Latest forklift spares scrap Tenders | Government forklift spares scrap Tenders

CTN :45213177

08 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For bid to ras providing of repair and overhauling service - repair of water pump of hyster fork lifter h155ft; repair of water pump of hyster fork lifter h155ft; yes; buyer premises

Central Government/Public Sector

CTN :45392709

29 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of side wall complete,roof assembly & end wall complete for ts vande metro dtc note:-(1) wherever raw material mentioned as astm a 666-10 type 201ln ? hard is not to be used.in place of above grade, rawmaterial to rdso specification ck-201 (xcrni12) is to be used. (2) side wall assly to be manufactured as per design letter no. md48131 dated 22/05/2025, as per drawing: mp23vbdtc version 4, packing instruction: returnable & re-usable metallic pallet item should be supplied in returnable & re-usable pallet made of steel. the design of the pallet should be : " water and fire proof. " rust free. " having good strength to weight ratio. " suitable for stacking in several layers, compatible witheach other when stacked. " able to withstand the rough handling of common logistic systems such as fork lifter, cranes etc. " able to facilitate the storing, handling and unloading with minimum labour and time. " having the interior of the pallet lined with suitable material (like frp ) so as to prevent damage to the item being transported. while stacking the item inside the pallet, there should be minimum use of disposable packing. " the pallet should have firm's logo for identification. firm should also indicate pl no., description of item on the pallet. note : 1.for packing the individual item(s), the use of material which are not environment friendly such as wood/polyethene/plastic is prohibited, however the environment friendly plastic can be used. 2.the item should be packed in such a way that it should not rub during transportation. the in-transit damage, if any, shall be at cost of the supplier. 3.the design to be got approved by the firm fromcde/rcf before initiating manufacturing. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45396402

08 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of carline, as per drawing: mp19carvp version 2, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45404408

10 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply and installation of single inlet centrifugal fan suitable for 3-phase, 415v ac, along with ducting arrangement for pantry in vande bharat trainsets. special note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated.01.04.2025, as per drawing: edts331, rev. a, corr-1,2 and 3. (type-iii), packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall beas per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45407106

01 Jul, 2026 NA

Kapurthala - Punjab

Tender For set of carline for memu dmc 3-phase coaches with high rise panto & tcas facility, as per drawing: mp26cardmc version 0, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to beplaced between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along withset of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45424335

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of 60kva transformer, as per drawing: rdso/pe/spec/ac/0080-2007,(rev-2) alongwith doc.edml-225 rev-0., packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage ofpo, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall be as per iso/iec 18004 model2 and thedata shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45405172

04 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of panel for shovan chair car coaches for bangladesh railways, as per drawing: edts-463, rev-nil, packing instruction: electrical panels to be protected with transparent biodegradable polythene bag/sheets thickness of 0.1 mm or an antistatic bag of 350 to 400 gauge (100 micron approx.) on all sides of panel &panel shall be packed in transport worthy wooden cage. bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden batons of size 100x100mm of suitable length to facilitate lifting by fork lifter &secure properly with suitable packing to avoid in-transit damage. each panel to be packed in transport worthy wooden cage of suitable dimensions made out of wooden strip of 20x100 mm size. gap between each strips should not be more then 100mm.a list should be pasted on each wooden cage showing order no, pl no, description, drg /spec. no, qty, firm'name &address, consignee name, date of dispatch, top bottom arrow mark etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a)name of the manufacturer b)purchase order number c)purchase order date d)unique serial number (or lot number for bulk items) of the manufacturer or e)date of manufacture f)delivery challan no. g)delivery challan date 2. the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government / Public Sector

CTN :45392884

17 Jun, 2026 NA

Kazipet - Telangana

Tender For supply of following oils required for maintenance of ace fork lifter of 05 ton capacity as detailed: 1) engine oil -40 ltrs ,2) tc oil - 20 ltrs,3) gear oil - 20 ltrs,4) hydraulic oil-40 ltrs, 5) coolant oil - 06 ltrs ,6) brake oil (1/2 ltr) -02 nos. [ warranty period: 30 months after the date of delivery ] ]

CTN :45099008

02 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For bid to ras bid to ras supply of spl vehs jcb hydra crane bobcat fork lifter tractor trailer river boat c c - earth mover , hydra crane , bobcat , fork lifter , river boat , tractor and trailer

Central Government/Public Sector

CTN :45393758

05 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of set of frp side wall panels for lhb slr hog coaches (31-seater). follow colour shade as per l.no. md46271 dated 18.01.2021., as per drawing: mplsplwslrd version 2, packing instruction: frp ceiling sheet/side wall panels/frp component self adhesive biodegradable plastic lamination sheet to be provided on each component. projected metallicparts to be protected with plastic/nylon/frpcaps/proper wrapping of biodegradable bubble sheet from all the sides. each component to be packed in biodegradable bubble sheet all around with proper tapping & then to be placed in cardboard box followed by 3nylon strips tightened from both sides. then collective packs of components to be packed in wooden cage made from wooden strips of size 100x20mm & gap between each strip should not be more than 100mm.on the wooden crate base 3 wooden pegs of size100x100mm (along the length) to be provided for ease in handling with fork lifter. all loose items of a set to be packed separately in cardboard box with list of loose items pasted on each box and collective packs of item to be packed in wooden cage made from wooden . roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden boxes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing should have indication like 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that one complete coach set can be easly identified.the maximum weight of the wooden crate should not be more than 200 kgs. a list should be pasted on each wooden crate showing order no, pl no. description of item,drg no/spec no/set list no. with version, qty, firm's name & address,date of despatch etc. [ warranty period: 84 months after the date of delivery ] ]

Forklift Spares Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors