Latest fire protection services Tenders | Government fire protection services Tenders

Central Government/Public Sector

CTN :45494504

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of control panel relay card as per part no. jk-fdss-1226 for automatic fire detection & suppression system of make: jk exim as per specification no. is/rdso/cg/s/22001 for power/pantry cars. [ warranty period: 48 months after the date of delivery ] ]

State Government

CTN :45491413

20 Jun, 2026 6.31 Lacs

Ahmedabad - Gujarat

Tender For fire prevention and life safety equipment and auxiliary work for mamlatdar office at detroj, dist.: ahmedabad.- supplying, installing, testing and commissioning main electric motor driven 20 hp horizontal centrifugal end suction mono block type pump, 900 lpm @ 56 mtr. head , supplying, installing, testing and commissioning of control panel suitable for start and stop of main electrical pump (20 hp) , supplying, installing, testing and commissioning of copper flexible cable frls for 20 hp pump, 3 c x 6 sqmm , supplying, installing, testing and commissioning of dial type pressure guage having 100 mm dial & range of 0-14 kg/cm2 with isolation valve , supplying, installing, testing and commissioning of cast iron butterfly valve conforming to bs 5155 class pn 1.6 rating of size 100 mm , supplying, installing, testing and commissioning of cast iron non-return valve class pn 1.6 rating of sizes , supplying, installing, testing and commissioning of 25 mm dia brass single acting air release valve , supplying, installing, testing and commissioning of forged brass ball valve, screw end type, pn 1.6 rating of sizes 25 mm , supplying, installing, testing and commissioning of ms erw class 'heavy' pipes confirming to is 1239 pt -i heavy grade upto 150 nb & above is: 3589 with painting, with anchor fasteners, bolts nuts, clamps, "u" bolts, ms fittings such as reducers, tees, elbows etc. as per drawings. incl painting the pipe line with coat of synthetic enamel over base coat of red oxide paint , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of 63 mm dia 15m long non percolating flexible hose (rrl type a) with stainless steel male & female instanteneous type coupling , supplying, installing, testing and commissioning of standard stainless steel branch pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling , supplying, installing, testing and commissioning of standard fire hose cabinet wall mounting type having single door opening with necessary locking arrangement by allan key suitable for housing of 1 nos. 15 mtrs. hose pipe & 1 no. branch pipe, ms 18 gauge , supplying, installing, testing and commissioning of wall mounting type first aid fire hose reel with drum, hanging bracket, 30 m x 25 mm dia high pressure hose pipe with 8 mm ss shut off nozzle and all required accessories , supplying, installing, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built in non return valves instantaneous coupling type arranged on 100 mm dia. pipe , supplying, installing, testing and commissioning of fire alarm and pump trigger system as per requirement and specification consisting of following items , pump on/off switch , cable for pump on-off switch, 3 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , manual call point (mcp) , hooter , fire alarm panel, conventional type, 2 zone panel with battery backup , cable for mcp, hooter, 2 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , supplying, installing, testing and commissioning of fire extinguishers of following types co2 type fire extinguisher of capacity 4.5 kg with hanging bracket & accessories , stored pressure type dry chemical powder extinguisher of capacity 6.0 kgs. as per is , 15683 with hanging bracket & accessories , providing and fixing, testing and commissioning of ci y-type strainer with ss mesh conforming to pn 1.6 rating of size 100 mm , design & engineering, survey charges

State Government

CTN :45492146

20 Jun, 2026 6.71 Lacs

Ahmedabad - Gujarat

Tender For fire prevention and life safety equipment and auxiliary work for mamlatdar office at mandal, dist.: ahmedabad.-- supplying, installing, testing and commissioning main electric motor driven 20 hp horizontal centrifugal end suction mono block type pump, 900 lpm @ 56 mtr. head , supplying, installing, testing and commissioning of control panel suitable for start and stop of main electrical pump (20 hp) , supplying, installing, testing and commissioning of copper flexible cable frls for 20 hp pump, 3 c x 6 sqmm , supplying, installing, testing and commissioning of dial type pressure guage having 100 mm dial & range of 0-14 kg/cm2 with isolation valve , supplying, installing, testing and commissioning of cast iron butterfly valve conforming to bs 5155 class pn 1.6 rating of size 100 mm , supplying, installing, testing and commissioning of cast iron non-return valve class pn 1.6 rating of sizes , supplying, installing, testing and commissioning of 25 mm dia brass single acting air release valve , supplying, installing, testing and commissioning of forged brass ball valve, screw end type, pn 1.6 rating of sizes 25 mm , supplying, installing, testing and commissioning of ms erw class 'heavy' pipes confirming to is 1239 pt -i heavy grade upto 150 nb & above is: 3589 with painting, with anchor fasteners, bolts nuts, clamps, "u" bolts, ms fittings such as reducers, tees, elbows etc. as per drawings. incl painting the pipe line with coat of synthetic enamel over base coat of red oxide paint , supplying, installing, testing and commissioning of stainless steel single headed oblique pattern hydrant landing valves with 80 mm dia flanged inlet & 63 mm dia female outlet complete with pvc cap , supplying, installing, testing and commissioning of 63 mm dia 15m long non percolating flexible hose (rrl type a) with stainless steel male & female instanteneous type coupling , supplying, installing, testing and commissioning of standard stainless steel branch pipe with nozzle of 20 mm nominal bore outlet suitable to fit with standard instanteneous type 63 mm dia coupling , supplying, installing, testing and commissioning of standard fire hose cabinet wall mounting type having single door opening with necessary locking arrangement by allan key suitable for housing of 1 nos. 15 mtrs. hose pipe & 1 no. branch pipe, ms 18 gauge , supplying, installing, testing and commissioning of wall mounting type first aid fire hose reel with drum, hanging bracket, 30 m x 25 mm dia high pressure hose pipe with 8 mm ss shut off nozzle and all required accessories , supplying, installing, testing and commissioning of fire brigade inlet connection of 2 way with 2 nos. 63 mm dia built in non return valves instantaneous coupling type arranged on 100 mm dia. pipe , supplying, installing, testing and commissioning of fire alarm and pump trigger system as per requirement and specification consisting of following items pump on/off switch , cable for pump on-off switch, 3 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , manual call point (mcp) , hooter , fire alarm panel, conventional type, 2 zone panel with battery backup , cable for mcp, hooter, 2 c x 1.0 sq mm flexible cable with pvc conduit pipe & cable accessories , supplying, installing, testing and commissioning of fire extinguishers of following types co2 type fire extinguisher of capacity 4.5 kg with hanging bracket & accessories , stored pressure type dry chemical powder extinguisher of capacity 6.0 kgs. as per is , 15683 with hanging bracket & accessories , providing and fixing, testing and commissioning of ci y-type strainer with ss mesh conforming to pn 1.6 rating of size , design & engineering, survey charges

State Government

CTN :45487538

23 Jun, 2026 11.87 Lacs

Bengaluru - Karnataka

Tender For supply, errection, commissioning of nitrogen injection fire extinguishing system for 20mva power transformer with the required control cable with 220vdc control at somanahalli receiving station.

CTN :44822218

12 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For bid to ras supply of data acquisition monitoring logging & control system for fire performance studies

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45475064

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for mechanical department - purchase, open cup apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation, closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety: over-temperature cut-off flame safety control

CTN :39517005

11 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For bid to ras corrigendum : upgradation of the existing room intervention facility - a shoot house with designated live fire rooms clearance, judgmental and reflexive honing of skills in encountering and overcoming hostile fire, hostage rescue training etc. the soldiers would go from room to room, clearing it from hostile following sop’s as laid down for such operations. (layout enclosed) (3 firing rooms and 1 control room) , wall construction , rubber panels , ricochet protection , acoustictreatment , panel connection , control room , (a) computer’s racks. (b) radio comn shelfs. (c) glass windows & door for see through facility. (d) dimension 15 x 12 ft. (e) proper lighting system. (f) space for generator set 12 kva. (g) cctv installation , wireless moving target (wmt) , cctv system , drainage system

Central Government And Public Sector

CTN :44612073

11 Jun, 2026 97.68 Lacs

Faridabad - Haryana

Tender For bid to ras providing of custom bid for services - camc for 3 year 1 no integrated rack system data center infrastructure 40 kva it load distributed in 8 server rack 2 network rack with 3 no redundant in row pre cooling system 40 kw other component as per sl no 1 of boq and ..,custom bid for services - camc for 3 year 1 no online ups system consist of 2 no 40 kva ups with 2 no battery bank each-12v65ahx36 no battery component as sl no 2 of annexure-i make model at annexure-ii as per boq and atc,custom bid for services - camc for 3 year of 1 no access control system for 2 no door 10 no rack (component at sl no 3 of annexure-i make model at annexure-ii) as per boq and atc,custom bid for services - camc for 3 year of 1 no fire alarm system including vesda component at sl no 4 of annexure-i make model at annexure-ii as per boq and atc,custom bid for services - camc for 3 year of 1 no rodent repellent system component at sl no 5 of annexure i make model at annexure ii as per boq and atc

State Government

CTN :45431330

15 Jun, 2026 37.61 Lacs

Jodhpur - Rajasthan

Tender For supply and installation or urs at various areas of zone south, jodhpur - providing & laying xlpe insulated & p.v.c. sheathed armoured aluminium cable confirming to is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray(with cable tie) including testing commissioning etc. as required of following size.10.0 sq. mm x 4 core, supply & installation of unified regulation system (urs) for existing street light that meets the following specification.the system must feature a 240mhz dual core processor with gsm/gprs communication capabilities and support for ota firmware updates.it should come with an internal class 1.0 energy metering system that can provide real time data of crucial electric load parameters along with fault and theft alerts.the urs must include remote load scheduling and control functionalities with a feedback time of less than seconds.the enclosure confirms to ip55 standards,and be fire retardant,weatherproof,and rustproof. the system should use a lightweight protocol for secure ,real-time communication and include cloud based software for comprehensive device management and remote control. it should be able to control single phase 5.5kw and 3 phase street light load upto 8.5kw and should come with 2pole/4pole mcb upto 25a/40a at output for short circuit protection .having a 2-year warranty urs will be installed at site as per direction of engineering incharge. (size 570*520*190mm)

Fire Protection Services Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government And Public Sector

State Government