Tender For auction sale of others - scrap, cond, unserviceable pick up van (mahindra) vehicle in dilapidated condition. quantity=1 number, vehicle number ap29 v 0749 , approximately weight of vehicle=1.735 mt, total nominal weight of lot =1.735 mt location: diesel loco shed premises, moula ali secunderabad. custodian: sse dsl mly, note: chassis & engine number and number plates of vehicle should be remove and handed over to the custodian before effecting delivery. delivery by actual weighment basis only. ds-8 no.073611-25-09123 dated 20.01.2026 and state: telangana. plno.98050011 hsn code 72044100, refer to depot conditions for gstin of state railways, list of holidays and other conditions and special conditions [1] in order to make assessment the purchaser may visit the lot location and inspect the lot and satisfy themselves before bidding [2]post auction no representation shall be entertained.[3] picking & choosing of material is not allowed while taking delivery.[4] cutting is permitted and chassis & engine number of vehicle should be cut and returned to the custodian before effecting delivery. [5] purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment's such as crane, cutting equipment's and necessary trained men for cutting & loading [6] the purchaser is responsible for providing adequate safety firefightingequipment's on the location at the time of cutting and delivery. [7]. the purchaser shall be liable to make good any damage loss caused to railway property during cutting and delivery.
Tender For supply, delivery and installation of office furniture required for new office building at jusnl hqrs, kusai colony, doranda, ranchi. - director table, "office table with leatherette desk pad, side runner and pedestal, size : 2200w x 1050d x 760h mm, material : mdf, colour : walnut.table top thickness : 80mm thick. a movable pedestal unit features 3 spacious drawers. a side runner to features 1 cabinet, 1 drawer, 1 shelf, a dedicated cpu shelf and a trolley. a keyboard trolley offers a clutter-free workspace.", ed table table size-(w) 1600mm x (d) 800mm x (h) 765mm, "800mm x (h) 765mm. featuring rich walnut and grey finish. complete with a movable drawer pedestal unit equipped with a dial-locking mechanism for added security. spacious tabletop offers ample workspace. includes a movable pedestal unit with three drawers and 1 cabinet offer generous storage.the product must be from a manufacturer having iso 9001,iso", gm table table size-(w) 1600mm x (d) 800mm x (h) 765mm, "400mm(d)x 660mm(h), (construction is 1 openable door + 1 open shelve for cpu back side have 3 holes ,in between both 1 key board tray with telescopic channel& 1 open box storage (l) 550mm x (h) 350mm from down 1-drawer . 2 drawers mobile pedestal of size 400mm(l)x 480mm(d)x 550mm(h) , having 2 drawers with castors in provided with cetnral lock for security and given curved shaped upper drawer are provided for easy of opening.overall construction of pedestal is 18 mm along with fecia of drawers. ", table size-(w) 1600mm x (d) 800mm x (h) 765mm, "made of prelaminated particle boardwith metal pedestal in top- maple,metal-ms metalpowder coated colorwith main table size 1650mm(l)x 900mm(d)x 750mm(h).", conference room table 30 seater, "providing & supplying u - shape modern design conference table & in between u shape , tabletop offers you a generous workspace,desk primary work surface use premium quality materials table top made of 25 mm thick which give more surface area for work ,machine made modular furniture made prelaminated particle board of grade ii type iii of is 12823/latest,* construction provision of conference tabletop supported with 18mm thick side pannels in brown-black oak colour made by prelaminated particle board and below the top 18mm thick prelam particle board modesty panel. exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade,fixed with hot melt glue. ", executive chair, "high back natural leather chair in black colour with matte finish specification : type :high back 360° degre revolving chair ,all over size : 673mm(l)x 508mm(d)x 1270mm(h) ,the chair made of full natural leather in black colour .must be extra padded designed for more confirmt at workplace in contemporary style .details :arms : wooden arms with lether padding arm rest are fitted to the seat & back .* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) .seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat . back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back .backrest support foam design based on symmetrical lumbar support* mechanism : multi-locking knee tilt mechanism . seat maximum height is 580mm & minimum height is 500mm & back height from floor maximum height is 1270mm & minimum height is 1219mm* gas lift 80mm telescopic haudraulic * base : the prong (base) to be polished and fitted with 5 numbers. twin wheel castors (castor wheel dia. 50mm) & 700mm pitch center dia (740mm with castors)" , executive chair, " high back natural leather chair in black colour specification : * high back 360° degre revolving chair ,* all over size : 650mm(l)x 480mm(d)x 1300mm(h) ,*the chair to be made of full natural leather in black colour .* arms : chrome finish arm rest covering with natural leather pad.* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 fo
Tender For bid to ras bid to ras supply of supply-firefightingequipment as per technical specification tb-434-552-01,clause-8-a,annexure-boq sl no 1 to 70 for pgcil barmer-i new , spares-firefightingequipment as per technical specification tb-434-552-01,clause-8-a,annexure-boq sl no 71 and 72 for pgcil barmer-i new , etc- firefightingequipment as per technical specification tb-434-552- 01,clause-8-a,annexure-boq sl no 1 to 70 and 73 to 78 for pgcil barmer-i new , supply-firefightingequipment as per technical specification tb-434-552- 01,clause-8-b,annexure-boq sl no 1 to 35 for pgcil sirohi extn , etc-firefightingequipment as per technical specification tb-434-552-01,clause-8- b,annexure-boq sl no 1 to 41 for pgcil sirohi extn , supply-firefightingequipment as per technical specification tb-434-552-01,clause-8-c,annexure-boq sl no 1 to 7 for pgcil fatehgarh-iii extn , etc-firefightingequipment as per technical specification tb-434-552-01,clause-8-c,annexure-boq sl no 1 to 8 for pgcil fatehgarh-iii extn
Tender For corrigendum : supply of life saving and firefightingequipment for bangladesh dredger yard 2121 - life buoys with vessel name and home port , life buoys_vessel and home prt,lght and smk sgnl , life buoys_vessel name and home port_light , life line _l_equal to_30m, dia8mm, orange colour_ , life jackets with retro reflective matl , immersion suits_number as solas_stored , emergency breathing app.,sabre elsa-b-15 , work vests , safety harness , boat hook , stretcher , first aid kit,contain mca,english stickr , rocket parachute flares_set of 12pieces_ , emergency flashlight , line-throwing devices each _ 250m line , distress signals consist_following items , safety plan storage tube,a0size,red , fire blanket,180x120cm,fiberglass , wheeled foam extinguisher _45l_ , spare charges for foam extinguisher_45l_ , co2 extinguisher _5kg_, b, mc5 , spare charges_co2 extinguisher _5kg_,mc5 , powder extinguisher_6kg__stowage arrgt. , spare charges_powder extinguisher _6kg_ , stowage bracket_wheeled foam extinguishr , stowage bracket_co2 extinguisher _5kg_ , stowage bracket_powder extinguisher_6kg_ , portable foam applicator unit , fire locker for fireman outfit , protective suit medium,dark blue_reflctr , protective boots for fireman , protective gloves for fireman , protective helmet with visor for fireman , firemans torch,bright star 2217 ledat , firemans axe _ss with insulated handl , self-contained breathing apparatus , safety harness,protecta first ab17711uni , firemans belt with line,1.5m line , spare oxygen cylinder 6 ltr, 300 bar , valid type approval certificate , certificate_conformity and guarantee certi. , class inspection certificates , warranty extension charge for 1st year , warranty extension charge for 2nd year
Tender For supply and installation of aerosol based firefightingequipment at indoor ward, eye ward, blood bank, admin building of sdh, gunupur rayagada vide addition/alterations letter no- 8078 dated. 23.03.2026 of dhso buildings. - supply & installation of 8 gm portable aerosol based automatic fire extinguisher (coverage: 0.008 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 20 gm portable aerosol based automatic fire extinguisher (coverage: 0.2 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 30 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.3 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module.replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 60 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.6 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 100 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 1 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 200 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 2 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including al
Tender For supply and installation of aerosol based firefightingequipment at new chc building muniguda rayagada vide addition/alterations letter no- 8078 dated. 23.03.2026 of dhso buildings. - supply & installation of 8 gm portable aerosol based automatic fire extinguisher (coverage: 0.008 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 20 gm portable aerosol based automatic fire extinguisher (coverage: 0.2 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 30 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.3 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module.replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 60 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.6 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 100 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 1 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 200 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 2 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofeng
Tender For supply and installation of aerosol based firefightingequipment at opd/ipd building bissamcuttack rayagada vide addition/alterations letter no- 8078 dated 23.03.2026 of dhso buildings. - supply & installation of 8 gm portable aerosol based automatic fire extinguisher (coverage: 0.008 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 20 gm portable aerosol based automatic fire extinguisher (coverage: 0.2 m3), en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction of engineer-in-charge. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 30 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.3 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module.replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 60 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 0.6 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 100 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 1 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction ofengineer-in-charge. the triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. replacement warranty on the product shall be 3 years and shell-life of 10 years. make-pyrogen/genefire/stat-x/equivalent, supply & installation of 200 gm portable aerosol based automatic triggering through linear heat detection cable/electrical initiation fire extinguisher (coverage: 2 m3) , en 15276-1:2019 and en 15276-2:2019 ,iso 15779:2011 approved ,capable for extinguishing class a, b, c & e fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg celcius including all accessories as per the direction o