Latest false ceiling tile Tenders | Government false ceiling tile Tenders

CTN :39430408

14 Mar, 2025 NA

Gaya - Bihar

Tender For supply of repair of auditorium shed , false ceiling tiles replacement , provision of extension of shed , outdoor counter extension

State Government

CTN :39340889

05 Mar, 2025 5.00 Lacs

Baramulla - Jammu And Kashmir

Tender For annual maintainence of assets including wages outsourced through stage contract. - providing and fixing orginal raitwood penalling ,including 12mm ply backing, complete with necessary screws complete job as per the directions of engineer in charge., providing and fixing kd kanas (2.5x1.5) with necessary screws complete job as per the directions of engineer in charge., providing and fixing specified board medium density exterior grade (grade i) to frame, backing or studding with screws etc. complete (frames, backing or studding to be paid separately) : pre-laminated with decorative lamination on both sides mdf board conforming to is:14587 18 mm, providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.in all colours, shades, except white, ivory, fume red brown, p/f 10 litres without fittings low level cistern (vitreous china), providing and fixing 50 litre geyser along with connection pipes and all neccasry fittings (venus, jaquar,racold ), providing and fixing 15 mm nominal bore c.p. brass bib cock of approved quality conforming to is : 8931, providing and fixing 15 mm nominal bore c.p. brass angle valve for basin mixer and geyser points of approved make conforming to is : 8931, providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls whereverrequired.18.10.1 white glazed fire clay kitchen sink of size 600x450x250 mm, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer-in-charge. 19.3.1 internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 19.3.1.1 15mm nominal outer dia pipes., providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank

State Government

CTN :39410556

04 Mar, 2025 30.00 Lacs

Tonk - Rajasthan

Tender For construction material work in gram panchayat madolai-, ghadla kankar jhajra, , mortar - mud / mortar, , lime of bud bhat for masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone and brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit of mathar (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand broken stone aggregate (wides cart 1/11), , 90-45mm. hand broken stone aggregate (cut voids 1/11), , quarry rubbish (cut voids 1/6), , gravel (cut voids 1/6), , conker (cut voids 1/6), , binding material (pi 4-6) (cut voids 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material(3-4" thick & length and width 1-2"), , sandstone(dpc,sill,coping,lintel,tand,almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 901 to 2300 sq. cm., , upto 900 sq.cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , 901 to 2300 sq. cm, , up to 100 sq cm, , more than 2300 sq.cm, , stone threshold, , single pattam size 100 x 75 mm., , double pattam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles / blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core, , cable isi marked, , 1.50 sq mm., , poojaar's, , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single door), , structural steel, , iron (for tor steel fe 415/500 reinforcement), , winding wire 18 gauge, , iron guard, , angle iron square rebar leaf angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , cement concrete poles for wire fencing length 2.5 m average, , size 0.10*0.15 meter 4mm diameter high tension steer wire 8 nos, , including, , 150 cm high fencing of precast r.c posts of 15cm*15cm tapered to10*10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30*30*45cm) corner and every tenth posts to be strutted with same r.c. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with g.i. staples including earth work in excavation etc. complet, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , glass, , 3 mm thick glass, , 5 mm thick glass,

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Corporations And Associations And Others

CTN :39387668

25 Feb, 2025 1.68 Lacs

Faridabad - Haryana

Tender For hew 22 flush dnr shutter, cupboard, shutters, glazed wall tiles, apex, distemper, enamel paint, plaster , brick work etc. and all other works contingent thereto. ch to annual maintenance of staff quarters in sector 46 faridabad

Central Government/Public Sector

CTN :39087505

22 Feb, 2025 45.00 Lacs

Vadodara - Gujarat

Tender For corrigendum : repair to joinery and other associated works roof treatment false ceiling tiles flooring at makarpura at af stn vadodara

CTN :39322215

05 Mar, 2025 NA

Imphal - Manipur

Tender For supply of maintanance stores - ppgi profiled sheet , mild steel corrugated galvanised cgi sheet , plywood commercial bwr grade , acrylic sheet 3mm thick , m seal 100 gm , adhesive for wood fevicol , painting brush 100mm , painting brush 75mm , painting brush 50mm , synthetic enamel paint high gloss , tarpentine oil , wooden primer asian , puf gun machine , self tapping screws , mild steel wire nails assorted size , emery cloth 100mm wide , mcb 10 amp sp , mcb 32 amp dp , gang box 4 way , mcb 40 amp sp , switch piano 6 amp 240v , bed switch 5 amp , change over switch 32 amp , pvc sheathed unarmoured stranded copper conductor cable , pvc insulated sheathed unarmoured cable 10sqmm twin core , pvc insulated sheathed unarmoured cable 6sqmm twin core , pvc insulated sheathed unarmoured cable 25sqmm 4 core , flexible cable twin twisted , condenser 2.5 mfd for ceiling fan , wall mounted fan 400mm sweep , fan regulator electronic dimmer type , led batten surface 4 feet long 18w , led bulb 11w 220 240 volt , led bulb 13w 220 240 volt , pvc casing capping 25mm , thimble alumnium 35mm , insulation tape 3 oblic 8 inch wide , pvc flexible pipe 25mm dia , switch socket combination 15 amp 240v , switch socket combination 6 amp 240v , socket 3 oblic 5 pin 5 amp 240v , socket 3 oblic 6 pin 5 oblic 15 amp 240v , ordinary portland cement 43 grade , coarse sand dimapur sand , coarse aggregate crushed stone , vitrified ceramic coloured tiles , bricks sub class b old size , glazed ceramic coloured tiles , machine pressed precast cocrete interlocking paver block , oil filter genr set 40 kva , fuel filter genr set 40 kva , air cleaner filter genr set 40kva , fan belt genr set 40 kva , engine mounting pad genr set 40 kva , fuel pipe genr set 40 kva , tapped gaskit genr set 40 kva , injector genr set 40 kva , cyl head gasket genr set 40 kva , mcb 63 amp dp 240 volts , oil filter genr set 58 point 5 kva , fuel filter genr set 58 point 5 kva , air filter genr set 58 point 5 kva , fan belt genr set 58 point 5 kva , engine mounting pad genr set 58 point 5 kva , fuel pipe genr set 58 point 5 kva , tapped gaskit genr set 58 point 5 kva , injector genr set 58 point 5 kva , cyl head gasket genr set 58 point 5 kva

Central Government/Public Sector

CTN :39262054

22 Feb, 2025 11.34 Lacs

Gurgaon - Haryana

Tender For rovn of glazed tiles covered platform, flame proof electrical fittings and anti sulphuric tiling in ct room of bcr and improvement of aftl lab extn and provn of auto change over switch in beeing-77/afsv store (t-24) building and aricraft store at af stn

CTN :39210614

25 Feb, 2025 NA

Mumbai - Maharashtra

Tender For supply of bso furniture items - commercial veneers (q3) , plywood bwr grade 4mm of size 8 feet x 4 feet , laminated sheet 1mm thick size 8 feet x 4 feet , elbow operated bib tap , plywood 10 mm thick 4 feet x 8 feet , sunfilm blue , sunfilm black , upvc cowl , washer for flush tank , fevicol 200 gm , gypsum false ceiling tiles 600x600 mm , elbow operated pillar tap

False Ceiling Tile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector