Latest epoxy coating Tenders | Government epoxy coating Tenders

CTN :39860889

05 Apr, 2025 NA

Halisahar - West Bengal

Tender For supply of high performance anti-corrosion epoxy coating (two pack). as per rdso's sp ecn.no- m&c/pcn/123/2018 and rdso amendment no.1b ) revision 2.0 effective from sept.2020) a s an additional requirement. shelf life 12 months. [ warranty period: 30 months after the date of de livery ]

Private Sector

CTN :39841029

17 Apr, 2025 NA

Kamrup - Assam

Tender For supply of high performance, solvent free epoxy coating (r-95 or its equivalent) for use in repair of mainline

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

CTN :39825689

02 Apr, 2025 NA

Delhi - Delhi

Tender For quotation for patch painting and epoxy coating work at central animal house facility (cahf)

State Government

CTN :39816189

01 Apr, 2025 4.84 Lacs

Bengaluru - Karnataka

Tender For providing veneer panelling, melamine polish, work station, aluminium windows, and other allied works at room nor 501 &502 5th floor, 4th stage, m s building, bengaluru.

State Government

CTN :39439392

28 Mar, 2025 21.68 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work contract for anti-corrosive anti-erosive anti-abrasive polymeric epoxy coating on surface of condenser water box installed in unit-2 at 2x600 mw sstpp mppgcl dongalia

Central Government/Public Sector

CTN :39733329

07 Apr, 2025 NA

Erode - Tamil Nadu

Tender For corrigendum : supply and installation of composite flat panel with interlocking fitment as per specification given below: 12 mm soli d thickness wpc composite flat panels (dual tone colors) with interlocking grooves, cnc cut joint edges and wood texture, textured epoxy coating and ip 64 rated slide lock groove installed with horizontal u clamps on smoothened vertical grid plates in matrix patt ern using spray set rubber adhesive, with inset electrical groove path for lighting arrangements. area: 1160 sqft surface area for a height of 10 feet. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :39818637

07 Apr, 2025 NA

Tiruppur - Tamil Nadu

Tender For anti corrosive epoxy paint to colour basalt grey to ral 7012 having pack a and pack b to r dso specification rdso/ m&c/pcn /123/2018 qty. 25 litres (a&b) with colourless low odour mineral sprit to dilute epoxy coating material qty - 5 litres. firm to supply with shelf life of one year, one year at the time of supply. 1 set sample to be approved by sse/pway/ed before effecting bulk supply. [ warranty period: 30 months after the date of delivery ]

CTN :39792081

27 Mar, 2025 2.51 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , sarojini nagar , new delhi. =- acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply

CTN :39792136

26 Mar, 2025 3.04 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , rk puram , new delhi. - acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply of cp b

Epoxy Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Private Sector

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector