Engine Alternator Hiring Tenders

Get complete information related to latest Engine Alternator Hiring Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Engine Alternator Hiring Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Engine Alternator Hiring Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

CTN :44720984

21 Apr, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of obs and b and d spares of diesel alternator of nt buland : - fuel filter ctg , lub oil filter , for kfa , v belt , coolant , rocker cover joint metalic , sea water pump , wp assembly , thermostat element , turbo charger , magnetic pickup , lub oil pressure switch , set of copper washer , alternator , hose , injector , set of joints , set of o ring , water pump belt 3 , water pump assembly , combined leak of pipe assembly , starter , supply hose , thermostat bypass hose , joint for thermostat cover , rubber hose , locating bolt , lub oil supply hose , hose straight , worm drive hose clip , fuel pipe , ss joint for exhaust manifold , speed control , leak off assembly , ss hose clip , ss hose clip sf , banjo bolt , special benjo bolt , rocker cover gasket , f002 g1b 704 chargine alternator , pr transmitter , heat exchanger , valve tappet , wire snap ring , valve collect 3 groove , vr toe , valve spring , engine controller 12v dc , starter 24v , starter 12v

Central Government/Public Sector

CTN :44514123

07 Apr, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of spares for cummins engine e e - seal valve stem part no 3943888 or 5253590 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761558 , valve exhaust part no 3969637 or 4089762 for engine assy, model-qsl-9, make- cummins suitable for engine sl no-73142859 and 73761559 , valve intake part no 3970727 or 4089761 for engine assy, model-qsl-9, make-cummins suitable for engine sl no- 73142859 and 73761560 , valve insert part no 3940152 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761561 , valve insert part no 3968074 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761562 , collect valve part no 3900250 for engine assy, model-qsl-9, make- cummins suitable for engine sl no-73142859 and 73761563 , guide valve stem part no 4934063 for engine assy, model- qsl-9, make-cummins suitable for engine sl no-73142859 and 73761564 , hose flexible part no 3282167 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761565 , pulley alternator part no 3972808 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761566 , cylinder head gasket part no 3967059 or 4981796 for engine assy, model-qsl-9, make-cummins suitable for engine sl no- 73142859 and 73761567 , oil pan gasket part no 3973509 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761568 , piston ring set part no 4089644 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761569 , lower engine gasket set part no 4089889 for engine assy, model- qsl-9, make-cummins suitable for engine sl no-73142859 and 73761570 , upper engine gasket set part no 4089978 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761571 , fuel pump assy.,part no 3975375 for engine assy, model-qsl-9, make- cummins suitable for engine sl no-73142859 and 73761572 , pipe air transfer part no 3883977 for engine assy, model- qsl-9, make-cummins suitable for engine sl no-73142859 and 73761573 , gasket oil sump part no 3939352 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761574 , gasket oil cooler part no 3918174 for engine assy, model-qsl-9, make- cummins suitable for engine sl no-73142859 and 73761575 , gasket oil cooler part no 3929011 for engine assy, model- qsl-9, make-cummins suitable for engine sl no-73142859 and 73761576 , gasket oil cooler part no 3992092 for engine assy, model-qsl-9, make-cummins suitable for engine sl no-73142859 and 73761577

CTN :44444975

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of tata 4 ton engine - sealing ring, hollow screw, filter element fluid pressure / oil filter cartridge, intermediate ring (2.5 ton) for self, gasket air comp 94mm dia, union heat exchanger plate, piston ring set 94mm dia (air comp), inlet valve seat rubber, exhaust valve seat rubber, sealing ring (2.5 ton), alternator assy (lucas tvs) a115 12v 36a (zil 131), spring (2.5 ton), cylinder liner std (2.5 ton), sealing ring ce (2.5 ton), fuel flexible pipe (from fuel filter to f.i.p), ce bush, stud m 10x40-is 1862-p-10-9 ss 9400, main brg set r/si, connecting rod bearing set r/si, valve delivery, injection nozzle, cylinder head with valves, rubber hose, clip hose 23ts 17669, bolt m10x70 is 1364 s 8.8, water pump kit (minor), bracket, bolt lifting hook (front), adoptor (tube dipstick), union water temp, over pressure valve, oil temp gauge union, pressure plate finger type, drive assy, accelerator rod(with spring & looking plate, fan assy (plastic) (2.5 ton), gasket kit complete (2.5 ton), ball bearing sre (2.5 ton), rectifier assy (2.5 ton), combi screw, valve guide std. (in let), thrust spacer, plate locking nut & bolt, screw, set of brg camshaft, inlet valve, gasket, sealing washer, fuel flexible pipe(from feed pump to fuel filter), felt tube filter insert stage 1, oil seal, brush set (4), locking plate, cooling water thermostat, rubber hose 22x31x160, hose clip 35 a is 17670, rubber elbow (water line to thermostat), rubber hose, temperature transducer (pricol ) ( mfr p, sealing ring, brush carrier assy, sloonoid switch, drive assy, bearing bush, fd coil assy, water drain plug, locking ring, lifting hook (front), bolt lifting hook (rear), bolt fuel filter, bolt mtg pad small, bolt mtg pad large, con rod brg r/s 1 (std) air comp, head air compressor with valves 94mm dia, fan distance piece, prv long, prv small, leak off pipe rubber hose with qty-02, over flow pipe (filter to fip) u type, oil dipstic complete assy, twin fuel filter assy, data plate, plate locking (2.5 ton), washer 0.5mm, hub for fan, bolt m8x35 (2.5 ton), starter motor assy (lucas tvs 24 volt), cylinder dia 94mm dia (air comp) 2.5 ton, assy oil sump, c e bush (2.5 ton)

CTN :44445050

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of tatra 815 euro version engine - shaft sealing g 60x80x13/ retainer seal, outlet insulation, top rubber seal (valve), sink screw, screw m5x10, clutch booster, hex nut m8 is:1364 (part-iii) 8-1983/ nut plain hexgon, diode, screw, m s nut, sealing ring 30x36, is:3175- 74 al, lock washer, hex hd screw m8x22 is:1364 (part-ii) 8.81983/ screw wood, clamping strip 9x235 csn 02 2757, gasket (6264001), gasket 0.5mm, sealing ring 33x3.2, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, sealing ring 33x3.2, clip for accelerator rod spring, shaft sealing a/bswfld 40x52x7 fpm 8015, clutch carrier, gasket 0.25mm, hose 100mm, hose 13x300 csn 137821.1, oil supply tube, lh, repair kit set (turbo blower rh & lh), clamping strip 9x235, gasket (06825-43), intake hose, alternator clamp, hose clamp / clamp, front cover, shim for engagement clutch bush, washer, self lubricating bushing, insulation tube, brush (443930151937), hose 36/46 l=45mm, shaft sealing 45x68x12.5, lock washer, sealing ring, spring washer, gasket, plain washer, sealing ring 25x21, sealing ring 14x20, washer 7.6/20x1.5 mgn 19.05.60/01.221, water proof starter motor 5.8kw/24v, hex hd screw m6x12 is:1364 (part-ii) 8.8-1983/ screw machine (106 103 140 611), gasket 0.50 mm, gasket 0.25mm, neck 20 csn 13 7854.22, plug, gasket (6264001), gasket 3 mm, hex hd bolt m 8x28 is:1364 (part-ii) 8.81983, tube, gasket 0.5mm, discharge tube, tube, hex nut m8 is:1364 (part-iii) 8-1983, shaft sealing gpv 30x55x9, is csn 02 9401.0, shaft sealing gpv 30x55x12, is csn 02 9401.0, spacer washer 0.05mm, gasket 0.5mm, gasket 0.25mm, gasket 0.25mm, hose rptu 127150 27/37, 420mm, lever pin, gasket 0.25mm, parallel key 6h9x6x25 is:2048-1983, directing sheet, clip for accelerator rod spring, gasket 0.25mm, shaft sealing a/bswfld 40x52x7 fpm 8015, gasket 0.25mm, gasket 0.25mm, hex hd screw m12x55 is:1364 (part-i) 8.8-1983, hose 100mm, gasket 0.25mm, hose 13x300 csn 137821.1, repair kit set (turbo blower rh & lh), gasket (06825-43), sealing ring 55x5 csn 02 9281.2 / sealing non-metallic round section, sealing washer, lid, needle bush hk 3520, sealing washer, spacer washer, front cover, rear cover, insulation, holder, outlet screw, resistor, washer, washer, self lubricating bearing 443932000210, holder, insulation, hex hd grease nipple 16m10x1 / fifting lubrication, insulation tube, holder, brush (443930151937), outlet screw, washer, insulation, clamping strip 9x360, shaft sealing g 60x80x13 / retainer seal (101-521-017-317), gasket, hose 36/46 l=45mm, 1.5 electric teflon insulated wire, eyelet round shape no 10, male female eyelet, adopter of steering pump, plug for front housing, fastening plate, bushing, washer 1.5mm, sealing ring 14x20 is: 3175-74 cu, sealing ring 28x2, intake valve guide, distance washer injectors (thicness 0.10 mm), cam shaftbush (thick), cam shaftbush (thick), sealing ring 120x3, sealing ring 25x21, gasket, sealing ring 11x7, screw, gasket, pin (304 002 3200), discharge tube, oil supply tube, washer, lock sheet 32, lock ring 24 is:3075 (part-i)-1986, gudgeon pin (304 3006), hose clip, lock washer, cover, plug m18x1.5 ona 1913.05, ring, self lubricating bearing, slotted nut m32x1.5, spacer washer 1.0 mm, nut plain hexagonal, hex hd bolt m 12x90, spacer washer 0.3mm, spacer washer 2.0 mm, ball bearing (6306), ball bearing (6303), gasket 0.25 mm, sealing ring 36x44, is 3175-74 al, lock ring 20 csn 022925.1, spring washer 22 is:6735-72, sealing ring 24x30 is:3175-74 al / sealing ring metal, hose l=180mm, clip 9 csn 02 2753.5, gasket 0.25mm, stud c m8x25 is:1862 -1975- 8.8, stud c m8x30 is:1862 (part ii)-1975- 8.8, clamping strip 9x235 csn 02 2757, hose holder, hose holder, gasket 3 mm, hose 25/35 l=90mm, sealing ring 20x26 is:3175-74 cu, plug, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, spacer washer 0.10mm, sealing ring, sealing ring 08x12, is:3175-74 cu / sealing ring metal, spacer washer 0.10mm, intake valve line, ball bearing 6206a

Loading, Please wait...

Engine Alternator Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector