Tender For bid to ras corrigendum : supply of service line cable : : - supplying and laying 4 core 16 sqmm cable , supplying and laying of 3 and half core 25 sqmm cable , supplying and fixing gi wire , providing and fixing kit kat fuse unit 63 ampere , providing and fixing kit kat fuse unit 100 ampere
Tender For corrigendum : supply of sf 11 kv ms dp structure 11kv 200a 3 ph supply as specified , sf 11 kv 200 amp gaob switch as specified , sf 11 kv 200 amp heavy duty dropout fuse set as specified , replacment of ligting arrestor 9 kv, 5 ka as specified , replacement of polymer disc insulator 11 kv as specified , replacement of polymer pin insulator 11 kv as specified , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick as specified , pvd fixing 25mm x 25mm gi strip in 40 mm dia gi pipe , pvd fixing 25mm x 25mm gi strip on surface or recess , supply laying 3 core 95 sq mm xlpe ht power cable 11kv in rcc hume pipe as specified , supply making indoor cable end termination with heat shrinkable jointing kit for 95 sq mm cable , supply making straight through cable jointing with heat shrinkable jointing kit for 95 sq mm cable , re fixing of existing protection cover arrangeement with wire mesh ms angle structure etc , providing gi or ms wire mesh i.e. netting of weleded or woven gi or ms wires , supply fixing ms structure of suitable size
Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cablelaying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.
Tender For supply of s and f of ring main system for wss - supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc
Tender For supply of cable termination kit suitable for cables up to and including 33 kv (v2) (q3) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , supply install testing commissioning of step down transformer voltage rating ht11 bye 0. 433 kv out door type of capacity 250 kva level 2 3 phase 4 wire 50 hz , supply, install, testing and commissioning of step down transformer voltage rating ht11 by 0.433 kv, out door type of capacity 315 kva level 2, 3 phase, 4 wire,50 hz , supply laying and testing 11 kv earthed grades cable xlpe 120 sqmm 3 core.complete all as specified and directed in boq spec file , material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directely in ground vertically , material and labour for earthing complete with copper plate electrode 600mmx 600mmx 3.15 mm thick buried directely in ground vertically.complete all as specified and directed in boq spec file , m and l for brick sub class b, 250mm x 115mm x 0.75mm and laid in trenches as in protection of ug cable complete all as specified and directed in boq specification file , supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover , excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil , returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed in boq spec file , removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed in boq spec file , m and l for gl pipe 100 mm light grade laid in trenches floors bye on pole bye road for cable protection with all fittings complete all as specified and directed in boq spec file , boaring holes horizontally under road without damaging the surface of road minimum1.0 mtr bellow the road surface with the help of gl tubing of any dia not exc 80mm dia for passing of ug cable. , supplying and laying reinforce precast concrete cable cover class ht type 1 flat size 300 x180x40 mm for protection under ground ht cable complete all as specified and directed in boq spec file , disconnected all electrical connections and earth strip at existing transformerall connected accessories by cables and shifting of 11 kv by 0.433 volts 200 kva to 315 kva capacity transformer. //bid details 2 / 22
Tender For electrification work at chhachhi vts and lighthouse station - wiring for light, fan, exhaust fan, call bell point with 1.5 sq.mm frls pvc insulated copper conductor , wiring for light, power plug with 2x4 sq. mm frls pvc insulated copper conductor , wiring for circuit, submain wiring along with earth wire, 2 x 2.5 sq. mm and 1 x 2.5 sq. mm , supplying and fixing of 25mm size of medium class pvc conduit , supplying and fixing 2m box with frame and cover plate , supplying and fixing 3m box with frame and cover plate , supplying and fixing 4m box with frame and cover plate , supplying and fixing 6m box with frame and cover plate , supplying and fixing 12m box with frame and cover plate , supplying and fixing 18m box with frame and cover plate , supply and installation of 6m modular switch board box , supply and installation of 12m modular switch board box , classic red neon modular indicator light 1m , supplying and fixing 5 or 6a modular 1 way switch , supplying and fixing 3 pin 5 or 6 a modular socket outlet , supplying and fixing 15 or 16 a modular 1 way switch , supplying and fixing 6 pin 15 or16 a modular socket outlet , supplying and fixing bell push modular , supplying and fixing 2 way switch , supplying and fixing two module stepped type electronic fan regulator , supplying and fixing modular blanking plate , supplying and fixing modular angle holder , supplying and fixing pvc adapter for modular angle holder. , supply and fixing 3 pin, 5a ceiling rose , supplying and fixing call bell , supplying and fixing 16 way, double door mcb distribution board , supplying and fixing 4way mcb db with 2nos blanking plate , supplying and fixing mcb single pole 10amp , supplying and fixing mcb single pole 16amp , supplying and fixing mcb single pole and neutral 20amp , supplying and fixing mcb triple pole and neutral 32amp , insulation tape, steel grip , supply of led t5 10w , supply and installation of 15w led bulb , supply of led t5 ) /bid number : gem/2026/b/7520313 * /dated: 08-05-2026 & & / bid document 1 / 44 20w , supply and installation o 25w led street light luminaire , supply and installation of adjustable wall mount stand for installation of street light , supply of 0.5w led bulb , supply of 12w led round surface light for ceiling , supply of 8inch 18w led round surface light for ceiling , installation, testing and commissioning of supplied items as per site requirement , supply and installtion of fan box , supply of copper winding ceiling fan 1200mm, 5star isi mark , supply of copper winding ceiling fan 900mm, 5 star, isi mark , supply and installation of 400mm bracket mounted fan , supply of 150 mm exhaust fan with dust protection shutters , installation, testing and commissioning of ceiling fan, including wiring the down rods , supplying and fixing 25inch ceiling fan down rod , installation of 150mm exhaust fan , supply and fixation of 19mm plywood and any extra carpentry work , 10sq.mm x 1c green flexible copper wire , supply and installation of 2 pole, 16a dc mcb , supply and laying of 10sq.mmx 4c copper xlpe armoured cable , excavation of the cable trenches , supply and installation of 2hp monoblock pump , supply and installation of 2hp motor electronics starter , supply of good quality nylon flexible pipe for gardening purpose , supply and installation of 12m modular extension board , 2.5sq.mm x 3c copper flexible cable for extension board , supply of 2000w or better induction heater cook top , supply of 1.5kw or better immersion water heater , supply and installation of indoor 3phase surge protector , removal of complete old wiring and electrical fittings along with accessories , supply of heavy-duty metal trolly , supply of rubber hand gloves , supply of hand-held led torch , supply of self ballasted 10w led bulb , wall mount battery powered electronics lcd clock , miscellaneous items
Tender For providing laying and fitting of g.i hdpe pipes, construction of 03 nos inlet tanks construction of chain link fencing construction of nallah crossing g.i wire rope for gravity main and installation of fhtcs of wss cheshoti damaged due to cloud burst
Tender For supply of electrical works tt parking pachpadra d d - sitc of main lt panel , s,f,i ms steel , sup 3.5cx400sq.mm a2xfy , sup 3.5cx35sq.mm a2xfy , sup 3.5cx25sq.mm a2xfy , sup 4cx16sq.mm a2xfy , sup 6cx2.5sq.mm ywy_cu_ , sup 3cx4sq.mm ywy_cu_ , sup 3cx2.5sq.mm ywy_cu_ , lay 3.5cx400sq.mm a2xfy , lay 3.5cx35sq.mm a2xfy , lay 3.5cx25sq. mm a2xfy , lay 4cx16sq.mm a2xfy , lay 6cx2.5sq.mm ywy_cu_ , lay 3cx4sq.mm ywy , lay 3cx2.5sq.mm ywy_cu_ , nflp end termination 3.5cx400sq.mm a2xfy , nflp end termination 16sq.mm cable , nflp end termination 3.5cx35sq.mm a2xfy , nflp end termination 3.5cx25sq.mm a2xfy , nflp end termination 4cx16sq.mm a2xfy , nflp end termination 4cx4sq.mm ywy , cable jointing kit for 3.5cx400sq.mm , s,i,t,c of earthpits , sitc 50x6mm gi strip , sitc 25x3mm gi strip , sitc 4sq.mm cu flex wire with crimped cu lugs. , trench 500 mm wide , trench 450 mm wide , excavation , reinforcement steel , sup and lay pcc 1_2_4 , sup and lay m25 rcc , supply and fix shuttering , supply and construct brick masonry works , supply and lay fine river sand , supply and laying bricks , 500 mm np3 with wall thickness 75 mm. , 450 mm np3 with wall thickness 70 mm. , 250 mm np3 with wall thickness 35 mm. , sitc 30 mtr. high mast tower , sandi foundation bolt _oem make only_ , civil foundation for high mast , sitc flp type feeder pillar , sitc 500 w led floodlight luminaire , supply double dome aviation lamp , illumination measurement and submit report , sitc db-ammenity building , sitc db-security cabins , first aid kit , shock treatment board , caution board lt 440 1000 volt , rubber mats , s and f 5 bucket with sand with frame , s and f 2inch radium stickers. , sitc route markers , dismantling, shifting, installation and commissioning of existing high mast ) /bid number : gem/2026/b/7488330 * /dated: 07-05-2026 & & / bid document 1 / 43