Tender For providing of custom bid for services - tender for carrying out preventive/predictive maintenance of firefightingequipments and shed equipments at lalru lpg plant
Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr
Tender For corrigendum : jp/b862-000-mf-mr-8007/104 - chassis mounted firefightingequipment for pdh pp plant with ethane and propane handling facilities project at dahej, gujarat
Tender For annual maintenance for firefightingequipments, smoke detectors, refilling of existing fire extinguishers and other allied works at karnataka public service commission building, bengaluru.( period from(01/08/2026 to 31/07/2027)
Tender For installation of baling (10 hp), sieving (15 hp), and shredding grinders (20 hp) in the plastic processing unit (mrf) under plastic and solid waste management. and implemented and operated by prioritizing the installation of conveyor belts, weighing machines, plastic granulators/screwdrivers, mother-baby press machines, cutter machines (3-5 hp), agro-machine with motors (70-80 hp), water tanks, washing point dryers, cording machines (for making cotton from waste cloth), fire safety equipment/machines, and other necessary equipment in the initial phase
Tender For repair maintenance of e&m services at sankhyiki bhawan in cbd shahdara, delhi. (sh: repairing / replacement of firefightingequipment & other accessories).
Tender For corrigendum : dismantling, supply, installation, testing, and commissioning of 5 nos. passenger lifts and 5 nos. goods lifts in it buildings at technopark phase i campus, trivandrum - dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lifts for nila building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1360 kg, rated speed 2.0 m/s, serving g+7 floors with 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, dcs control, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type passenger lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 680 kg, rated speed 1.5 m/s, serving g+3 floors with 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, car enclosure, landing doors, operating/control/safety accessories, ard, fireman operation, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lift, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for gayatri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1500 kg, rated speed 1.0 m/s, serving 4 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lifts on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lifts for bhavani building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 2500 kg, rated speed 1.0 m/s, serving 8 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, statutory approvals including lift license, dismantling of existing lifts, buy-back of dismantled materials and all associated works complete as per technical specifications, relevant is standards and tender conditions., dismantling of existing lift on buy-back basis and design, manufacturing, supply, installation, testing & commissioning (dmsitc) of machine room type goods / service lift for chandragiri building, gearless ac vvvf type, suitable for operation on 3-phase, 415v, 50 hz ac supply, having rated capacity of 1000 kg, rated speed 1.0 m/s, serving 5 stops/openings, complete with machine, controller, guide rails, ropes, counterweights, heavy-duty car enclosure, chequered plate flooring, operating/control/safety accessories, ard, fire recall, iot and bms integration, ip-based cctv provision, s