Latest flushing valve Tenders | Government flushing valve Tenders

CTN :38552183

01 Jan, 2025 95.83 Lacs

Uttarakannada - Karnataka

Tender For custom bid for services - repair refurbishment of door hatches and miscellaneous fittings onboard in ship at nsrykar-1 services repair of wt doors (material ms) - repair/renewal of, coaming of doors, structural coaming, straightening of bent doors., 36 nos, 2 repair/renewal of retainer hook, locks, auto locks 36 nos, 3 repair/renewal of hinges pins, hinge assembly 36 nos, 4 repair/renewal of rubber beading and removal & fitment. 36 nos, 5 conduct of chalk test. 36 nos, 6 repair of wt hatches (material ms)- repair/renewal coaming of, hatches, structural coaming, frames, straightening of bent hatches, 52 nos, 7 repair/renewal of locks, auto locks 52 nos, 8 repair/renewal of hinges pins, hinge assembly 52 nos, 9 repair/renewal of rubber beading and removal & fitment. 52 nos, 10 conduct of chalk test. 52 nos, 11 fitment of additional spring mechanism. 52 nos, 12 fitment of new water tight hatch (supplied by navy) 52 nos, 13 repair of nwt doors (material al)- repair/renewal of coaming of, door, structural coaming, frames, 105 nos, 14 repair/renewal of locking mechanism, hinges 105 nos, 15 repair/renewal of handles, tower bolts, stoppers, latches 105 nos, 16 fitment of nwt door 46 nos, 17 repair/renewal of rubber beading and removal & fitment. 105 nos, 18 port holes (material ms/al)- repair/renewal of hinges, locking, mechanism, 50 nos, 19 repair/renewal of rubber beading 50 nos, 20 repair/renewal of metal coaming 50 nos, 21 conduct of chalk test. 50 nos, 22 spares: wt doors (material ms)- retainer hook on bulkhead 36 nos, 23 door lock assembly 36 nos, 24 locking handle assembly 36 nos, 25 hinge pins 36 nos, 26 hinge assembly 36 nos, 27 wedges 36 nos, 28 rubber beading 36 nos, 29 wt hatches (material ms) - hatch lock assembly 52 nos, 30 locking handle assembly 52 nos, 31 hinge pins 52 nos, 32 hinge assembly 52 nos, 33 wedges 52 nos, 34 spring mechanism 52 nos, 35 rubber beading 52 nos, 36 nwt doors (material al)- locking mechanism with spares 105 nos, 37 hinges 105 nos, 38 handles 105 nos, 39 latches 105 nos, 40 nwt door 46 nos, 41 rubber beading 105 nos, 42 port holes (material ms/al) -hinges 50 nos, 43 port hole cover 50 nos, 44 rubber beading 50 nos, 45 repair of pipe lines. material - cu-ni (material supplied by, contractor). (a) upto 3 inch dia, 180 rmt, 46 (b) 4 inch dia. 135 rmt, 47 renewal of pipe lines. material - cu-ni (material supplied by, contractor). (a) upto 3 inch dia, 90 rmt, 48 (b) 4 inch dia. 65 rmt, 49 cleaning of soil, domestic sea water pipe lines, followed by pressure, test and restoration of external paint scheme post preparation., 435 rmt, 50 strip, examine and refit following valves. job includes overhauling., renewal of worn out leather seating and repairs as necessary. (a), discharge valves., (i) <= 100mm, 24 nos, 51 (ii) >= 100mm 7 nos, 52 (b) storm valve. (i) <= 100mm 13 nos, 53 (ii) 100mm. 9 nos, 54 repair of isolating valve, dia 50mm. 32 nos, 55 renewal of isolating valve, dia 50mm. 18 nos, 56 repair of valves. (a) reducer. 19 nos, 57 renewal of valves. (a) reducer. 18 nos, 58 (b) relief valve. 7 nos, 59 (c) dry protection valve. 9 nos, 60 repair of electromagnetic bleed valves of citadel, dia 100mm. 13 nos, 61 renewal of electromagnetic bleed valves of citadel, dia 100mm. 6 nos, 62 repair of pipe lines. material - ms. (a) upto 2 inch dia. 170 rmt, 63 (b) 2 inch to 5 inch dia. 145 rmt, 64 renewal of pipe lines. material - ms. (a) upto 2 inch dia. 95 rmt, 65 (b) 2 inch to 5 inch dia. 65 rmt, 66 repair of imo connector/ coupling for sewage discharge to barges., material - ms., 6 nos, 67 manufacturing of adaptor blanks for domestic sea water pipe line of, following size. material - brass, dia 50mm. (material by contractor), 170 nos, 68 manufacture deck drain strainer. material-brass. 145 nos, 69 fitment of nelson valve and removal of existing foot pedal valve, includes following., (a) fitment of nelson valves (140 wcs) (supply by navy)., 95 nos, 70 (b) renewal of pipes. material - cu-ni (90-1

CTN :38199056

18 Dec, 2024 NA

Jalandhar - Punjab

Tender For bid to ras corrigendum : tender for supply of lv6/mt1 10548353 5120-000358 jack hyd lifting 8 ton closed height 240 , lv6-mt14 10307146 2640-000036 valve pneu tyre clamping type tr 76 , lv7/stln 10324017 3030-72-0471160 fan belt engine , lv7/t-815 10315771 150-130-022-004 repair kit for air pressure governor , lv7/stln 10347849 6220-004486 stop light vehicular/tail lamp vehicular , lv7/stln 10347853 6220-004502 light indicator , lv7/tata 10453200 t065-6000-0126 cartridge lub.oil filter , lv7/maruti 10454977 15811m830a1 pipe , fuel (pump to filter) , lv7/maruti 10443013 36272m80000 lens back up lh , lv7/tata 10487203 17672-03-000 filter fuel , lv7/tata 10579606 270754440115 blinker lamp lh 24v

CTN :38556378

02 Jan, 2025 NA

Delhi - Delhi

Tender For supply of bearing , clutch bearing , outer handle , clutch rel bearing , repair kit , regulator 12v , pressure plate , rectifier plate , alternator rotor , deration tank , oil seal , bty cut off switch , clutch plate , equalizer rep kit , transfer seal , union , regulator 24v , bearing wheel , emergency valve rep kit , stg booster rep kit , temp sensor

CTN :38519157

31 Dec, 2024 NA

Pithoragarh - Uttarakhand

Tender For supply of mt spares - air filter element , kit pad assy front , suspension bush kit , sparking plug , front brake shoe , coil assy ignition , cylinder assy rear wheel rh , shoe set rear brake , eng mounting pad , solenoid valve assy , drive shaft , pressure release valve , cam plate , supply pump , 352 dia clutch disc assy , bush king pin , axual roller brg , cross , pump fuel transfer , armature assy , brush carrier assy , major repair kit air comp , clutch slave cylinder

Central Government/Public Sector

CTN :38538590

06 Jan, 2025 NA

Multi City - Multi State

Tender For supply of pushing disc suitable for push type flushing valve (brass) 25mm of kpr, disc size- 45mm diax8mm having splined hole for sprindle fitment, make kpr or equivalent

State Government

CTN :38533420

01 Jan, 2025 5.00 Lacs

Jammu - Jammu And Kashmir

Tender For supply of piston with pin,piston rings,begin bearing std,connecting rod,e o h gasket,timing belt,m oil filter,valve inlet and exhaust,valve guide,thermo state valve,main bearing std,connecting rod bush,oil pump seal,timing tenshioner bearing,oil pump assy,water body with gasket,head assy,rocher plate,rocher set 16 pcs,shallage tube big,hose pipe,coolant,cylinder linner,cranck thrust,heater plug,clutch with pressure plate,cranck oil seal,altinator cutout special repair 60 lucas,fly wheel sensor,temp sensor,clutch cylinder lower

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

CTN :38505405

30 Dec, 2024 NA

Multi City - Multi State

Tender For supply of filter element x 325 insert for lube oil,filter element x 400 insert for control oil,repair kit for lo cooler,set of sealing kit o rings for pressure relief valve item no 40,set of sealing kit o rings for pressure relief valve item no 70,gasket for built on sea water pump,sealing ring for built-on sea water pump,mechanical seal for built on sea water pump,grooved ball bearing for built on sea water pump,grooved ball bearing for built on sea water pump,circlip for built on sea water pump,set of seal kit o rings for built on primary oil pump,set of seal kit o rings for built on secondary oil pump,repair kit for starting stand by pump for control and lube oil,service kit for pressure accumulating valve, item no. 65,service kit for pressure accumulating valve, item no. 66,set of o rings for lo filter and control oil filter 0025 2 or 0026 2,set of o rings for lo filter and control oil filter 0025 2 or 0026 2,repair kit for electric stand by sea water pump,element for temperature regulating valve,service kit sealin

CTN :38488742

28 Dec, 2024 NA

Jalandhar - Punjab

Tender For supply of lv7/t-815 10323424 5306-72-0421904 releasing screw (443 961 120 039) , lv7/tata 10471509 2614-6250-0104 assy face side lh , lv7/stln(vf) 10329083 3110-72-0472398 bearing, ball, annular , lv7/maruti 10452336 5340-135147 handle door inside lh , lv6-mt6 10303882 000-428-0035j brake hose , lv7/tata 10578430 283954440110 assy motorised head lamp complete 24v rh , lv7/hmv/8x8/al/sv 10558519 f2210200 isolator switch , lv7/stln(vf) 10340986 2940-72-0309856 water filter , lv7/stln 10326368 p-1020651 major repair kit , lv7/tata 10479295 2654-7230-0124 assy outer handle lh , lv6/mt7 10466394 3110-002012 bearing tappered roller , lv7/tata 10484926 2527-5010-8242 assy pressure valve cap (7psi) , lv7/tata 10488432 2085-4680-0101 assy hose , lv7/stln(vf) 10323177 2460300005 rollers

Central Government/Public Sector

CTN :38445291

07 Jan, 2025 NA

East Singhbhum - Jharkhand

Tender For rc for sandvik make cone crusher spares - rc for sandvik make cone crusher spares, (a) spares for cone crusher, model cs-430, sl. no. 6116 & a4731:liner-pinion shaft arm, part no.-442.7915-01, liner-narrow arm, part no.-442.7914-01, liner, part no.-442.9035-01, side liner, 12 x 480 x 445, part no.-442.8864-01, side liner, 12 x 635 x 449, part no.-442.8865-01, side liner, 12 x 565 x 250, part no.-442.8866-01, side liner, 12 x 412 x 215, part no.-442.8867-01, side liner, 12 x 247 x 238, part no.-442.8868-01, side liner, 12 x 220 x 115, part no.-442.8869-01, arm liner, part no.-442.8451-01, main shaft sleeve, part no.-442.7913-01, mantle b m1, part no.-442.8471-01, head nut with burning ring, part no.-442.7912-00, burning ring, part no.-442-7911-01, spider cap, part no.-442.8520-00, spider bushing, part no.-442.6473-01, seal ring, part no.-442.6470-01, concave ring lower ec-ec2 m1, part no.-442.8477-00, concave ring ec second m1, part no.-452.1952-901, concave segment ec-ec2 m1, part no.-442.8484-00, air filter p10102 r1/4" + ins, part no.-912.0114-00, filter cartridge p x 37-13-2 mic25, part no.-912.0126-00, filter cartridge hc 2 , part no.-912.0129-00, air filter complete, part no.-912.0138-00, bottom shell bushing , part no.-452.4190-001, eccentric bushing throw 16 + 20 + 25 + 3, part no.-452.4516-001, piston wearing plate, part no.-442.7894-01, step washer, part no.-442.7894-01, o- ring, part no.-873.0157-00, o- ring, part no.-873.1275-00, oil seal ring, part no.-873.1097-00, retaining bar, part no.-442.8020-01, main shaft step, part no.-442.7895-01, inner head nut , part no.-442.7918-01, dust seal ring, part no.-442.8017-01, o ring 379, 3 x 5, 7 sms 1586, part no.-873.0833-00, mechnical seal 3884087, part no.-906.0142-00, pump unit rb5 40l/m 400vy50, part no.-442.3300-91a, control valve 4.5 mpa, part no.-902.0747-00, valve hawe mvex 6f-7.5 mpa, part no.-902.0656-00, relief valve 0.7 mpa, part no.-602.0717-00, pump hpi p3 ban 2004 l10, part no.-906.0270-00, pump albin rb5-01v 38-82874, part no.-906.0140-00, over pressure unit, part no.-442.8642-00, seal ring inner, part no.-442.7931-01, ring, part no.-442.7932-01, spider cap screw, part no.-840.0069-00, spider cap washer, part no.-847.0120-00, screw for spider bushing, part no.-840.0080-00, washer for spider bushing, part no.-847.0132-00, grease tribol 3020/1000 tin 18 kgs, part no.-825.0182-00, casting compound, part no.-831.0016-00, main shaft step dowel pin, part no.-853.0118-00, dust seal retainer screw (50 long), part no.-840.0068-00, dust seal retainer screw (60 long), part no.-840.0070-00, scraper , part no.-442.8022-01, scrapper retainer pt. , part no.-442.8021-01, mainshaft sleeve (new design), part no.-bg00215626, mainshaft cover, part no.-bg00514356, mainshaft cover allen screw, part no.-841.0658-00, bottomshell liner kit, part no.-442.8870-00, locating bar, part no.-452.4194-001, loacting bar screws, part no.-841.0019-00, shim t-0.1, part no.-442.7933-01, shim t-0.3, part no.-442.7933-02, shim t-0.5, part no.-442.7933-03, shim t-0.7, part no.-442.7933-04, locating bar kit, part no.-452.5797-901, eccentric wearing plate, part no.-452.4188-001, dust collar, part no.-442.7929-01, dust collar gasket, part no.-442.7934-01, dust collar washer, part no.-847.0016-00, pinion shaft, part no.-442.9936-01, shaft key, part no.-857.0046-00, retaining ring sga 80 (pinion), part no.-855.0103-00, oil seal ring (inner & outer), part no.-873.1097-00, bearing cover (inner), part no.-442.7951-01, bearing cover (outer), part no.-442.7950-01, filter plug g 1/4 f14 -brass breather, part no.-900.0717-00, gasket t=0.5 (outer cover), part no.-442.7956-01, gasket t=0.8 (outer cover), part no.-442.7956-02, gasket 0.8 (inner cover), part no.-442.7957-01, gasket t=0.5 (pinion housing to bottom shell), part no.-442.7953-01, gasket t=0.8 (pinion housing to bottom shell), part no.-442.7953-02, gasket t=1.5 (pinion housing to bottom shell), part no.-442.7953-03, pinion shaft repair kit, par

Flushing Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector