Latest fluid warming machine Tenders | Government fluid warming machine Tenders

CTN :38567662

02 Dec, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of micro controller based electronic speed indicating & recording system withou t indicator to rdso specn. no.mp-0-3700-07 (latest rev). suitable for demu/dpc 1600 hp. make/bra nd: laxven, medha or telpro. tchnical specification : 1. speed scale range: 0 -120 kmph, 2. nomina l voltage : 110 v dc. the equipment shall consist of the following items. : 1. speed sensor - 1 no. 2. recorder-cum-indicator - 1 no. 3. junction box-- 1 no. 4. connection cables-1 set of 02 nos, 5. mounting accessories- 1 set. [ warranty period: 30 months after the date of delivery ]

CTN :38074379

04 Jan, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of phase sequence indicator , rotating rectifier assembly , generator control unit type iver 2nm , automatic voltage regulator , kvr-2 , rotating rectifier assembly for 350kw , 500kw alternator , automatic voltage regulator , kvar-4 , automatic voltage regulator type ievr 2n , regulator avr ievr-2 industrial electronic voltage , bearing nde-6310 , wound stator with free leads , auto manual switch 10a , 240v , 1 pole , automatic voltage regulator-ievr2n , hrc fuse links-415v ac , 6a ns 6 , hrc fuse links-415v ac , 2a ns 2 , rotating rectifier assembly , bearing de side for motor -6310c3

Central Government/Public Sector

CTN :38569577

02 Jan, 2025 NA

Bangalore - Karnataka

Tender For design, supply, installation, calibration & demo visit of load digital pressure indicator for spring testing machine operating voltage 90 to 260 volts ac, operated din size accuracy + /- 0.25 % of fsr excitation 10 volts dc modes supported peak / hold reset suitable for model no. 1168-a2-lv of syscon make with cee compliance calibrated along with nabl certification. make: syscon, wika, rexoroth, pansonic, druck, amphenol, or similar

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

Central Government And Public Sector

CTN :38057097

26 Dec, 2024 37.25 Lacs

Darjeeling - West Bengal

Tender For corrigendum : supply of installation of damaged spare parts of plc and scada system - control transformer 1kva , motor protection cuircuit breaker, range- 51 -70a , breaker handle with knob, siemens 3vt series , panel door lock for power pack , ethrnet switch 5-port unmanaged, ports- 5 unmanged type aux. supply- 24vdc , smps din rail mounted 24v dc 10a, output- 24v dc, 10a din rail mounted type , star delta timer, 0 -60 sec , panel fan, 220v ac, size 6 inch , mcb 2.0 amp. single pole , mcb 4 a single pole , single pole mcb 6 amp , mcb 4 a double pole , dc mcb double pole 220 v dc 06 amp , tripple pole mcb 4a, c04 , mcb tripple pole, c curve, 6amp , relay 8-pin with base, 8-pin 24v dc with base , space heater, rating-500w 230v ac , pressure gauge, analog type, range- 0-500kgf per sq. cm , tank oil gauge, tank mounted direct measuring , directional solenoid valve, operating pressure- 315 kgf per sq. cm coil voltage-24v dc , gate position sensor for radial gate, e1-type range 0- 360 degree, analog output 4 - 20 ma , indication light - blue, indication lamp 22.5 mm 220v ac blue , differential pressure transmitter, two wire 4 -20 ma dc output with hart , level transmitter accuracy 5-10 mm , gate position indicator 5 digit 0.56 inch display 21 , voltmeter 0- 500v - analog , push button red with nc add on , ammeter, 0 -250a analog , indication light - red, indication lamp 22.5mm 220vac red , indication light - yellow, indication lamp 22.5mm 220v ac yellow , indication light - green, indication lamp 22.5mm 220v ac green , jumbo display size 6.5 inch usb ports 2.0 x 1, 3.0 x 1 , push button yellow with no add on, size 22.5 mm , push button blue with no add on, size 22.5 mm , push button green with no add on, size 22.5 mm , push button black with no add on, size 22.5 mm , emergency push button, size 22.5 mm , phase preventer relay system ac mode auto , utp cable cat-5e , cable 1.5 sqmm 4c flexible 100m bundle , 1024 tags and ddls of scada system , control terminal block, 2.5sq.mm , service engineer charges , traveling charges , freight charges

State Government

CTN :38501323

19 Dec, 2024 NA

Gandhinagar - Gujarat

Tender For supply of various consumable material for cpem at gtps. - industrial padestal fan , wall mounted fan , wolf make air blower , hand drill machine size 13mm , hpmv lamp 125 watt screw type , ht pvc insulation tape size 0.18 mm x25 mm x 65 , mtr length , polymide terminal block kut 25 , polymide terminal block kut 35 , polymide terminal block kut 50 , polyamide power terminal block dpbb 70 , polyamide power terminal block dpbb 120 , l&t make power contactor type ml-4 with 2 no , + 2 nc aux. contact, coil voltage 220v ac, ac-3 , 70 amp. rating, cat. no.-ss 90910 , crc-226 contact cleaner in 415 ml/300 gram , spray bottle. , oks 2621 safe l.c. spray, contact cleaner , spray for live circuits ( 500 ml spray bottel) , light gray paint size 4 liters light gray paint , size >> 1 liter. , painting brush size 4" (100 mm) , painting brush size 2" (50 mm) , rusting clean brush, wire brush round 1.1/2" , justy nail/khila size 3" long , spare coil for l&t make ml2 power cantactor , coil voltage 220 volt ac cat. no. ss 90545. , hydraulic crimping tool with die set , (hexagonal type). capacity : - 50 sqmm to 400 , sqmm. , 15 amp combination set,combind plug & switch , with indicator 15 amp. , fan capacitor 2.5 me & r.b

CTN :37577778

20 Dec, 2024 5.05 Crore

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of set of wear parts , set of wear parts , threaded spindle , shaft seal , spring plate , coupling , thermocouple , calibration sleeve , pointer , supporting ring , plc binary input/output module 07dc92 , pressure piece , thermocouple , axial compensator , sealing ring , mounting device forsealing rings , turbine nozzle ring complete , compression spring , cooliing system turbine disc complete , supporting device , o-ring seal , sealing cover , compressor side , gripper , measuring device , bellow , retaining ring , eccentric ring , sleeve , compression spring , strap , bush , o-ring seal , plate for adjustable wrench , shackle a0.6 , set of wear parts , main starting valve , complete , ring , grip handle , fitting and removing device , outlet valve seat ring , seal , pump impeller , washer , o-ring seal , o-ring seal , compression spring , holding device , seal , compression spring , sealing ring , retaining ring , counter-thrust bearing , supporting device , oil scraper ring , set of wear parts , o-ring seal , sealing ring , support , o-ring seal , shaft , retaining ring , pressure gauge , stud , support cup , seal , set of seals , set of wear parts , compensation disk , retaining ring , set of wear parts , sealing ring , overspeed relay , type 2 , seal ring , fuel injection valve , complete , adapter , fuel pipe , lock nut , seal disk , support , step plate , rope guide , hexagon nut , compressing ring , sealing ring , assembly taper , lower bearing shell , plc kt98 , cpu , valve cone piece , indicator pipe , interface relay , o-ring seal , o-ring seal , o-ring seal , butting ring , set of wear parts , guide shoe , set pump element , grinding tool , seal , o-ring seal , seal , o-ring seal , bush , o-ring seal , o-ring seal , driver unit em300 , plc analog i/o module 07ac91 , valve cone piece , compressing ring , buffle screw with pin , sealing ring , o-ring seal , indicator valve , sealing ring , sealing ring , thrust pad , holding device , screwed socket , ratchet puller , o-ring seal , insulation , fuel injection pipe , measuring gauge (measuring device) , deep groove ball bearing , o-ring seal , insert , inlet valve seat ring , o-ring seal , o-ring seal , o-ring seal , upper bearing shell , plc analog input module 07ai91 , sealing ring , set of wear parts , sealing air pipe , set of wear parts , assembly kit for nozlle ring , water jacket , tab washer , set of gasket , set of wearing part soleniod valve , lybrinth ring , hexagon bolt , speed transmitter , lock washer , set of wearing parts , locating ring , terminal box , locking ring , nozzle holder( with gasket) , shaft seal , mechanical shaft seal , analog input module 07 ai 91 adjusted/programmed(rfno a501) , pressure gauge (ft) , roller bolt (ft) , molykote (hb) , sealing paste (hb) , guide bolt , pressure spring (nt) , bearing bush (ft) , temperatumre sensor (ft) , proller bolt (zb) , thrust piece (ft) , cylinder pin (nt) , inlet cam (ft) , bearing bush (ft) , lock nut (nt) , valve piston (nt) , nut (ft) , pack of wear parts (ts) , plc analog i/o module 07ac91 , temperatumre sensor (ft) , lock nut , voltage relay (ref no 3a1) , staring valve cone (ft) , roller (zb) , lubricant (hb) , emergency stop button (ref no 50s3) , hexagon bolt , lock washeer pair , lock washer pair

corporations/Associations/Others

CTN :38379898

19 Dec, 2024 NA

Hyderabad-T - Telangana

Tender For supply of banner make alarm tower light: tl50h tower light: 2-color sealed loud audible indicator; voltage: 18- 30 , banner make alarm tower light: cordset a code m12 single ended, 4-pin staright female connector

Central Government And Public Sector

CTN :38299726

20 Dec, 2024 NA

Nagpur - Maharashtra

Tender For goods, supply, installation, and commissioning of a microcontroller-based electronic speed indicating and recording system for track machines. the system to comply with rdso specification no. mp.0.3700.07, rev-7, august 2017, and includes flash memory storage of up to 90 days (internal memory ). specifications include a speed range of 0-120 kmph and an operating voltage of 24 vdc. each set inclu des the items listed below, ( rdso specification no. mp.0.3700-07). 1) recording cum indicator unit (rci)- 01 no. 2) speed indicator -01 no. 3) speed sensor/pulse generator-01 no. 4) junction box with adopter pla te-01 no. 5) connecting cable-01 set of 04 nos.(rci to ind cable length 35 meters) 6) mounting accessori es as per requirement make: laxven systems, medha servo drive, autometers alliance or other rdso ap proved vendors. warranty: as per irs condition of contract. note: the installation & commissioning of the complete set has to be executed at site of working of track machines within secr jurisdiction. [ warranty period: 30 months after the date of delivery ]

CTN :38442298

25 Dec, 2024 NA

Multi City - Multi State

Tender For supply, erection, testing & commissioning of 500 kva outdoor, plinth mounted, oil immersed, non-sealed type (transformer tank body and cover are bolted) distribution transformer, 500 kva rating, 11kv/415v, 3-phase, 50 hz, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled, off-load tap changer for variation of hv voltage from +5% to -10% in steps of 2.5%, with all standard fittings as per clause 20.1 of is 1180 (part 1) and oil temperature indicator & winding temperature indicators, drain-cum- sampling valve (3/4? nominal size thread,is:554) of steel with plug, energy efficiency level- 3 & above, conforming to is 1180 (part 1): 2014 with amendment nos. 1,2,3 & 4. following has to be submitted along with supply of material:- (i) type test report as per is: 1180 (part 1) of transformer having same rating, make (& model if any) and design from nabl accredited lab. (ii) routine test certificates as per is: 1180 (part 1). (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1180(part 1) accepted make : andrew yule/aeg/crompton greaves/kirloskar electric co./abb /siemens/ schneider electric or equivalent.

Fluid Warming Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

corporations/Associations/Others

Central Government And Public Sector