Get complete information related to latest Exchangeable Vane Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Exchangeable Vane Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Exchangeable Vane Tenders.
Tender For auction sale of rolling stock - pl no.98111061, condemned and over aged bg-8 wheeler icf coach 2 nos. with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc items. 1}coach no. special repair cn 046245 (year built 2004), ds-8 no. 334714 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046245 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] center pivot 2 nos. 5] bogie mounted brake cylinder 4 nos, 6] distributer valve complete full set 1 set, 7] wearing piece( bronze) and plate 4 nos each, 8] auxiliary reservoir 200 l. 1 no 9] main doors -4 nos 10] water tank-4 nos 11] cut off angle cock -4 nos 12] dirt collector- 2 nos 13] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.09.09.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]eml- 4 nos 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery with tray-19 nos. 8] battery tray- 4 nos.9] rotary switch with panel board- 1 no 10] alternator to regulator wire ( copper ) -1 kg 11] one alternator(4.5 kw) & one set of axle pulley ( with bogie), 2} coach no. special repair cn 046213, (year built 2004) ds-8 no. 334715 dt 31.03.26, mechanical rc items as per sse/c&w/srr letter no.s-98/coach condemnation/rc items dt.04-11-2025 , coach no.srcn 046213 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling complete set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinders- 4 nos 5] distributer valve complete full set 1 set, 6] wearing piece( bronze) and plate 4 nos each, 7] auxiliary reservoir 200 l. 1 no 8] main doors -4 nos 9] water tank-4 nos 10] cut off angle cock -4 nos 11] dirt collector- 2 nos 12] non return valve(fp)- 1 no, electrical rc items as per sse/electrical/srr letter no.elg/srr/6a dt.25.07.25. 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w lamp -8 nos 4]5w westibal 2 nos 5]eml- 4 nos 6]mobile charger socket-18 nos. 7] regulator 4.5 kw- 1 no 8]vrla battery with tray-19 nos. 9] battery tray- 4 nos.10] rotary switch with panel board- 1 no 11] alternator to regulator wire ( copper ) -1 kg, custodian sse/ c&w/ shoranur.
Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti
Tender For tender for supply of power control card for 75kw danfoss make vfd, code no 13280306. 3 power card j7 for 75kw danfoss make vfd, code no 13280307 rfi auxiliary card j7 for 75kw danfoss make vfd, code no 13280308 3 igbt module with gate drive cable j7 for 75kw danfoss make vfd, code no 13280310 3 dc capacitor for 75kw danfoss make vfd, code no 13280312 fan 120 * 38 lp21 for frame size j7 for 75kw danfoss make vfd, code no 13280313 vlt control panel lcp 21 for 75kw danfoss make 3 vfd, code no 13280254 control cassette, profinet (new design) for 75kw danfoss make vfd, code no 13282183 3 danfoss 2.2kw vfd model: fc- 360h2k2t4e20h2bxcdxxsxxxxalbx, code no 134f3013 as per attached specification sheet. danfoss 4kw vfd model: fc- 360h4kot4e20h2bxcdxxsxxxxaxbx, code no 134f2977 as per attached specification sheet.
Tender For supply of electrician screwdriver thin stem insulated handle , electrician screwdriver thin stem insulated handle , knife double bladed electrician , neon tester , blow lamp brass , crimping tool , wire cutter and stripper , copper bit soldering iron , de soldering gun , contactor and auxiliary contacts , limit switch , rotary switch , relay cut out relays reverse current relays over current relays under voltage relays , pin type shackle type egg type and suspension type insulators , hydrometer , portable electric drill machine , load bank lamp or heater type , laboratory type induction coil , out side micrometer , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb , rccb , fuses , rheostat sliding type , capacitors , various lamps , bus bar with brackets , rubber mat , electrician helmet , safety belt , ohm meter series type and shunt type portable box type , digital multi meter , a c voltmeter m i analog portable box type housed in bakelite case , milli voltmeter centre zero analog portable box type housed in bakelite case , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi analog portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a c energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester or clamp meter , megger , 3 point d c starter , 4 point d c starter , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering iron , discrete component trainer , linear i c trainer , digital i c trainer , electric induction plate , electric kettle , electric iron , immersion heater , a c ceiling fan and ac table fan , geyser storage type , mixture and grinder , washing machine semi-automatic , motor pump set , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , ink jet or laser printer , dc compound motor with starter and switch , thyristor igbt controlled d.c. motor drive with tacho generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , used dc generators series shunt and compound type for overhauling practice , motorised bench grinder , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , portable double telescopic ladder , 3 ph variac , rotary hammer drill 1 ph , lcr meter
Tender For annual maintenance contract for gearbox and auxiliary maintenance of cooling tower fan, maintenance of various pumps and clarifiers under jurisdiction of wtp-i on as & when required basis
Tender For tender for supply of ducting - pvc ducting for auxiliary fan as per tech specs pdf attached , as per tech specs pdf attached , as per tech specs pdf attached , as per tech specs pdf attached , as per tech specs pdf attached
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.
Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.