Tender For corrigendum : design engineering supply installation testing commissioning and annual maintenance service of flood early warning system for 105 mw ushp ii kangan - sensor station, radar type river level sensor with tilt meter including all accessories, software & mounting arrangement, radar type river velocity / flow sensor with tilt meter including all accessories, software & mounting arrangement, sensor data acquisition equipment including data loggers, modems, etc. with all accessories, vsat communication setup including all hardware, software, fixed & recurring fees, etc., terrestrial communication setup (gsm/gprs modem / multi-sim internet generator, etc.) including all hardware, software, fixed & recurring fees, prefabricated enclosure with internal & external lighting, fire detection & suppression system, etc. and associated civil works, hybrid spv based power supply system with li-ion (lifepo4) batteries and all accessories including cables, distribution arrangement including protection, control & monitoring systems, command & control centre, vsat communication setup including all hardware, software, fixed & recurring fees, etc, terrestrial communication setup (gsm/gprs modem / multi-sim internet generator, etc.) including all hardware, software, fixed &recurring fees, prefabricated enclosure (porta cabin) along with internal & external lighting, fire detection & suppression system, air conditioning, access control system, etc. and associated civilworks, ups with batteries and associated cables & cabling accessories, distribution arrangement including protection, control &monitoring systems, complete hardware& software for ews command & control centre (cloud application/software, workstations, mini ups & peripherals, hooters, pa system, printers, storage, networking & it security equipment, led display unit, laptop, etc.), monitoring station at respective power house and head works wangath link, vsat communication setup including all hardware, software, fixed & recurring fees, etc, terrestrial communication setup (gsm/gprs modem / multi-sim internet generator, etc.) including all hardware, software, fixed &recurring fees, complete hardware & softwares for ews monitoring station (workstation with mini ups & peripherals, cables & cabling accessories, hooter, printer, networking & it security equipment, etc.) for assessing the cloud dashboard and nhpc provided dashboard, common, satellite phone set with all accessories, fixed & recurring fees, motorized siren with starter panel and other accessories(complete in all aspects), ip based cctv cameras (ptz type) with accessories & software(at discharge ,command and control, siren, monitoring stations)., earthing & lightning protection for all sensor stations, cc&cc, & monitoring station, industrial grade furniture including racks, network panels / enclosures, tables, chairs, etc. for all locations as per requirement, centralized monitoring station including all the hardware and associated cloud software for complete ews with licenses (application specific software for real-time data acquisition, retrieval, access control system, etc. and generic software like operating system, ms office, adobe acrobat, anti-virus, etc. along) at corporate office jammu/srinagar, automatic weather station including all associated systems and sensors, annual maintenance service (ams) for three years ( 03 years), mandotary spares, radar type river level sensor with tilt meter including all accessories,software, radar type river velocity/ flow sensor with tilt meter including all accessories,software, sensor data acquisition equipment including data loggers,modems,etc.with all accessories, hybrid spv based power supply system with li-ion (lifepo4) batteries and all accessories including cables, distribution arrangement including protection,control & monitoring systems
Tender For supply of nylon rope 8mm , nylon rope 12mm , nylon rope 24mm , iron cutting blade 12 inch , aluminium stood 6 feet , aluminium stood 2 feet , plumb bob , welding shield , hammer 2 kg , measuring tape 5 mtr , 3 by 4 inch flexible pipe , tasla , iron cutting machine big , mason thread 100m , spirit level 10 inch , gum boot , hand gloves cotton , paint brush 75 mm , paint brush 100 mm , bar bending machine with 3 kw motor power , supply of diesel fully automatic 10 by 7 jaypee concrete mixer machine , rebar tying machine 12 point 8 v , ms welding rods , iron cutter machine blades 12 inch , hand grinder blades 4 inch , drilling machine with drill ktis , syntex tank 1000 ltr , syntex tank 500 ltr , electric hand drill machine 10 mm , gen set 2 point 5 kva portable , welding machine 400 amp , synthetic enamel paint sand colour , synthetic enamel paint og colour , synthetic enamel paint brown colour , quick setting compound , anti cut hand gloves , wire 16 sqmm , wire 10 sqmm , 02 x concrete mixer dhpp n , 01 x 7 ton hitachi
Tender For supply of demand of maint stores in ge minnie bay for the qe mar 2025 - supply only calcium hypo chlorite , supply only alum , led batten 20 w , led batten 10 w 2 ft , cable copper single core x 10 sq mm mutli strand , energy efficient led flood light fitting light fitting 250 watt , supply onl lime in dust , energy efficient led street light fitting 90 watt , energy efficient led flood light fitting light fitting 200 watt , energy efficient led street light fitting 60 watt , energy efficient 40 w led surface mounted light fitting of approx size 2 feetx 2 feet , supply only poly aluminium chloride , energy efficient 40 w led recess mounted light fitting of approx size 600 mm x 600 mm , energy efficient led flood light fitting light fitting 150 watt , insulation electric adhesive tape , energy efficient led street light fitting 70 watt , energy efficient led building security light fitting 48 watt , ht cables of 95 sqmm 3 core 11 kv earthed grade , thermoplastic-polycarbonate cable junction box ip 66 of size 155x210x92 , energy efficient led bay light fitting light fitting min 120 watt , switch socket combination of 5 pin 5 or 6 amp , energy efficient led street light fitting 72 watt , ht cables of 120 sqmm 3 core 11 kv earthed grade , straight through cold shrinkable type joint kit suitable for ht ug cable , thermoplastic-polycarbonate cable junction box ip-66 of approx size 205x255x112 , energy efficient led flood light fitting light fitting 120 watt , energy efficient led bay light fitting light fitting 80 watt , supply only copper sulphate in 50 kg bag f , switch socket combination box type of 5 pin 5 or 6 amp , out door gate light with led 7 or 9 w , xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 3.5 core 50 sqmm , xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 3.5 core 70 sqmm. , xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 3.5 core 95 sqmm. , xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 4 core 10 sqmm , xlpe insulated, armoured heavy duty electric cable with aluminium conductor,1100 volts grade, cross-sectional area of size 4 core 16 sqmm. , cable copper 3 core x 1.5 sq mm , xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 3.5 core 25 sqmm , xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 3.5 core 35 sqmm. , multistrand copper conductor frlsh grade of size 6.0 sqmm , mcb sp 20 a 230 v , multistrand copper conductor frlsh grade of size 4.0 sqmm , cable jointing kit for 1100 volt grade cable for straight through, heat shrinkable cable of size 10 to 16 sqmm 3.5 core. , supply only soda ash in 50 kg bag , supply only bleaching powder , hydraulic automatic door closure upto 60 kg , flushing cistern low level pvc 10 ltr with complete fitting , stop cock cp 15 mm with female thread , acrylic distemper paint , mixer wall with non-telephone shower , sink kitchen ss with draining board 41inchx20inch , plate rack kitchen ss 900 x 750 x 250 mm 36inchx30inchx10inch , grating pvc dome type 125 mm cat no 112 , commode seat cover for ewc with hinges colour white , sink kitchen ss wo draining bd 60hl size 610 mmx 460 mm 24inchx18inch and bowl size 550 mm x 405 mm , health faucet set with hook 15 mm for ewc , butt hinges ss medium weight cold rolled 150 mm 6inch long isi marked , bib cock ss 15 mm fancy type , wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm alluminium alloy , mixer basin central hole without pop-up waste system , urinal pot porcelain 17inchx14inchx10inch , angle cock cp 15 mm with flange 2 way , shower rose ss 95mmx65mmx15 mm dia , butt hi
Tender For supply of pallets stacker/forklift capacity 2 ton, standard load center distance - dh/dv for forklift to 400 kg 500/500 mm, automatic transmission, type of drive - single(two tyres in the front), max engine hp range at rate d rpm <=50 hp, max engine torque at rated rpm >=200 nm, no of cylinders - 4, engine cubic capacity - 3300 c c, number of forward speed gears - 2, reverse speed gears - 2, engine cooling system - liquid cooled, forklift gra deability >21%, brake system - hydraulic, tyre type - pneumatic, lifting stages - 2, lift height - 3 to 3.8 meters, max fork spread - 950 mm, fork size - 1000 mm, overall length - 3580 mm, overall width - 1210 mm, overall heig ht raised - 4260 mm, collapsed height - 2630 mm, free lift height - 105 mm, wheel base - 1700 mm, instrument panel for diesel operated forklift - fitted with pressure gauge,coolant temperature gauge,engine hour-meter & fu el level gauge and switch key for starting, accessories - head light two numbers, rear light one nos, and signle li ght, light reflectors, electric horn, parking brake, rear view mirror, rear towing hook, adjustable cushioned driver seat and driver overhead guard with steel reinforcement at the to for safety of driver, seat belt with interlocking, operators presence switch (ops), warranty 12 months for forklifts. make - godrej or equivalent. [ warranty period: 12 months after the date of delivery ]
Tender For corrigendum : supply of kitchen equipments - mobile hot cart , floor grating with trough , 2 level service trolley , insect control unit , hand wash sink unit , storage rack - 4 tier , veg wash 3 sink unit , grease trap , perforated wall shelf - 2 tier , waste bin - 80 ltr , potato and onion storage bin , fire suppression system , dough kneader machine , ingredient bin , work table with 1-bowl sink and under shelf , masala trolley , wall shelf - 2 tier , chappti dosa plate with puffer , spreader table , combi oven - 6 tray , electrical tilting boiling pan 100ltrs manual tilt , electrical tilting bratt pan 100ltrs manual tilt , work cabinet with 2 - under shelf and door , chest freezer - 425 ltr , 4-door referigerator , mobile table with under shelf , work counter with drawer , commercial table top induction - 5 kw , work table with 2- under shelf , work table with1 bowl sink and cross bracing , work table with cross bracing , pulverizer , masala grinder , potato peeler with stand , pot wash 3 sink unit , semi automatic chappati machiine - convyor type - 800-1000 chappati p-hr , ventilation canopy with fresh air , stock pot range , 2-burner range , perforated wall shelf , hose reel , pot rack , cold room panel air cooled semi hermatic reciprocating compressor , chiller refrigeration - air cooled , perforated storage cold room rack - 4 tier , food storge rack - 4 tier , dunnage rack , l- shape dish landing table with 2- sink and garbage chute , wall mounted backet shelf , pre-rinse unit , hood type dish washer , clean dish landing table , wall mounted basket rack , dish storage rack , cutlery trolley , hot bain-marie counter - 1 by 1 gn pan - 5 nos. , cold bain-marie counter - 1 by 1 gn pan - 3 nos. , neutral counter , plate speed rail , trolley for dirty plate , water cooler - 80 l , glass rack , display refrigerator , work table with sink , pull out waste bin and door , automatic coffee machine - bean to cup , visi cooler , commercial microwave oven , commercial table top warmer induction , work table with 2 - under shelf and door , domestic refrigerator , work table with sink under shelf , water boiler , ro plant , faucets swan neck , faucets deck mounted , water filter for water cooler , water filter for coffee machine , work table with1 bowl sink and under shelf , water filter for combi oven , work table with sink and under shelf plus ohs , condensation canopy
Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and
Tender For supply, installation, testing commissioning of fully automated cattle feed plant of capacity 2-3 mt per hr with ancillary equipment etc - supply, installation, testing & commissioning of fully automated (cnc-type) cattle feed plant of capacity 2-3 mt per hr with all ancillary equipment, spares including electrical, support structure work as per required activity sections, specification and indicative list of equipment as below: - all sections related to cattle feed plant fully automated of 2-3 mt/hr capacity to be completed as mentioned below: - a) in take storage & distribution intake dumping hopper with magnetic grill intake chain conveyor 6- 8 tph (with geared motor and drive parts) bucket elevator 15 mtr. ht. and 6 -8 tph (with geared motor and drive parts) magnet system cascade jute remover (with geared motor and drive parts) distribution conveyor (with bends, pipes geared motor and drive parts) bin dsitributors storage bins (5 no.s) 50 mt. capacity level sensors (10 nos.) gates for storage bins 5 no.s bin discharge conveyor (5 no.s) (with geared motor and drive parts) weighing hopper of capacity 500kg with pneumatic gate (with load cell with accessories for weigh hopper) buffer hopper accessories manual dump hopper with pneumatic gate batch conveyor (with geared motor and drive parts)b) grinding section grinding section bucket elevator 6 8 tph (with geared motor and drive parts) magnet system cascade bin for hammer mill manual operated slide gate feeder for hammer mill (with geared motor and drive parts) magnet system vfd panel for the feeder for hammer mill full circle hammer mill (with electric motor and drive parts) extra hopper below hammer mill bucket elevator to carry the material from hammer mill to the bin of mixer 6 8 tph (with geared motor and drive parts)c) mixing section. mixing section- hopper above mixer pneumatic operated gate medicine hopper pneumatic operated gate for medicine hopper batch mixer ( 500 kgs) pneumatic operated gate for mixer mixer gear box: (with geared motor and drive parts) hopper below mixer mash feed conveyor (with geared motor and drive parts)d) pelleting section. pelleting section - bucket elevator with 10 12 tph capacity pneumatic two way flap (with geared motor and drive parts) bin for pelletizing mill ( 1no.s) manual operated slide gate screw feeder for pellet mill (with geared motor and drive parts) auto feeder for pellet mill ( vfd / ac frequency drive) with auto control panel twin shaft steam conditioner (2no.s) (with geared motor and drive parts) junior pellet mill gun drilled , high chrome die (with geared motor and drive parts)e) cooling section. cooling section - pellet cooler counter flow crumbler, feeder to crumbler and vfd pellet conveyor bucket elevator to carry the cooled pellet to the gyro screen to separate the powder particle. (with geared motor and drive parts) pneumatic two way flap vibro screenf) bagging section. bagging section - bagging bin pneumatic gate automatic bagging machine slot conveyor (with geared motor and drive parts) stitching machineg) compressed air system. compressed air system - air compressor ( anest awaita / elgi / kirloskar ) (with drive motors) frl unit compressed air pipe line with control valves and accessories.h) mollasses dosing system. molasses / oil batching section - molasses / oil pump (with drive motors) batch tank (2mt) service tank with load cell & display pipe line between batch tanks & service tank control valve & accessories geared pump for liquid spray plc automation for molasses dozer elecric distribution & control panel - elec. panel includes main, switches, fuses, starters, relays, bus bars etc. for plant motors only. remote panel electric cables & earthing wire for plant motors structure material - ms girder, channel, chequer plate angles etc as per is:2062. hardware & painting gravity piping / transition pieces automation - automation / computerized pre-weighing: plc based programmer allow
Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) levelindicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous