Latest fiber bench Tenders | Government fiber bench Tenders

CTN :42402830

22 Nov, 2025 NA

Jalpaiguri - West Bengal

Tender For bid to ras construction force preservation box type c c - pre cast rcc box culverts of internal size 1000mm x 2000mm x 1600mm with outer wall thickness 250mm. , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film , cement ppc 53 grade in polythene of 50 kg each , sand coarse confirming to is 383 1970 , graded stone aggregate coarse 20mm confirming to is 383 1970 , quick setting compound , angle iron fencing post fabricated with isa 65x65x6mm of 3.75m long , angle iron corner post for struts fabricated with isa 65x65x6mm of 2.43m , flat iron 40x3mm and 2.20m long with five holes , ms black bolts 12mm dia and 50mm long , flat iron 25x3mm and 3.0m long , ms black bolts 8mm dia and 50mm long , galvanized steel chain link fence manufactured with 3.80mm dia galvanised steel wire with mesh size 50x50mm , galvanised steel brt wire , 600 mm dia steel wire entanglements wth galvanised steel concertina coil , paint synthetic enamel first quality black colour. , painting brush 2 inch , red oxide primer , ms steel wicket gate 1.20m wide single leaf , cement opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is 383 1970 , stone aggregate coarse 20mm conforming to is 383 1970 , stone aggregate coarse 40mm conforming to is 383 1970 , supply solar lantern model no ms122 solar lantern , 7 kw powered self start portable generator of heavy duty , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. , pcc solid block 400x200x200mm , pre cast rcc bench , 60mm thk heavy duty rubberised mat finish paver block tiles m 40 grade , cement opc 53 grade in polythene of 50 kg , transparent pipe 5mm dia bore for water leveling best quality , plaster trowel with wooden handle isi marked. , fish line best quality. , plumb bob iron best quality. , galvanised iron pan mortar , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge , multipurpose non slip rubber reusable gloves for , brick trowel steel 305 mm , gum boot best quality isi marked , plaster rod rod 1.2 m long selected quality , water bucket steel 13 inch dia , crow bar 5.1 kgs best quality , measuring tape 5 mtr , measuring tape 15 mtr

CTN :42760106

08 Dec, 2025 1.96 Crore

Jodhpur - Rajasthan

Tender For supply of vices--bench vice 50 mm , table vice 100 mm jaw , vices of 120 mm jaw , bench vice 125 mm , bench vice150 mm jaw , pipe vice cast iron with hardened jaw open type 100 mm , carpenter vice 250 mm jaw , compound angle standard sine , precisionangle grinding vice 200 mm , vice machine 100 mm jaw , vice machine 100 mm jaw swivel base , vice machine 125 mm swivel base , machine vice 150mm swivel base , machine vice 200 mm swivel base , magnetic vice , universal machine vice 100 mm

CTN :42758589

21 Nov, 2025 39.86 Lacs

Faridabad - Haryana

Tender For providing and supplying of cast iron and rcc bench for beautification in ward no.44 division-v, mcf

CTN :42760285

27 Nov, 2025 NA

Navsari - Gujarat

Tender For supply of cast iron bench

CTN :42740028

24 Nov, 2025 NA

Vijalpore - Gujarat

Tender For supply of cast iron bench (q3)

CTN :42740094

24 Nov, 2025 NA

Vijalpore - Gujarat

Tender For supply of cast iron bench (q3)

CTN :42760483

25 Nov, 2025 29.23 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of cast iron bench

CTN :42681393

27 Nov, 2025 5.00 Lacs

Hisar - Haryana

Tender For supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coating, item name

Corporations And Associations And Others

CTN :42736328

19 Nov, 2025 1.98 Lacs

Rohtak - Haryana

Tender For job no.1059/2025 (hew) work of providing and fixing of plastic dustbin and repair of cast iron bench in central park in sector-1 at u/e rohtak.

CTN :42718125

22 Nov, 2025 NA

Jodhpur - Rajasthan

Tender For supply of misc items d d - beetle m88 , beetle m 71w , cable 2 core , weighing machine , stabilizer , double wheel bench grinder , white board , magnetic ratchet screwdriver set , multimeter , change lever , cast iron vice heavy duty

Fiber Bench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others