Latest flap door Tenders | Government flap door Tenders

Central Government And Public Sector

CTN :39418083

03 Mar, 2025 NA

Guwahati - Assam

Tender For supply of flap door frame with panel.drawing - rdso drawing no:- wd-90030-s-66, alt -10, item no.- 3. mat. spec. - as per drawing with latest revisions and amendments. [ warranty period: 30 mo nths after the date of delivery ]

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

Corporations And Associations And Others

CTN :39372871

24 Feb, 2025 1.56 Lacs

Multi City - Haryana

Tender For maintenance of staff quarter no 3 at water works, sector-31, gurugram with repairing of brick work, tile work, putty, door shutter, wooden work finishing paint and all other works contingent thereto.

CTN :39100365

24 Feb, 2025 32.15 Lacs

Dehradune - Uttarakhand

Tender For corrigendum : tender for supply of centre table of size 1194 mm x 584 mm x 460 mm , made out of 70x35mm teak wood frame work and 45x45 mm teak wood rnouled legs , top to have 19 mm thick ply with 1mm thick laminated top , edges to have 30mmx30mm teak wood moulding finished with melamine polish all complete (supplier will get the sample approved before supply from estate manager , emu dehradun) , steel almirha large , material of almirah doors m s sheet , sheet thickne ss of door 1.0 mm , sheet thickness of sides , back , top and bottom 1.0 mm , sheet thickness of shelves 1.0 mm , sheet thickness of pedestal in mm 1.0 mm , material of lock brass and finish power coating , number of doors (nos) 2 , door stiffner upto full door height , provided with the almirah doors lock , height (without pedestal) (in mm) (+/- 10 min) 2000 , width (+/- 7 mm) 910 milimeter , depth (+/- 5 mm) 486 millimeter , inside shelves , pedestal height 125mm and width 100mm. (supplier will get the sample approved before supply , from estate manager , emu dehradun) , dinning chair made of second class teak wood , seat cusion 40 density 75 mm thick , upholstery cotton fabric 450 gsm , with back rest with cushion , material of frame wood , chair height (overall) +10mm 1050mm , backrest width +10mm 450 , width of seat +10mm 450 , depth of seal in of seat in mm (+/- 10 mm) 400 , heght of seat in mm (+/- 5 mm) 425 , seat finish cushioned , all exposed wooden surfaces will be melamine polished all as specified (supplier will get the sample approved before supply , from estate manager , emu dehradun) , sofa of two seater made out of 50 x 25 mm second class hard wood frame and upholstered 100 mm rubber foam in seat , back rest of 50 mm rubber foam fully upholstered with wooden arms , teak wood finish melamine polish etc all complete godrej interio aristocrat or equivalent . (supplier will get the sample approved before supply , from estate manager , emu dehradun) , sofa of single seater made out of 50 x 25 mm second class hard wood frame and upholstered 100 mm rubber foam in seat , back rest of 50 mm rubber foam fully upholstered with wooden arms , teak wood finish melamine polish etc all complete godrej interio aristocrat or equivalent . (supplier will get the sample approved before supply , from estate manager , emu dehradun) , utility table of size 900 mm x 900 mm x 460 mm , made out of 35x45mm teak wood frame work and 45x45 mm teak wood rnouled legs , top to have 19 mm thick ply with 1mm thick laminated top , edges to have 30mmx30mm teak wood moulding finished with melamine polish all complete (supplier will get the sample approved before supply from estate manager , emu dehradun) , supply of single bed of size 1950 x 930 x 325 mm made out of teak wood side of size 120 x 30 mm and foot board with 75 x 25 mm second class teak wood frame covered with 4 mm thick one side teak ply and other side 6 mm thick commercial ply on bed back side with 40 x 9 mm thick teak wood lipping on edges and 50 x 25 mm support of second class hard wood and 12 mm thick commercial ply on bed top with melamine polish on all exposed surfaces and primer coat on rest of surfaces etc. as per directed by engineer-in-charge all complete. (supplier will get the sample approved before supply , from estate manager , emu dehradun) , key box with key hooks , acrylic covered lockable key box of size 40inchx40inch with 50 nos of key hooks covered with acrylic shutter all as specified (supplier will get the sample approved before supply from estate manager , emu dehradun) , notice board , width of board in mm 1200 mm , colour (front/ display layer) green , height of board in mm 900mm , front cover material of board acrylic (minimum 2 mm thickness) , rear panel material of board galvanised iron sheet , overall pinability depth of board in mm 8 millimeter , core material thickness in mm(n greater equal 9) 9 millimeter , orientation portrait / landscape , type of front cover with lockable front cover , d

Central Government / Public Sector

CTN :39376449

12 Mar, 2025 NA

Secunderabad - Telangana

Tender For supply of flap door arrangement for boxn & bost variants wagon.

Central Government/Public Sector

CTN :39376584

10 Mar, 2025 NA

Dahod - Gujarat

Tender For supply of flap door chainless coter rivet as per r

Central Government/Public Sector

CTN :39377087

19 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of flap door chainless cotter

Central Government/Public Sector

CTN :39349563

25 Feb, 2025 NA

Erode - Tamil Nadu

Tender For supply of : door hinge for bcna flap door to drg.no.wd-90030-s-66, item-16. material specification as per dr awing. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39359241

20 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of flap door chainless cotter for boxn & boxnhl variant wagon to rdso drg. no. wd-23 018-s-01 alt.2 or latest item 8 & wd-23018-s-02 alt.2 or latest item 9 [ warranty period: 30 months after the date of delivery ]

CTN :39318064

05 Mar, 2025 NA

Rourkela - Odisha

Tender For supply of flap door chainless cotter rivet to rdso's drg no-wd-90007-s-1,item no- 2,alt.no.16 (sixt een) or latest. [ warranty period: 30 months after the date of delivery ]

Flap Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors