Fastener Strip Tenders

Get complete information related to latest Fastener Strip Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Fastener Strip Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Fastener Strip Tenders .

Filter

Loading....

Get Tender in Email

Central Government And Public Sector

CTN :39622709

18 Mar, 2025 48.00 Lacs

Vrindavan - Uttar Pradesh

Tender For asset management services - asset to be valued; onsite-supply of equipments:- variable refrigerant flow system, outdoor unit(s) - heating & cooling, 8hp outdoor unit, , indoor unit, ductable type units, ductable type unit 5.5 tr, , split units , split units 2.0tr, , , refrigerant joint(s), indoor refnet joints , controllers, central remote control, twining kit, pcb safety plate controller, installation of airconditioning system of following items--lifting, shifting, installation, testing and commissioning of outdoor units equiped with highly efficient varaiable speed scrool compressors in each outdoor unit with noise level not exceeding 70db(a), etc. with nitrogen reprocessing, vacumising, charging and top-up of r410 a gas as per requirement at site. (r410a gas make-dupont/honeywell) , lifting shifting & installation of outdoor units - 8hp , tesing & commissioning charges - 16hp , vacuum, nitrogen reprocessing & r410a- refrigerent topup -16hp , lifting, shifting, installation, testing and commissioning of indoor units with outer cabinet equiped with pre air-filters, multispeed inverter motor, dx coil section, drain pain,electronic expansion valves, pipe connections, pcbs etc. (fastener make- hilti) , , , indoor unit(s), ductable type units, ductable type units, ductable type unit 5.5 tr, , "supply, installation, testing and commissioning of refrigerant piping, tees, sockets, expanders and reducers as per requirement at site complete with supports, threaded rods, channel, tie, fasteners etc. interconnecting the outdoor condensing units and indoor evaporating units. (make-mandev/mexflow), nitrile rubber tubular insulation (make-supreme/superlon/armaflex/a-flex/k-flex/equivalent)" , "supply, installation, testing and commissioning of 2 core x 1.5 sq.mm copper conductor shielded data cable as per requirement at site complete with supports, threaded rods, channel, tie, fastners etc. for control between indoor and outdoor unit & for communication between indoor unit & remote controllers in suitable pvc conduict , (make- polycab/havells)" , , supply, installation, testing and commissioning of pvc condensate drain piping of 10kg/sq.cm. (142.23 psi) with 6 mm thick closed cell elastomeric nitrile rubber tubular insulation up to the nearest drain point along with necessary fittings.(make- prince/supreme/finolex/polycon/equivalent) , supply, installation, testing and commissioning of hot dipped 20 gauge g.i. perforated trays for exposed refrigerant pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc. , , supply, installation, testing and commissioning of un-insulated square/ rectangular sheet metal ducts as per requirement at site complete with threaded rods, channel, tie, fastners, brackets/slotted "c" channel for supply air ducting as per the approved shop drawings jindal, sail, tata. , , supply, installation, testing and commissioning of closed cell crossed linked polymers xlpe insulation , , supply, installation, testing and commissioning of acoustic lining with 10 mm elostomeric sinusoidal surface acoustical insualtion. , , supply, installation, testing and commissioning of extruded aluminum powder coated supply air grills/difusers with dampers and return air grills/diffusers without dampers. , supply/return air grills/diffusers with volume control dampers , supply, installation, testing and commissioning of nrv , , supply & installation charges of accessories fire retardent canvas connection & filters as required for duct type indoor units. , ms-stand for odu unit , ms-jaal , civil work chase cutting for copper/drain pipe , civil work rcc corecut/chase cutting for copper/drain pipe , annexure-iii-electrical installation and accessories-panel for 16hp odu , design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following lt panels fabricated out of 18 guage crca sheet steel in cubical formationwith reinforecment of suitab

Central Government/Public Sector

CTN :39605744

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of constuction, fabrication, installation and setting up of pradhan mantri jan aushadhi kendra (pmbjks) at ujjain railway station (circulating area) as per drawing & details attached of nid, adi , furniture steel. 12 compartment steel cloth locker h 2000 mm x w 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar , central table rectangular shap with ss base and wooden top of size 4 x 2 x 1.5 (design, size, and brand to be approved by c.a.) , visitors chair cushioned pch-7003 godrej, dice, methodex.one sample to approved. , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018) bench should be installed at station, station and qty. at each station will be advised by this office , supply and installation of ss swing bin hdpe 40 litter capacity (one set of three colour black+ blue+green) with sticker with ss stand of 304 grade approximate weight 10.00 kg with fastener.a sample to be approved. , supply and fixing of wooden reception table with following specifications: width x height x depth: 1524 x1069 x1524mm, 18mm thick pre laminated novapon board with melamine finish. two storage units with locking facility, high-quality locking mechanism available with a duplicate key, frame type: free standing, shape: l shape,model: office reception make godrej ikea, zuari wipro durian, a sample and design to be approved. , bed side table spec of item teak wood modular drawer with locker brand nilkamal, cello, godrej interio, ikea, zuari, wipro supreme size 475mm*457mm*432mm with two storage one sample to be approved before supply. , metal bed, made of tubular steel ss 304 rectangular / sqaure section, size l 1900 mm (+10mm) x w 900 mm (+10mm), structure of metal bed frame including legs and head. structure ss 304 pipe, thickness of hollow section in structure 1.3, material of mattress panel plywood sheet/ ss pipe, thickness of mattress panel 1.2 mm, height of bed 450 mm, paint/finish of m s parts powder coating, finish of head board powder coating, min powder/paint coating thickness (micron) = 60 micron , bath room set9 1)pvc bucket 20 l=01 ??. (2)pvc mug 1 l=01 no. (3) pvc patla stool 1x1 01 no. (4)s 5 soap case 01 no. (5) cloth hanger 01 no. (6) bath mirror pvc frame #01 no. (7) pvc d*bin 9 lit. 01 one sample to be approved. , teak wood make glass top centre table. size:-width-48 x depth-24 x height-18". a sample to be approved before supply. , double bed mattresses skin sens ultra gold fabric acro sleep memory foam size 6 x 6.5 x 6 godrej, springfir, sleepwell or kurlon or better , almirah steel small 1980x920x480 mmitem code: 781520831142 item type: supply item description: almirah steel shelving cabinate mild steel sheet confirming to grade hri of is: 1079-2009 size 1980x920x480 mm with proper lock and key , office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5x2.5x2.5 make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca , supply of wooden luggage rake made of 3 layer pre laminated particle board with aluminum/steel in lay on top smooth movement of luggage for waiting and retiring room (design, size and brand to be approved by c.a. , bathroom sets(1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 ltr. 01 no. (3) pvc stool (patla) 01 no. (4) pvc soap case 01 no. (5) cioth hanger 01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. 01 no. one set of sample to be approved by c.a. , supply and installation of superior quality eyelet curtain with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before supply , wall panelling of louvers with profile light & customized wallpaper on wall. make - abm or as simil

