Latest fabricated structure Tenders | Government fabricated structure Tenders

State Government

CTN :38825986

25 Feb, 2025 1.57 Crore

Bagicha - Chhattisgarh

Tender For corrigendum : construction, testing and commissioning of steel fabricated structure 15 nos. of 10 kl capacity staging 9 mtr. including construction of suitable r.c.c. valve chamber in village . providing, laying, jointing, interconnection, testing and commissioning of 63 mm dia hdpe class 10 kg/sqcm of 1350 mtr. valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity three/single phase, 50 hz, 415v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with control panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc 15 nos. as required as per specifications but excluding pipe, ss/nylonwire rope and connection cable including verification of tube well yield. & electric connection from cseb, construction of brick masonry switch room of size 1.50*1.50*3.00 mtr (15 nos), providing 0 no functional household tap connection (f.h.t.c) (pe-al-pe pipe 0 mtr) in individual households and government instiution etc.drilling of 150 mm dia 130 m deep ordinary tube well 15 nos. complete with trial run operation & maintanance for 03 months under single village piped water supply scheme under jal jeevan mission for village bhadu, bahora, marangi, samarbar, sanna & gurmhakona in block bagicha district jashpur.

CTN :39129276

19 Feb, 2025 NA

Solan - Himachal Pradesh

Tender For supply of imported movable climbing holds , climbing wall , pre- fabricated structure , dynamic climbing rope , seat harness , screw carabiners , descender , rappelling mittens , slithering rope

Central Government/Public Sector

CTN :39113896

18 Feb, 2025 71.93 Lacs

Jharsuguda - Odisha

Tender For procurement of spares of 33 kv mocb mei make on pac basis - lower housing , part no. 20115064. , lower housing cover , part no. 20115065. , crub screws , part no. 20115133. , shaft , part no. 20115264. , gear (pinton of int. redn) , part no. 20115271. , pinion for motor , part no. 20115291. , key for motor , part no. 20115292. , catch lever , part no. 20115334. , l.bolts with nuts and washers , part no. 20115343. , spring tensioning , part no. 20115411. , end clamp l.h. , part no. 20115424. , end clamp r.h. , part no. 20115425. , releasing cam , part no. 20115449. , reset spring for mechanism assembly , part no. 20115467. , bearing , part no. 20415082. , central nut , part no. 20415143. , lower terminal , part no. 20415134. , ratchet , part no. 20415272. , stop for lower housing cover , part no. 20615068. , pole gasket (old) , part no. 20615086. , oil seal , part no. 20615083. , lowe insulator gasket(old) , part no. 20615089. , oil cap gasket , part no. 20615149. , oil level indicator gasket(oil type t-52/2e) , part no. 20615639. , moving contact rod assembly , part no. 10015025. , moving contact tip assembly , part no. 10015029. , surge monitor / counter , part no. 00111015. , upper fixed contact assembly , part no. 10015032. , lower fixed contact assembly , part no. 10015039. , upper insulator with flange (old) , part no. 10015040. , oil chamber assembly complete (old) , part no. 10015041. , closing spring assy 10015066 , part no. 10015066. , dual lever , part no. 10015072. , reduction gear assembly , part no. 10015076. , closing coil assembly , part no. 10015089. , tripping coil 48v dc , part no. 10042012. , catch lever assly. , part no. 10015094. , motor 230v ac phase1 , (1/5 hp) 10015082 , part no. 10015082. , drum switch connecting link , part no. 10015144. , oil level indictor for old type t-52/2e , part no. 10011220. , drum switch assy 13 way , part no. 10015306. , complete set of baffles with tubular sleeve partition , part no. 01500001. , resetting spring assy with wire rope etc , part no. 01500003. , drain cock 3/8inch bsp , part no. 01500007. , operation counter , part no. 01520008. , terminal connector set with accessories , part no. 01500010. , curent transformer 33kv outdoor type , part no. 80006053. , control cable 16 core , 1 length of 50mtr , part no. 80006052. , potential transformer , part no. 80006054. , closing coil 48 v dc , part no. 10042042. , clutch catcher assy.10015092 , part no. 10015092. , rupturing chamber assy with lower termin , part no. 10015031. , rupturing chamber cylinder , part no. 20615121. , spring for catch lever , part no. 20115344. , spring for trip catch assy , part no. 20115444. , mechanism assembly , part no. 10050060. , crank shaft gaskets with accessories , part no. 01500002. , upper terminal (old) , part no. 20415142. , spring for lock release spring , part no. 20115466. , lower housing cover gasket , part no. 20615070. , end of travel limit switch assembly (new) , part no. 10015311. , tripping coil , part no. 01500004. , closing coil 36v dc , part no. 01500005. , aux contactor 4no+4no+1nc , part no. 80006025. , amperemeter , part no. 80006041. , voltmeter , part no. 80006042. , voltmeter selector switch , part no. 80006044. , push switch , part no. 80006047. , control cable 4 core , 1 length of 50 mtr. , part no. 80006050. , power pack unit , part no. 80006055.

