Latest erw tube Tenders | Government erw tube Tenders

State Government

CTN :39601724

17 Mar, 2025 4.52 Lacs

Mandi - Himachal Pradesh

Tender For dismantling of existing syphons and laying jointing, testing and carriage of new mserw pipe 400 mm dia syphon at rd 0

Central Government/Public Sector

CTN :39597160

17 Mar, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of erw tubes 6 nb (10.6 od x 2 thk) to aa10152

Central Government/Public Sector

CTN :39542084

17 Mar, 2025 NA

Nalgonda-T - Telangana

Tender For supply of ms erw pipes for 5x800 mw yadadri - 200 nb 6.35 thk mserw pipe as per is 3589 grade fe 410 , 250 nb 6.35 thk mserw pipe as per is 3589 grade fe 410 , 350 nb 6.35 thk mserw pipe as per is 3589 grade fe 410 , 400 nb 6.35 thk mserw pipe as per is 3589 grade fe 410 , 200 nb 9.5 thk mserw pipe as per is 3589 grade fe 410 , 250 nb 9.5 thk mserw pipe as per is 3589 grade fe 410 , 300 nb 9.5 thk mserw pipe as per is 3589 grade fe 410 , 350 nb 9.5 thk mserw pipe as per is 3589 grade fe 410 , 400 nb 9.5 thk mserw pipe as per is 3589 grade fe 410

Central Government / Public Sector

CTN :39568954

25 Mar, 2025 NA

Secunderabad - Telangana

Tender For l-shaped counter table supply to over telangana,maharastra, karnataka states with the following specific ations. main worktop: made of 25mm thick pre-laminated board(plb) of e1-p@ grade and approved shade confirming to is-12823:1990, edge banded with matching 2mm thick pvc lipping. access flap provided on work surface for wire mana gement. return worktop: made of 25mm thick pre-laminated board(plb) of e1-p2 grade and approved shade confirmin g to is-12823-1990, edge banded with matching 2mm thick pvc lipping. modesty pane:made of 18mm thick pre-lamina ted board(plb) of e1-p2 grade and approved shade confirming to is-12823-1990, edge banded with matching 2mm thic k pvc lipping. legs: cube legs are fabricated from ms erw tube of 50mm x 25mm x 1.2 mm thick and 40mm x 40mm x 1.2mm thick ( as peri s:7138). at the top surface of legs, support brackets of 3mm thick hr ( as per is:2062) are weld ed for fixing work shop. these are welded together by argo shiled welding. this welded structure is coated with 50micro n epoxy polyster coating. at the base, a plastic cap with m8 molded insert is fixed, on to which a straight m8 leveler fitte d which allows for adjustment of the height upto 50mm. cross members; cross members in unitized t-2 desk series are made from 50mm x 25mm x 1.2mm thick erw tube ( as per is:7138) these are coated with 50microns epoxy polyster c oating. cross members are assembled by friction fit pdc joinery abd grubscrews. there are always two cross members f or one table. access flap:soft closing access flap is used in unitized t-2 desk series. provision for standard size of 8 mo dule electrical (anchor roma) is offered.access flap is made from alumunium extension, pdc parts made from aluminiu m alloy and plastic parts are made from nylon 6 and wire brush with nylon bristles. power box: power box made with 0. 8mm thick crca (is:513), with switch plate (8 module cutout provision for anchor roma). this is fixed with workshop al ong the depth of access flap position. integrated hinge door storage with drawer: made of 18mm thick pre-laminated t win board of e-1 to p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2mm thick pvc lipping. door is fixed with slide on hinges and handles is providedfor ease of mpening drawer is provided with ebco meta box slide and lock for security. certification: green guard, green pro, indoor air quality, griha certified. make pre ferable: godrej/wipro/damaro ]

State Government

CTN :39481866

06 Mar, 2025 16.18 Lacs

Kangra - Himachal Pradesh

Tender For supply and erection of submersible pumping machinery, providing ,laying, jointing and testing of 250mm dia mserw pipe in rising main stage 1st and 2nd

CTN :39458206

17 Mar, 2025 NA

Shimla - Himachal Pradesh

Tender For supply of boq1 boq1 - the overall size of chair shall be : width 660mm , depth 660mm & height 1250 to 1350 mm. seat size shall be : width 490mm, actual depth520mm, effective depth 430mm and height 475mm to 575mm. width of the back shall be 425mm at bottom & lumbar level 440mm & min480mm at shoulder level. back height shall be 690mm as measured from seat level. the chair shall be supplied with high quality mesh at theback. back outer shall be injection moulded with nylon gf30% material. seat should be made up of foam pre moulded at 55 kg/m3 density &hardness of 25+ 3kgf at 50% deflection conforming to is 3400.the chair shall be supplied with dynaflex two piece back construction withis20d mesh upholstred. back shall be provided with 260mm width, 160mm height and 50mm height adjastable headrest thickness of seatfoam shall be 55 mm. seat shall be upholstered with micro fabric 100% polyster 180 gsm having abrasion > 50000 cycles fire rated fabricconfirming to bs en 1021. plywood used shall be 12mm thick 9 ply hot pressed. the chair should be provided with synchro tilt mechanism(bio snchyro mechansim) allowing 360 degree revolving movement along with height adjustablility & tilt tension. the mechansim shall allowseat to back recline ratio of 2:5. the gas lift used shall be class 4 tested as per ansi bifma standards. height adjustable arms to be proviedoperated through button made of delrin p 500. arm pad material shall be polyurethane with 2mm metal insert. nylon base having pcd of660mm five pronged base made up of pa6, 30% glass filled reincforced with bottom ribbing to be provided. 50mm dia twin castors with pa6material to be provided.tolerance of +/- 5mm to be considered for product sizes i.e length, depth & height and tolerance of 5% to beconsidered in pipe thickness & pipe sizes. , the overall size of chair shall be, total height 855mm, width 620mm,depth 550mm, seat depth 470mm seat width 475mm seat to back height440 and back width shall be 460mm. seating height shall be 460mm.seat should be made up of foam pre moulded at 55 kg/m3 density.hardness of 25+ 3kgf at 50% deflection conforming to is 3400. seat shall be uplhostered with micro fabric 100% polyster 180 gsm abrasion >50000 cycles. no flamming or progressive smoldering within one hour of placement of the cigarettes. fire rated fabric confirming to bs en1021 (match) should be used.the back frame design shall be made from 14g bright steel rod in an exclusive profile for sturdiness andergonomic comfort. the steel frame shall be powder coated to 40-50 microns. the back frame shall offered in special mesh finish in black &grey finish. upholstered with an-70 (black) / an-75 (grey) mesh. special design mesh 100% polyester with 320 gsm. abrasion resistance ->50000 confirming to iso 12947-2. chair shall have fixed armrest with size of 190mm made of with nylon 30% gf.the frame shall be made outof erw tubes with 25 mm diameter with 2.1 mm thickness pipe conforming to is 4923. frame shall be welded by co2 welding process foruniform finish conforming to is 816.frame shall offered with powder coat finish to provide an attractive finish. it shall be in black colour. thepowder coating pre-treatment shall carried out with three in one chemical. after pre-treatment process, the components shall powdercoated for better adhesion of paint. the frames shall powder coated with epoxy polyester powder to the thickness of 40-60 microns as per is101 and oven baked at 180.leg bush shall be provided molded with ppcp.tolerance of +/- 5mm to be considered for product sizes i.elength, depth & height and tolerance of 5% to be considered in pipe thickness & pipe sizes., the overall size of the centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick prelaminated particleboard of approved shade all the edges of discussion surface shall be provided with machine pressed 2mm thick pvc lipping glued withhotmelt eva glue free from any

Central Government/Public Sector

CTN :39455812

06 Mar, 2025 NA

Vellore - Tamil Nadu

Tender For supply of erw tube 1 , erw tube 2 , erw tube 3 , erw tube 4 , erw tube 5 , erw tube 6 , erw tube 7 , erw tube 8 , erw tube 9 , erw tube 10 , erw tube 11 , erw tube 12 , erw tube 13 , erw tube 14 , erw tube 15 , erw tube 16 , erw tube 17 , erw tube 18 , erw tube 19 , erw tube 20 , erw tube 21 , erw tube 22 , erw tube 23 , erw tube 24 , erw tube 25

corporations/Associations/Others

CTN :39374319

04 Mar, 2025 NA

Metturdam - Tamil Nadu

Tender For mtpsi es circle emi re tubing of defective cooler of spare cep motor sl.no 32171 a 404 01 3 with new mild steel erw tubes -200 nos. and hydraulic testing of the cooler

CTN :39408824

03 Mar, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of 10 erw tubes - m.s erw pipes 10" (250 mm) as per is 3589 thickness: 5.4 mm 6mtrs length make: tata/ jindal

State Government

CTN :39435604

04 Mar, 2025 2.42 Crore

Sirmaur - Himachal Pradesh

Tender For sh - supply and erection of pumping machinary with allied accessories at booster, 1st and 2nd stage, providing, laying, jointing of mserw pipe line in rising main at 1st and 2nd stage, laying and jointing gms pipe line in rising main at booster 1st

Erw Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors