Latest electron probe microanalyzer Tenders | Government electron probe microanalyzer Tenders

CTN :38900847

29 Jan, 2025 25.00 Lacs

Nagpur - Maharashtra

Tender For corrigendum : providing supplying. installation laboratory equipment at p.w. laboratory sadar, nagpur - providing supplying. installation & commissioning at required site of compression testing machine with automatic pace rate controller, capacity compressiontestingmachine(mu-2000kn)with flexure attachment including running software as specified in specification as directed by engineer in-charge.(with yearlycalibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of cement cube vibration machine. (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of vibrating table for concrete cubes 50cm x 50 cm.(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of concrete cutting machine.(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of sieve shaker (motorized) for 20cm, diameter (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), sieve shaker motorised for 30cm dia sieve with bullt-in digital timer (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of analog silver schmidt concrete test hammer. (proceq)(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of ring and ball test apparatus (softening point electrically heated semi-automatic digital).(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of digital hot air oven(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of ductility testing machine with digital display without cooling (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying. installation & commissioning at required site of laboratorydigitallaboratory california bearing ratio test apparatus with aimil daq & aimil analysis module, four speed, with gun metal mould assembly cbr test apparatus, (motorized electronic 4 speed with gunmetal mould) without (scada )(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), automatic modified marshall apparatus, 100kn for 4&6 dia samples with marshal softwareincluding running software as specified in specification as directed by engineer in-charge.(without computer)(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of kinematic viscosity cannon tube size no.6(with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of absolute viscosity cannon tube size no. 12 (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), absolute viscosity cannon tube size no. 13. with constant certificate & calibration. (with yearly calibration certificate for five years and amc in 4 time yearly for period of five years.), providing supplying, installation & commissioning at required site of grinder machine (bar cutter).(with yearly calibration certificate for five year

CTN :38616351

08 Feb, 2025 92.00 Lacs

Haridwar - Uttarakhand

Tender For corrigendum : e-tender for supply of various medical equipment of physiology department of govt. medical college haridwar - experimental physiology -demonstration set , electric time markers 100/sec, tuning fork time marker 100/sec., spirit lamp, marys tambour, demonstrations eye piece, double demonstration eye piece, stage incubator, perimeter pristely smith s/lp .984 b & t, haemoglobinometer, sahlis or hellige (with space), haemocytometers, sphygmomanometer digital, stethoscopes, stethoscopes, demonstration with mutipleear pieces, polygraphs, venous pressure apparatus, spirometer, ordinary, gas analysis apparatus, haldanes students type, van slykes apparatus manometric, gas analyser automatic for co2, o2,n2, douglas bag complete, basal metabolism apparatus, erogographmosses, clinical digital thermometer, compass aesthesiometer, thermo esthesiometer, algometer, apparatus for passive movement, knee hammer, stethograph, bicycle ergometer, olfactometer, ophthalmoscope, schematic eye, phakoscope, perimeter with charts (listers), colour perception lantern edridge green, maddox rod, newtons colour wheel, tuning forks to test hearing 32-10,000 cps(sets), dynamometer, otoscope (47), sterilizer electric, instrument trolley, stop watches, centrifuge, high speed with tachometer, colorimeter photo-electric, ph meter, oxygen cylinder with trolley, co2 cylinder with trolley, electronic stimulator, water distillation still, all glass distillation apparatus double stage, voltage stabilizer, weighing machine, height measuring machine, digital student physiograph, thermometer, ishihara colour vision chart, snellen chart, near vision jaegar

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

CTN :38658611

21 Jan, 2025 NA

Gurdaspur - Punjab

Tender For corrigendum : qcc and survey eqpt - buoyancy balance , digital ph meter , standard sand for density test , ring and ball appartus , core cutting machine , cbr apparatus , bitumen penetration kit , universal testing machine , sand replacement method , cylindrical mould , density backet , los angels abrasion testing machine , standard tar viscometer , modified marshal apparatus , triaxial test apparatus , vibration table , bitumen ductility testing machine , extraction and sample preparation , upv , stop watch holder , deflectometer , sieve having dia 20 , sieve having diameter 30 cms , sieve having diameter 45 cms , sieves of various size as per morth specification , sieve analysis for dbm bc wbm wmm as per morth , rapid moisture meter , filter paper , stopwatch , le chatalier apparatus , bitumen thermometer digitial up to 200 degree celcius , vicat apparatus , slump test apparatus , aggregate impact test apparatus , oven , rebound hammer digital

CTN :38870833

12 Feb, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of nineteen (19) instruments. - instruments, sem - edxa, hand held forensic light source with uv and ir capability along with photographic filters, comparison microscope with transmitted light source, automatic flashpoint tester (pmc), automatic flashpoint tester (coc), automatic cloud & pour point apparatus, stabinger viscometer, automatic titrator, ion chromatograph, facial recognition software (3d) with accessories for analyzing cctv footage analysis, forensic image & video enhancement system, advance speech lab with automatic diarization system, multi-speech analysis software for speaker identification with ambience, xrf spectrophotometer with karat meter, high resolution spectral comparator (hrsc), 3500 genetic analyser with accessories and kits, automated bio-chip array analyzer, advanced / sophisticated bio - specimen cold storage facility with accessories, effluent treatment plant with accessories

CTN :38888517

20 Jan, 2025 18.23 Lacs

Mumbai - Maharashtra

Tender For supply and installation of dynamics lab equipments - universal governor appartus (as per technical specification attached), gear train setup holdingtorque apparatus (as per technical specification attached), static & dynamic balancing apparatus (as per technical specification attached), slip & creep measurement apparatus in belt drive (as per technical specification attached), whirling of shafts apparatus (as per technical specification attached), cam analysis machine (as per technical specification attached)

Central Government / Public Sector

CTN :38912415

20 Jan, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of set of chemicals & glassware apparatus required for regular laboratory analysis as per the set details consisting of 10 items mentioned overleaf.note: firm has to submit past performances pertaining to the subject item along with their offer.

Central Government/Public Sector

CTN :38821002

20 Jan, 2025 NA

Bangalore - Karnataka

Tender For request for expression of interest (eoi) dsitc of laboratory turnkey work for imsf (on behalf of iisc) at iisc campus, bangalore - laboratory automation with track , fully automated biochemistry analyser , fully automated immunoassay analyser , ph meter , abg analyzer , lithium analyser , hba1c analyzes , elisa reader and washer , electrolyte analyser , centrifuge machine , centrifuge machine , refrigerator , tachometer , tds meter , deep freezer , binocular microscope , ph meter , analytical digital balance , centrifuge machine , centrifuge machine , binocular microscope , esr instrument , urine analysis , co-angulation analyser , automatic timer , incubator , slide stainer automatic , urinometer , centrifuge , micropipettes , slide cabinet , flow cytometry , haematology analyser , refrigerator , analytical digital balance , binocular microscope , refrigerator , automatic timer , slide stainer automatic , slide cabinet , digital slide scanner , micro pipettes , semi-automated microtome , grossing station , automated cover slipper , cytocentrifuge , penta/dual head microscope for histopathology , tissue processor , cryo microtome/cryostat , auto stainer for hc , temp.controlled tissue floating bath , storage cabinet for 10,000 blocks in numerical arrangement , temp.controlled rectangular laboratory use , hot plate , double distillation apparatus , embedding station , paraffin wax dispenser , paraffin block cabinet , slide warmer , single pan balance , hot air oven , colorimeter , binocular microscope , ph meter , analytical digital balance , elisa reader and washer , centrifuge machine , deep freezer (-20 degree) , serological water bath , blood culture automation system , automation identification and antibiotic susceptibility test , bio-safety cabinet , laminar air flow , refrigerator (400 litre) , loop sterilizer , bod incubator , anaerobic jar , autoclave machine -horizontal , autoclave machine-vertical , lyophilizer machine , immunoturbidometric machine , incubator , co2 incubator , spectrophotometer , hot air oven , dispenser , heat block , turbidimeter , ief platform , cbnaat machine , line probe assay machine (for tb) , automated system for isolation of mtb , microfuge , deep freezer (-20, -30, -80 degree each) , thermal cyder , microvolume spectrophotometer , automated extraction system , rt pcr machine , gel documentation system , uv transilluminator , electrophoresis machine , cold centrifuge , vortex mixture , dry bath , multiplex pcr system (molecular diagnostic platform) , pct machine , shaker for rpr , binocular microscope , stepper micropipettes , immunoanalyser-single dose entry , fluorescent microscope

CTN :33329349

28 Feb, 2025 NA

Katihar - Bihar

Tender For corrigendum : supply of dynamics ofmachinery lab instruments - motorized gyroscope, motorized governor apparatus, tool dynamomet er, models of gears, four bar chain mechanism, slide crank mechanism, cam analysis machine, static & dynamic balancing apparatus, bar pendulum or compound pendulum, whirling of shaft apparatus

Electron Probe Microanalyzer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector