Latest field preparation Tenders | Government field preparation Tenders

CTN :42863482

28 Nov, 2025 6.51 Lacs

Chandigarh - Chandigarh

Tender For repair and replacement of public health fixtures accessories and all other items in house no 20 type 6 sector 7 chandigarh (2216 np (p) maintenance and repair - excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m dsr 2.10, all kinds of soil. dsr 2.10.1, pipes, cables etc. not exceeding 80 mm dia. dsr 2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia dsr 2.10.1.2, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : dsr 6.4, cement mortar 1:4 (1 cement : 4 coarse sand) dsr 6.4.1, providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : dsr 17.3, w.c. pan with isi marked white solid plastic seat and lid dsr 17.3.1, providing and fixing wash basin with c.i. brackets, 15 mm dia cp brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: dsr 17.7, (a) white vitreous china wash basin size 550x400 mm with a 15 mm cp brass single hole basin mixer dsr 17.7.3, providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.dsr 17.8, providing and fixing white vitreous china water closet squatting pan (indian type) : dsr 17.13, orissa pattern w.c. pan of size 580x440 mm dsr 17.13.2, providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. dsr 17.19, 10 litre (full flush) capacity-white dsr 17.19.1, providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings as dsr 17.28, 32 mm dia : dsr 17.28.1.1, providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, incl. cost of cutting and making good the walls and floors. dsr 17.60, 100 mm inlet and 75 mm outlet dsr 17.60.2, sand cast iron s&s as per is- 3989 dsr17.60.2.1, providing and fixing g.i. pipes complete with g.i. fittings and clamps,i/c cutting and making good the walls etc. : dsr 18.10, internal work - exposed on wall, 15 mm dia. nominal bore : dsr 18.10.1, 20 mm dia. nominal bore : dsr 18.10.2, providing and fixing of forged brass / gm gate valve, size 20mm i/d dsr 18.17.1a, providing and fixing uplasticised pvc connection pipe with brass unions : dsr 18.21, 45 cm length : dsr 18.21.2, 15 mm nominal bore : dsr 18.21.2.1, providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) : dsr 18.46, 15 mm nominal bore : dsr 18.46.1, 20 mm nominal bore : dsr 18.46.2, providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr 18.48, providing and fixing c.p. brass bib cock of approved quality conforming to is:8931 : dsr 18.49, 15 mm nominal bore. dsr 18.49.1, providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 69

State Government

CTN :42881023

01 Dec, 2025 14.08 Lacs

Delhi - Delhi

Tender For providing and installation of open gym equipments at dada maldev stadium, dariyapurkalan under dilligramodhyaabhiyaan (dga). - excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (a) all kinds of soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-iii) : 10 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size)., providing and laying 60mm thick faciory made cement concrete interlocking paver block of m -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge., providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge)., surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.(a) all kinds of soil, providing and installation of air walker / health walker of size 1070x615x1509mm fabricated with main post of 114mm c class g.i. pipe made of hot roller tubular steel and hot dipped galvanized and powder welded coated using akzo nobel of 60-80 micron thick., providing and installation of double sit-up station with below specifications:- dimensions (lxwxh): 1500x1150x650mm, fabricated with main post of nb 50mm (g.i) c class pipe of approved make. main frame of nb 32mm (g.i) c class pipe, leg support of nb 65mm (g.i) c class pipe ( nb stands for nominal bore i.e., internal diameter of pipe in millimeters) fixed on its top is back support made of perforated ms sheet of 2mm thickness. all pipes are powder coated using akzo nobel or equivalent point of 80-120micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint is applied at all the welding points prior to finishing., providing and installation of surf board/air swing of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and c class g.i. pipe as per is-1239 and rest of the pipe 40mm dia c class g.i. pipe as per is-1239 and powder coated using akzo nobel or equivalent of 60-80 micron thick., providing and installation of horse rider station with below specifications:- dimensions: 1000x600x1100mm. fabricated with main post of nb 100mm (g.i) c class pipe of approved make. main frame of nb 65mm (g.i) c class pipe. handle support frame of nb 50mm (g.i) c class pipe. ( nb stands for nominal bore i.e., internal diameter of pipe in millimeters). all pipes are powder coated with 80-120 micron thick akzo nobel or equivalent paints. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint is applied at all the welding points pr

State Government

CTN :42894960

29 Nov, 2025 3.30 Lacs

Mandi - Himachal Pradesh

Tender For hiring of earth cutting/ excavating machine for removal of slips/ debris, dressing of berms, clearing of drain and catch pit etc. for opening of roads during monsoon season in (i) baragaon bah padwahan road (ii) drang basahi road (iii) nashdhra to ba

State Government

CTN :42858755

26 Nov, 2025 3.52 Lacs

Kangra - Himachal Pradesh

Tender For hiring of earth cutting/ excavating machine for removal of slips/ debris, dressing of berms, clearing of drain and catch pit etc. for opening of roads during monsoon season in (i) padhar to nauhli road (ii) padhar to bharwahan road (iii) urla to kotr

Central Government/Public Sector

CTN :42825963

09 Dec, 2025 42.65 Lacs

Allahabad - Uttar Pradesh

Tender For provision of pol stores for microlight base elect section tool crib addn altn of roof sheet provn of view cutters and other allied work at certain location of af station under ge af bamrauli - surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed., excavation in trenches for n.exc 1.50m wide not exceeding 10 sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out, complete all as specified and directed., excavating over areas hard & dense soil, n. exc 1.5 m deep and getting out, complete all as specified and directed., m&l for pcc 1:4:8 type d2 graded stone aggregate cement concrete in flooring, foundation, filling and mass, complete all as specified and directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed., removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. complete all as specified and directed., m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed., m& l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, complete all as specified and directed., m&l for rcc (20mm grade aggregate type b1 (1:2:4) nominal mix columns, pillars, piers, posts and struts, complete all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate to chajjas, complete all as specified and directed., m&l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed., m&l for formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed., m&l for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), complete all as specified and directed., m&l for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed., m&l for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of rcc/pcc bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed., s&f for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed., s&f for mild steel tmt or twisted bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups etc. complete all as specified and directed., m& l for pcc 75mm thick type c-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection, complete all as specified and directed., m&l for brick work with sub class b bricks, straight or curved on

State Government

CTN :42834211

24 Nov, 2025 NA

Mandi - Himachal Pradesh

Tender For vkv/2024/1119, r/o road from aarang kotang to hiru dhar & bus stand to mandru. (sh: hiring of earth cutting/ excavating machine for removal of slips, dressing of berms, clearance of side drains).

CTN :42849454

01 Dec, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1),mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1),mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1),modular piano type domestic electrical switches as per is 3854,ceiling rose - is 371,led batten,brick,surface excavation 30 cm deep and averaging 15cm deep,excavating in post holes 0.5 cum getting out,material and labour cement concrete 1 by 3 by 6 type c2,returning filling incl spreading levelling watering and ramming in layers,removing excavated material 50m and not exc 100m,material and labour for brick works with fly ash bricks,material and labour for rendering 15mm thick in two coats,material and labour for applying two coat of exterior emulsion paint,supply and fixing steel work in tubular trusses ms pipes in vertical column,supply and fix galvalume alu coating gi based steel sheet 0.50mm thick in roof,s and f galvalume alu coating gi based plain steel sh

CTN :42774032

25 Nov, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of excavating in post holes or similar holes each n exc 0.5 cum , material and labour for cement concrete using 40 mm graded crushed stone , supply and fixing for mild steel posts and struts in fencing , supply only chain link ms galvanisd fencing of any size or type , fixing only chain link fencing including line wires , supply and fixing galavanized, 2 strand, steel barbed wire 2.24 mm dia , supply and fixing 10mm dia mild steel round bars for fixing chain link fencing , supply and fixing of mild steel screw bolts machine made with hexagonal , material and labour for preperation of new steel surfaces exec 10cm width

corporations/Associations/Others

CTN :42715127

25 Nov, 2025 NA

Natham - Tamil Nadu

Tender For supply, fabrication, erection of gi steel structures, earthing, materials, etc., for introduction of 110/33kv ratio at natham 110kv ss - steels: supply of steel items as per tneb specification including cost of materials loading transporting unloading and delivery at site complete, 200 x 100 rs joist, 125 x 65 mm m.s.channel, 100 x 50 mm m.s.channel, 65 x 65 x 6 mm m.s.angle, 50 x 50 x 6 mm m.s.angle, 40 mm m.s.round rod, 65 x 10 mm m.s.flat, 50 x 8 m.s.flat, 6mm chequered, labour charges for hot dip galvanising of mild steel materials including transport, lead, lift, etc., complete wherever required as directed by the field engineer., labour, machinery consumables for the fabrication for steels structures, heavy section (14kg/m and above), light section (below 14 kg/m), labour for the erection of the fabricated steels structures, heavy section (14kg/m and above), light section (below 14kg/m), labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike) as directed by the field engineer., labour for excavating and refilling of earth/ trench for earthmat, cable, etc., of any size/ depth narrow excavation as directed by the field engineer. normal clay/ hard gravel soil, providing earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth pits with supply and providing of bentonite powder (sodium bentonite) 5kg/ mtr depth of the bore mixed with low resistivity earths as directed by the field engineer (earth to be supplied by the contractor), labour charges for providing grouting pocket placing grouting bolt by template for breaker 110kv c.t/ pt structure foundation, supply & labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer., labour charges for writing details in any finished surface/ board including cost of enamel paints and other consumables as directed by the field engineer., labour for the erection breaker using crane arranged by the contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes gas filling wherever necessary as directed by the field engineer., 110kv sf6 breaker, 33/22/11kv vcb, labour for erection of measurement transformers reactor units using crane arranged by the contractor including providing holes wherever required as directed by the field engineer, 33/22/11kv ct & pt, 110kv ct & pt, labour for erection of isolators with proper allingments including accessories, meggering and cost of consumables and lubricants and as directed by the field engineer., 110kv isolators w/o earth - hand operated, 33/22/11kv isolator, las: labour for erection of las station/ distribution type single unit including monitor from the acesssories, 110kv las with surge monitors, 33/22/11kv las, labour for the erection of strung bus and all related hardwares, fittings, clamps including meggering, hoisting of insulators, and consumables and as directed by the field engineer., 110kv single conductor strung bus/phase, upto 33/11kv single conductor strung bus/ phase, labour for the erection of insulator single pole stack for supports uprights/ underhang including meggering & other consumables and as directed by the field engineer. 110 kv, labour for the erection of busbar including suitable modifications of end clamps, providing holes wherever necessary as directed by the field engineer., 75 mm (1 length), 75 mm (with bend), 50 mm (1 length), labour for the erection of jumper/ droppers using moose/ zebra/ panther conductors including modification of end clamps, providing holes etc wherever necessary as directed by the field engineer., labour for erection of battery set incl