State Government

CTN :39491917

03 Mar, 2025 NA

Sagar - Madhya Pradesh

Tender For short term e-tender for sanitary items, plumbing items, electric items and other nursery items - western commode 1 piece rectangular shape floor mounted, indian sheet 590x450x300 mm white colour, wash basin 18" x 12", wash basin 24" x 18", wash basin pedestal 45 cm one piece, table top 24"x 18", kitchen sink 24"x18", sink cock (ss), angle cock (ss), pillar cock (ss), flush cock (ss), tee (1") (pvc), tee (1/2") (pvc), elbow(1") (pvc), elbow(1/2") (pvc), socket(1/2") (pvc), socket(1") (pvc), mta brass l (1/2"), mta brass t (1/2"), mta brass socket (1"), mta brass socket (1/2"), mta brass l (1"), mta brass t (1"), waste pipe, fastener (ms), end cap (pvc), plug (pvc), tank connector (pvc), union (1/2") (pvc), union (1") (pvc), ss flange, pipe (pvc) 1/2", pipe (pvc) 1/2" socket, pipe (pvc) 1", pipe (pvc) 1" socket, pipe (pvc) 1" t, pipe (pvc) 1" l, pipe (pvc) 2", pipe (pvc) 2" socket, pipe (pvc) 2" t, pipe (pvc) 2" l, pipe (pvc) 3", pipe (pvc) 3" socket, pipe(pvc) 3" t, pipe (pvc) 3" l, pipeb(pvc) 4", pipe (pvc) 4" socket, pipe (pvc) 4" t, pipe (pvc) 4" l, clamp brass, solvent 100 ml, valve (1/2") (pvc), valve (1") (pvc), steel kheela 3", steel kheela 4", steel kheela 6", taflon tape, reducer (1" to 0.5") (pvc), brass reducer (1" to 0.5"), steel ki jaali 5", hand flush (pvc), tap (ss), shower 6" (ss), murga set for toilet sheet, ceiling fan (branded company), j box (3way) (pvc), j box (4way) (pvc), switch ppi (pvc), power switch, 5 pin socket, fan regulator, module box (4way), module box (8way), module box (6way), module box (12way), fan sheet, power socket, mcb complete set (4 way), angle holder, exhaust fan 12", plaste ppi indicator, round sheet (pvc), led light 5w, led light 9w, led light 12w, led light 15w, led emergency bulb 12 w, street light 100 w, tube light 18 w, geyser 3 ltr instant type branded company, pipe 1" pvc (mtr), holder, gulli (paket), pvc patti, 12 way sheet, 4 way sheet, 8 way sheet, 6 way sheet, 16 amp socket, elbow 1", tee 1", ceiling light 5 watt, ceiling light 7 watt, ceiling light 9 watt, fan box, deep junction box, l bend, holder plate, screw/pench 1" box, screw/pench 1.5" box, screw/pench 2" box, copper wire 2.5 mm, copper wire 4 mm, copper wire 7 mm, 10 . . , 20 . . , 3 , 10", 4" ( ), , 6", 20 ( ), ( ), ( ), ( ), ( ), ( ), ( ), 100 . ., 1.5" ( . . ), 2" ( . . ), 2.5" ( . . ), 3" ( . . ), 40 . ., 75 . ., 120 . ., 150 . ., 80 , 100 , 120 , , 8 . . , 8 . . , (kg), ( ), ( . . ), 3", 4", 2.5" . . 6 8 . . . ., 3" . . 6 8 . . . ., 1 , ( ) 20 , , 2.5" ( ), 2.5" ( ), 3" ( ), 3" ( ), 2.5" ( ), 2.5" , 2.5" , 2.5" , 100 . ., 16 . . ( ), (2.5 x 4), ( ), (25 . . 5 ), ( . ), 150 , 18 . . ( ), ( ), ( . . ), . . . 12 , ( ) 600x480x600 , 6", , ( ), ( . .), 300 . . 8 . . . , 450 . . 8 . . . , 600 . . 8 . . . , 1 . . 2 , 1 . ., 5 2 , 7-5 3 , . . . ( . .), . . . ( . .), ( . .), 1 8 . . . ., 1 8 . . . ., ( ) 40 , ( )

Central Government/Public Sector

CTN :39281441

04 Mar, 2025 7.71 Lacs

Bhandara - Maharashtra

Tender For purchase of miscellaneous c class items annexure c for emd plant dongri buzurg mine-, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 1/2" nb, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 2" nb, m.s. heavy duty pipe class "c", plain ends suitable for steam line conf. to is:1239 (pt.i)/1979 with latest amendments & isi mark, dia. 3" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 1" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 3/4" nb, m.s. slip on flange, flat face, weldable as per bs 10, table "f", drilled. 2" nb, ms reducer socket weldable - 1" x 1/2" , chlorinated rubber paint - smoke grey in 20 lit. pack, thinner for chlorinated rubber paint berger/asian make or equivalent in 20 lit pack, oxygen regulator two stage 10x-63b, acetylene (da) regulator, single stage two gauge, hand shield armour with welding glass - 83 x 108 mm, ms elbow welded - 1/2", hdpe pipes 5 meter long: complete with 2 nos. m.s. slip on flanges as per bs 10, table d, at both end and 2 nos. long neck pipe end conf. to iss duly welded at both ends of pipes. - od 63mm, hdpe long neck pipe end od 63 mm, welding electrode - delta therm ss3-3.15mm or equivalent., welding electrode - delta therm ss-3 - 4 mm or equivalent., v belt b-70, v belt b-128, v belt b-48, spun cotton thread for bag closing m/c (suitable for 25no. needle modi thread no.2. (in cone of 1000 mtr.), welding hand gloves (leather) 14", helite packing non-metallic - 1/8" thick champion make (red coloured), painting brush - 2-1/2", rock drill hose pipe non metallic, working pressure 6 kg/sq.cm. size 3/4", rock drill hose pipe non metallic, working pressure 6 kg/sq.cm. size 1", teflon tape roll - 3/4", m s welding electrode - 3.15 mm (weldfast make or equivalent), m s welding electrode - 4 mm (weldfast make or equivalent), white chindhi (waste cotton for cleaning), bucket fastener dia.3/8" x 1-1/2" long, rubber packing sheet - 1/4" thick, cutting wheel- 4" (corburondum make or equivalent), mild steel hex.nuts & bolts (full threaded bsw) dia. 3/8"x2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.1/2"x2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.1/2"x2-1/2" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x3" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x4" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x5" long, mild steel hex.nuts & bolts (full threaded bsw) dia.5/8"x6" long, set of 12 nos. double ended ring spanner, size: 6x7 to 30x32 (taparia make only), set of 12 nos. double ended ring spanner, size: 6x7 to 30x32 (taparia make only), "thermocouple: sheath leangth 900 mm, type : k as per ansi mc 96.1, limits of error : standard (+/- 2.2 c), nos. of circuit: one (simplex), hot junction: ungrounded, sheath diameter : 12mm, sheath length : 1000 mm, sheath material : inconel 600, process connection : adjustable s.s.flange 1/2"" asa 150 rf, wire gauge : 16 swg, insulation : ceramic beads with mgo, tip rating : 1150 deg. c, termination : our standard weather, (proof die cast alluminium head with threaded cap chain & powder epoxy coating), cable entry : 1/2"" bsp (f), single", pvc half gum boot with specification:- cotton lining (inside), black colour, lsl marked, industrial outsole material . pvc. pu ankle low & high ankle material pvc usage/ application industrial features anti skid, heat resistant, length low ankle, gender male & female with lining, steel toe cap, sole color black, 14" length, certification lsl, heat resistance up to 120 deg.cel. , suitable for acid & alkalies resistance. mangla make or equivalent, size: no.6, pvc half gum boot with specification:- cotton lining (inside), black colour, lsl marked, industrial outsole

State Government

CTN :36800624

25 Jul, 2024 1.30 Crore

Nagaur - Rajasthan

Tender For matarial supply for nrega scheme and other - p.p.c., white cement, fine prechiger, rail/gravel, gravel local, ballast stone brick for other than road work, 400mm measurement hand broken sit boids cart 1/11), 400mm stone broken boids cart 1/11, amin stone broken boids cart 12/10/6 tikesher, samyo for road work, 63-40mm stone broken boids cart 1/11, 63-40mm hand broken stone road boil cut 1/11, 90-45mm. hand broken stone aggregate, kori ravish boyce cart 1/6), yevla boids cut 1/6), binding samayi 14-6) (dal cut 1/, brick (22.5117.50 cm), first class (stassi, second class, solin khareja chilai stone, masonry bera (, masonry ratha (chi, baranja soling (for digging work upto 15cm height), baranja soling (for road paving work 23cm height), arch width of sheet 10-12 length 2-3 morai 2.5-357, stone sheet (flaky materia(3-4" thick & length, 1-2" width, sandstina dpc, sl, coping lintel, tand almira et, 250mm thickness upto 25-40mm thickness, upto 40-50mm thickness, upto 2300 sq. cm, polished kota stone one side side, upto 1000 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble stone carving mirror 20mm thick, upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, marble chips, marble powder, marble stone (rajasthani 20mm thick), upto 900 sq. cm, upto 901 to 2300 sq. cm, upto 2300 sq. cm, stone grate, single pail 100 x 75 mm, double pail 125 x 75 mm., stone pail, upto 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 in length, minimum 75mm thick , precast tiles/rocks , glazed su-30x45 cm , verified size-60x60 cm , interlock tiles/b rick/block for road work , cement interlocking block m-30grade, 80mm thick , fittings with local cash. for doors, windows and furniture), others / teak, factory made doors (30 mm thick, solid and single sheet), structural steel, iron (tor steel fo-415/500 for reinforcement, widing via 18 gauge, iron girders, conia iron square green/leaf angle aman, jage wine and 14 quaestrad/34 jani, barbed iron lar size 12 guage wire and 12 guage strad/12, iron mesh (24 gauge, 14 mesh, module gi box, 2 for soil, 3 for module, module base and cover plate, 2 for module, 3 for module, modular swaying in, 15 marked, sp 5/6 ampere, sp 15/16 ampere, modular circuit outlet, marked, 6 pin 15/16 amp, steel fastener 5 mm 75 mm, scb db, 2+2 way, spn, single door, 2-4 in, spn, single door, 2+6 in, spn, single door, gi pipe (medium thickness., 15.00 mm dia, 40.00 mm dia, copper wire 8 swg (4.00 mm dia) (0.117 kya/m), ci/ms cover plate attached to frame with locking arrangement, pvc water tank body cover (as per 15:12701-1989, diesel road roller 8 to 10 ton, tractor (25-40 hp), tractor trolley, tractor water tanker samta 4000 liter weight, cement ket mixer 5-7 cubic feet, pumping set 15 hp, niddle/plate better mm operator, -grinding machine with operator big, motor i.e.), compressor, hydraulic excavater/cb (bucket capacity 0.4cum), scraper, shuttering ply with beam and other material, shuttering ply with batti and other material, shuttering nohe plate with batti and other material

Loading, Please wait...

Fastener Strip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government