CTN :39055500

12 Feb, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of dglp re 29 - surgical mask 3 ply , durapore , cannula iv size 26 g , knee cap l , knee cap m , cannula iv with injection port and wings size 16g , cannula iv with injection port and wings size 18g , cannula iv with injection port and wings size 20g , disposable plastic infusion set for iv fluids presterilises pyrogen free complete with airline and nylone filter alongwith airvent , nasal cannula adult , abdominal binder 10 , bandage dvt stocking small , bandage dvt stocking medium , bandage dvt stocking large , dressing shell compressed , gauze surgical open wove unmedicated 60 cm wide length 18 mtr , mask for nebuliser adult , disposable nebulizer set with mask paediatric , condom catheter medium size , gauze surgical open wove unmedicated 60 cm x 3 metres packet , rom knee brace assorted should be made of 3 layered soft foam material with patellar open design should have strong durable aluminum , rom elbow brace , ao type universal extranal fixator set with 2 tube to tube clamp with 6 universal clamp single pin 2 univeral clampdouble pinwith tubular rods , osteoarthritis knee brace , neoprine pcl brace , inj denosumab 60 mg , saw blade with complatable with maman drill hand piece , respirometer , finger exercosed gel ball , cervical pillow , cannulated screw driver for headless compression screw 2point7 3mm , bilateral knee drape set- made of impermeable control plus fabric with triple layer two large water proof trolley cover of size 160cm , radiofrequency probes 90 degree with suction compatible with mitek electrode system , wire kirschner with drill head ended 25 cm long x 1point2 mm dia stainless steel , ethibond ployester no 5 sterile , sterile disposable knee arthroscopy drapes pack with fluid collection bag with suction port and tube holders water proof , triclosan coated braided dyed polyglactin for orthopaedic surgery size no 1 90cm long thread with taper cut heavy needle usfda approved , triclosan coated braided dyed polyglactin for orthopaedic surgery size no 2 90cm long thread with taper cut heavy needle usfda approved , total knee replacement modular posterio stabilised cr for components see appx , total knee replacement modular posterio stabilised high flex for components see appx , simplex cmw 3 low viscosity cement , pmma gentamycin beads of 60 , granules , stockinet 5point08 cm bleached , stockinette 10point16 cm bleached , methyl prednisolone sodium succinate inj 80 mg , aquacel ag surgical 9 cm x 30 cm x 3point5 in x 12 in , mobile bearing unicondylar knee system with 1 co cr femoral component 2 mobile bearing congruent poly insert 3 tibial , flipcutter 5 to13 mm and 50 to 130 degree for all inside acl reconstruction , short flipcutters 5 to 12 mm and 50 to120 degree for all inside acl reconstruction , titanium femur neck system with one hole plate one bolt and one antirotation screw wwhich pass through bolt with 5 , expert retrograde antegrade femoral nail system with 9point0mm to 12 mm dia and 160 480 mm length with 1500 mm , atfl kit , diclofenac diethylamine 4point64 percentage w v only topical solution with qps technology 30ml , locking distal humerus dual plate system with variable locking opton with plus 150 off axis angulation as lateral plate , trochanteric femur nail with inbuilt set screw capable of allowing cannulated screws and blade with same hole in proximal part , cross linked high molecular weight sodium hyaluronate for intra articular viscosupplementation 30 to 50 mg in pfs of 2 to 6 ml bid details/ 2 / 52

State Government

CTN :39075115

31 Jan, 2025 21.14 Lacs

Jammu - Jammu And Kashmir

Tender For upgradation of seed multiplication farm chakroi by way of construction of pre fabricated structure (under nabard)

State Government

CTN :38773044

30 Jan, 2025 NA

Sundernagar - Himachal Pradesh

Tender For corrigendum : supply of fluorescent lamps (fluorescent tubular lamps) as per is 2418 (part 1, 2, 3 and 4) (q3) , ballasts for fluorescent lamps as per is 1534 (part 1) (q4)

corporations/Associations/Others

CTN :39028788

01 Feb, 2025 NA

Nagpur - Maharashtra

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2)

corporations/Associations/Others

CTN :39028806

01 Feb, 2025 NA

Nagpur - Maharashtra

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2)

corporations/Associations/Others

CTN :39028874

31 Jan, 2025 NA

Nagpur - Maharashtra

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2)

corporations/Associations/Others

CTN :39028899

31 Jan, 2025 NA

Nagpur - Maharashtra

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2)

Fabricated Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors