Latest fabricated structure Tenders | Government fabricated structure Tenders

Central Government/Public Sector

CTN :41247205

19 Aug, 2025 NA

Khurda - Odisha

Tender For supply of teaching lab furniture - lab furniture , steel almirah , student chair having metal frame with back support , faculty or staff chair , faculty or staff table

State Government

CTN :41219129

02 Aug, 2025 12.68 Lacs

Delhi - Delhi

Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts

State Government

CTN :41269981

20 Aug, 2025 13.87 Lacs

Bankura - West Bengal

Tender For modification of bus arrangement to 1.5 inch pipe bus in fabricated structure at barjora 33/11 kv sub station for the proposed switching sub station at wbidc industrial park barjora under bankura division

Corporations And Associations And Others

CTN :41255186

07 Aug, 2025 6.45 Lacs

Delhi - Delhi

Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer

CTN :41194926

04 Aug, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spares - q fuel cut-off valve , breather assy , switch , cyl head asy less valve , clip assy , clamp , clamp , pre filter assy , capsule , full stop , throttle screw , governor assy. , element , oil cooler , oil cooler assy , snap ring , body , adapter , plug , tube , tube , outlet , valve , oil pump , spring oil pump , shim , oil pump , snap ring , retainer oil pump , strainer , muffler , ring , bolt , bolt , bolt , flange , washer , band , clamp , bracket , bracket , brackt , elbow , o ring , spill hose ( 5 pieces) , banjo bolt , clip , nut retaining , spill tube , spill tube , packing , nipple , tube , bolt , element , bracket , bracket , plate , case , valve assy , plug , plug , pin piston , bolt , connecting rod , dowel pin , snap ring , bearing ball , bearing case , bearing ball , nut , snap ring , bearing ball , case bearing , dowel ring , shaft p.t.o , shaft spline , shim assy , snap ring , snap ring , snap ring , bearing ball , joint bolt , tube , clip , flange , o ring , over flow valve , shim , spacer ring , compressor spring , hexagon nut , hexagon nut , plain washer , camshaft , compression spring , flat seal ring , micro encapsulated screw , roller , screw plug , flange bush , screw plug , screw plug positive , shim plate 1.15 mm , shim plate 0.40 mm , shim plate 0.45 mm , shim plate 0.50 mm , shim plate 0.55 mm , shim plate 0.60 mm , shim plate 0.65 mm , shim plate 0.70 mm , shim plate 0.75 mm , shim plate 0.80 mm , shim plate 0.85 mm , shim plate 0.90 mm , shim plate 0.95 mm , shim plate 1.00 mm , shim plate 1.05 mm , shim plate 1.10 mm , shim plate 1.20 mm , shim plate 1.30 mm , shim plate 1.35 mm , shim plate 1.40 mm , shim plate 1.45 mm , shim plate 1.50 mm , shim plate1.25 mm , support ring , gasket , arm. rocker assy (exhaust) , spring , cover , cylinder head , cover , cylinder head , bolt , bolt , housing rocker , screw , bolt , 45 long , bushing , ce frame , insulator , insulator , insulator , switch , armature , field coil , housing , drive , screw-pole shoe , bush plate asm , drive assy , plunger , solenoidswitch (37s) , gasket , nut , lever gear shift , tube , screw , shim assy , gear driven 2nd , nut , bearing taper roller , plate , band assy , shaft , seat grease filler , ring back up , bushing , cylinder , plug grease discharge , seat , carrier roller assy , track roller assy df , track roller assy sf , bushing , board floor , board floor , board floor , board floor , board floor , board floor , seat assy , ring snap , key , ring , lever , joint , plate , bolt , pin , trunnion assy , kit wire harness , cable tachohourmeter , switch temperature , horn switch , terminal positive , terminal negative , ammeter , water temp gauge , tacho hour meter , dash lamp , eng oil pr. gauge , lamp indicator , lamp indicator eop , lamp indicator ewt , switch light , instrument panel

CTN :41237783

04 Aug, 2025 46.73 Lacs

Delhi - Delhi

Tender For annual repair & maintenance of dr. spm swimming pool complex, new delhi during 2025-26 (sh: painting with epoxy paint over structural steel straircase and frame of facade along with structural steel frame provided for horizontal support of shear walls and providing and fixing toughened glass (igus) panels over existing structural glazing at dr. spmspc, new delhi)subwork/packages:(sh: painting with epoxy paint over structural steel staircase and frame of facade along with structural steel frame provided for horizontal support of shear walls and providing and fixing toughened glass (igus) panels over existing structural glazing at dr. spmspc, new delhi)

CTN :41203405

14 Aug, 2025 NA

Kamorta - Andaman And Nicobar Islands

Tender For supply of materials/items for mgnrega works nancowry block for fy-2025-26 - rate for accssible ares (kamorta & nancowry islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow block 40x15x20 cms, cement concrete hollow block 40x10x20 cms, m.s flat various size, m.s angle various size, tmt steel bars various size, binding wire good quality, nailsvarious size, nut & bolt various size, j hook various size, coach screw with cap washer 2 , self type screw various sizes as per requirement, ply wood anti-termite (commercial), approved/ reputed brand. 12 mm thick, ply wood water proof & factory painted (marine), approved/ reputed brand. 19 mm thick, pre painted galvanised (ppgi) roofing sheet 9 feet, ppgi plain sheet 2 feet width, cement primer (reputed brand.) good quality, wood primer (reputed brand.) good quality, oil bound distemper (reputed brand.) good quality, synthetic enamel paint (reputed brand) good quality, painting brush (amar) various sizes, sliding bolt make classic 300x16mm, window handles (anodized) various sizes as per requirement, iron hinges various sizes as per requirement, tower bolt (anodized) various sizes as per requirement, w/c pan complete set make hindustan or any other reputed company indian type (460x440) mm, pvc pipe make hindustan 100 mm, pvc pipe 3 inch, thinner make sheenlac good quality, steel hand saw for wood good quality, saw file (triangular) 4 inch, augur 3/8 inch, wooden shuttering with propping good quality wood, g.i. wire mesh of dia. 4mm, pvc coated to achieve outer dia. not less than 5mm in required colour, shade and height. (reputed brand) mesh size 100x100mm, pre cast rcc post for fencing top width-12cm, bottom width-15cm, height-1.70m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe. inner dia-1.00m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe inner dia-0.50m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc ring for c/o ring well inner dia-2.0m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, plump bob good quality, sledge hammer good quality, ball peen hammer good quality, try square good quality, trowel good quality, mixing pan good quality, pvc cowl 100mm, pvc door frame make rajshree 50x47mm wide 5mm thick, pvc door 30x50mm wide 5mm thick and 75mm wide pvc sheets for top rail, preparation & installation of citizen information board fully metallic board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully metallic board of (2x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully wooden board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix proper footing support., mooram good quality, epoxy paint standard, red oxide paint standard, welding charges arc welding, mixer machine (on hire) 10/7 cubic feet or 1 bag capacity, hiring of road roller8 tonne, precast rcc circular slab of 1.44 sqm,thickness-5 cm, main bars-8 mm dia, distribution bars-8mm dia @100mm c/c spacing, rcc mix-1:1.5:3, rate for inaccssible areas (katchal, teressa & chowra islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow b

CTN :40966269

05 Aug, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of root blower spares-quotation-called for t.l. blower , common base frame , motor slide rail , motor , motor pulley , blower pulley , v-belt , v-belt guard , discharge silencer , interconnecting pipe line , suction silencer , suction filter , pressure gauge with isolation valve & syphon , safety valve , (spring loaded type) , non return valve , foundation bolt , anti-vibration pad , gasket , support for discharge , acoustic hood , exhaust fan , anchor bolts with nuts

Central Government/Public Sector

CTN :41100165

04 Aug, 2025 NA

Katipala - Karnataka

Tender For corrigendum : tender for supply of 3000025463 fume hoods spares : : - temperature indicator with sensor for godrej make fume hood , auto modular fire extinguisher 2 kg for godrej make godrej make fume hood , frame for fire extinguisher mounting support for godrej make fume hood , hooter with flasher with plug for godrej make godrej make fume hood , cable 3core x 1sqmm 12mt for for godrej make godrej make fume hood , installation of temp.sensor , fire extinguisher , hooter for godrej make fume hood.