Latest fabricated item scrap Tenders | Government fabricated item scrap Tenders

Central Government/Public Sector

CTN :45166276

20 May, 2026 NA

Mumbai - Maharashtra

Tender For supply and testing with end termination, intermediate termination and cord-end termination of over current protection system along with full end termination along with residual current protection operated on 230v ac supply with load current 16a, 2 pole conforming to is 12640 (part 2) :2008 iec61009-1:1996 or latest with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 16a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking 1 resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16 with earth leakage protection of 30 ma, with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination, manufactured out of ec grade aluminium extruded extension tubes of minimum purity 99.5% and conductivity not less than 60% iacs, designed and fabricated strictly in accordance with is:5082 specifications, duly conforming in all respects to is:2121 part-i & ii and is:2544 with provision for sustaining continuous operating temperature up to 120 degree c under specified service conditions [ warranty period: 30 months after the date of delivery ]

CTN :45175749

23 May, 2026 NA

Kamrup - Assam

Tender For supply of be mri safedot , ao type external fixator set for tibia consisting of 2 x 300 mm long stainless steel tube 11 mm diacomma 6 x 5mm self drilling or tapping shanz screwscomma 12 x single pin to , ao type external fixator set for femur consisting of 2 x 400 mm long stainless steel tube 11 mm diacomma 6 x 5mm self drilling or tapping stainless steel shanz screws 12 x single , universal mini external stabilization system set completecomma jesscomma for ctev large , kirschner wirecomma 250 mm long x 1dot 0 mm diacomma both ends trocar point , kirschner wire 250 mm long x 1dot 5 mm diacomma both ends trocar point , kirschner wire 250 mm long x 2dot 0 mm diacomma both ends trocar point , kirschner wirecomma smoothcomma length 150 mm with double trocar tip 1dot 5 mm to 3 mm at 0dot 5 mm incrementsdot , kirschner wire 15 cm long x 1dot 5 mm diacomma both ends trocar point , kirschner wire 15cm x 2mmcomma both ends trocar , drill bit dia 3dot 5 mmcomma long , drill bit dia 4dot 5 mmcomma long , tibia nailing system expert type titanium consisting of expert tibial nail 1 noscomma locking bolt 5 noscomma endcap 1noscomma size dash9 , soft roll compressed ortho cotton 10 cm , saw blades for conmed saw system , 3dot 5mm distal tibial medial locking plates for rightslash left at least 6 holes in head and 4 dash 12 hole shaft with 8 x locking and cortical screws complete construct titanium , trauma drape pack for upper limb consisting of one impervious u drapecomma one impervious o drapecomma 4 x large sheetscomma two cling films and anaesthesia , ortho surgical gown sterilecomma disposable waterproof wrap around type mediumcomma largecomma extra large dot aami 4 , trauma drape pack lower limb consisting of one impervious u drapecomma one impervious o drapecomma 4 x large sheetscomma two cling films and anaesthesia isolation s , high viscosity bone cement with antibiotic dash40 gm , ultaporus acetabular shell with compitable crosslinked polyethylene liner with 2 screws size 44slash 46 , primary uncemented proximally coated hip stem collarlesscomma taper wedge titanium stem with slim ap dimension proximally coated available in standard and extended , primary cemented polished taper hip system consisting of polised taper femoral stem with centralizercomma compatible metallic femoral head and polyethylene , biolox delta ceramic liner and gription coated acetabular shell for hip reconstruction , primary uncemented fully coated hip stem collarlesscomma reduced lateral shoulder taper wedge titanium stem with compatible biolox delta ceramic head size 1slash , 2dot 4slash 2dot 7 mm volar distal radius locking plate with 5 holes in horizontalslash oblique distal part in a single row and 2 holes in longitudinal part of plate with 5 x , titanium elastic nails 1dot 5 mm dash 4dot 5 mm dia , 3dot 5mm t dashplate buttress plate comma right angledcomma 4 transverse and 2 dash 7holes along long axis with self tapping cortical screws complete construct titanium , supra condylar nail surgical grade titanium complete constructdot , herbert screw size 2dot 4mm length 18 dash 24 mm dot full quality assurance titanium , interlocking cannulated anatomical femoral nails trochantric entry 5 dash7 degrees proximal offset right dot proximal locking options dash gt to lt locking 2 titanum , ao pattern 4dot 5 mm titanium lcp narrow 8 dash 14 holes with locking and cortical screws complete construct , ao pattern locking compression plates 6 dash14 holes 3dot 5mm with locking and cortical screws complete //bid details 2 / 42 constructdot titanium , ao pattern 1slash 3rd tubular platescomma 3dot 5mm comma 8 holes comma 316 lvm stainless steel with compatible 6 x3dot 5mm cortical self tapping and 2x3dot 5mm , ao pattern 1slash 3rd tubular platescomma 3dot 5mm comma 10 holes comma 316 lvm stainless steel with compatible 6 x3dot 5mm cortical self tapping and 2x3dot 5mm titanium , antirotation proximal femoral nailing system consisting of antirotation proximal femoral

Central Government/Public Sector

CTN :45183952

08 Jun, 2026 NA

Ajmer - Rajasthan

Tender For m-type stainless steel tubular heater elements of 400 watts, 83v, without fins, to be used with 3-phase, 415v supply, suitable for use in rmpu of lhb type ac coaches, as per sidwal make part no. 075-1020, conforming to rdso specification no. rdso/pe/spec/ac/0061-2005 (rev-1). accepted make of heating element: m/s daspass & m/s theeta or any other rdso-approved make. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

CTN :45140333

19 May, 2026 NA

Delhi - Delhi

Tender For supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

CTN :45121842

27 May, 2026 NA

Silvassa - Gujarat

Tender For procurement of electrical material for maintenance and repairing of 66/11kv and 220/66kv substation of dnhddpcl. - supplying bolted connections (bs type) hrc fuse link capable to withstand 80ka, 415 v confirms to i.s. 13703 for following current capacity. make ftc/l&t/havells(i) hrc fuse link -2 amp, (ii) hrc fuse link -4 amp, (iii) hrc fuse link -6 amp, (iv) hrc fuse link -10 amp, (v) hrc fuse link -20 amp, supplying bolted connections (bs type) hrc fuse base suitable for 2 amp. to 20 amp. 80 ka, 415 v hrc bolted fuse link. as per is/iec 60269 part-ii, supplying of led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513, volt 160v to 270v, (a) tube light with integral driver 20 watts, 4 feet make: philips / bajaj / crompton, supplying of approved make single phase industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following [a] 305 mm dia 900 rpm make: bajaj/hevells/ crompton /almonard, supplying of approved make ceiling fan with double ball bearing isi mark with condenser a.c. 23ov. 50 c/s.1200 mm. sweepmake: bajaj/hevells/crompton /usha/orient , supplying of approved make pedestal fan a.c. 230v. 50 cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator, & standard lead flexible wires and plug top. make: bajaj/hevells/ crompton /usha/orient, supply of tnc switch with lock for 66/11 kv panel, supply of petroleum jelly for sub-station equipments protection (1 kg pack), indicating lamp led type, mount hole-22 mm, 110 v dc with back panel lock nut fitting.red- 100 nosyellow-100 nosgreen-100 nosblue-100 noswhite-100 nos, providing crimping type cable terminals (lugs) conforming to is of following types and sizes. (aluminium tubular terminals long barrel)) .240 sq. mm, providing crimping type cable terminals (lugs) conforming to is of following types and sizes. (aluminium tubular terminals long barrel)) .300 sq. mm, supply of telescopic earth / discharge rod up to and included 66 kv, 72.5 kv tested manufacture in fully automatic pultrusion plant having strong electrical & mechanical strength. as per specification.a. total section 4 sectionb. assembled height 18 feetmake :- biemco or equivalent, supply of shroud for 11 kv panel, 12 kv , jyoti make (as per approved sample), supply of jaw contact female, 11 kv, 1600 amp. jyoti make( as per approved sample), supply of tripping coil, 110 v dc for 11 kv panel (suitable for abb & jyoti make panel), supply of closing coil, 110 v dc for 11 kv panel (suitable for abb & jyoti make panel), supply of natural rubber latex seamless hand gloves for electrical purpose tested as per is 4770-1991 having test potential of 33000 volts and maximum working potential 11000 volts of size 380 mm crystal brand., supply of rechargeable torch with led bulb make: eveready/hevells/ wipro

CTN :45102528

21 May, 2026 NA

Amla - Madhya Pradesh

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)

State Government

CTN :44949434

15 May, 2026 NA

Sundernagar - Himachal Pradesh

Tender For corrigendum : supply of tubular fluorescent lamps conforming to is 2418 (q3) , ballasts for fluorescent lamps as per is 1534 (part 1) (q4)

Central Government/Public Sector

CTN :45049924

12 May, 2026 NA

Mumbai - Maharashtra

Tender For supply and end termination of over current protection system with residual current of 30 ma along with full end termination suitable for office wiring along with residual current protection operated on 190-240v v ac supply with load current 32 a confirming to id 12640 (part 2): 2008 iec61009-1: 1996 or latest with copper terminal connector suitable for 2.5 dia aluminium tubular busbar for 32a copper palm 1 copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is:617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 32. [ warranty period: 30 months after the date of delivery ]

CTN :44996521

30 Apr, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , lighting pole or post and hardware - tubular street light poles (v2) (q3)

Central Government/Public Sector

CTN :44959229

18 May, 2026 NA

Nagaur - Rajasthan

Tender For supply of regid bimetallic terminal connector suitable for 50 mm dia, alluminium tubular bus bar to terminal pad of 25 kv isolater/ct conforming to rdsos drg.no.re/33/p/11090 oras per drawing no. eti/psi/p/11090 or latest consisting of part no.11091 & 11092" complete with connector body and clamping piece. [ warranty period: 30 months after the date of delivery ]

Fabricated Item Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector