagle burgmann germany make complete mechanical seal for primary circulating pump of make ms ksb

State Government

CTN :37994994

05 Feb, 2025 17.31 Crore

Hanumangarh - Rajasthan

Tender For corrigendum : construction of 10 cs discharging capacity, efficient vertical type electrical pumps of 20 m lift at sangeeta with outfall through 5 km. long pipe line outfall in anoopgarh including drain and cd works (p-352)

State Government

CTN :37995007

05 Feb, 2025 1.59 Crore

Hanumangarh - Rajasthan

Tender For corrigendum : construction of 5 cs discharging capacity, efficient horizontal type electrical pumps (2 no of pumps each one on either side of igmn) of 20 m lift in village lune ki dhani and dabli khurd with outfall into igmc (p - 347)

CTN :37983382

22 Jan, 2025 17.31 Crore

Hanumangarh - Rajasthan

Tender For corrigendum : construction of 10 cs discharging capacity, efficient vertical type electrical pumps of 20 m lift at sangeeta with outfall through 5 km. long pipe line outfall in anoopgarh including drain and cd works (p-352)

CTN :37983386

22 Jan, 2025 1.59 Crore

Hanumangarh - Rajasthan

Tender For corrigendum : construction of 5 cs discharging capacity, efficient horizontal type electrical pumps (2 no of pumps each one on either side of igmn) of 20 m lift in village lune ki dhani and dabli khurd with outfall into igmc (p - 347)

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

Electrical Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

State Government

State Government