Latest frp gate Tenders | Government frp gate Tenders

CTN :39835527

15 Apr, 2025 NA

Lohit - Arunachal Pradesh

Tender For supply of ceiling rose 3 pin 5 amp isi marked , s p 5 or 6 amp one way modular switch , s p 5 or 6 amp two way modular switch , s p 15 or 16 amp one way modular switch , 3 pin 5 or 6 amp modular socket outlet , 6 pin 15 or 16 amp modular socket outlet , mcb 10 amp single pole , mcb 16 amp single pole , mcb 32 amp double pole , mcb db box 16 way , insulated copper earthing wire 1 sqmm green colour 90 mtr roll , batten holder , wall mixer three in one , cp shower hose pipe 1 pt 5 mtr long , cp over head shower with arm , cp hand shower with flexible arm , sintex tank 1000 ltr capacity double ply , cp extension nipple 1 pt 5 inch long , cp flange , cp waist jali 75 mm dia , cp waist jali 100 mm dia , cpvc solvent 118 ml pack , padestel wash basin pot including all fittings complete , indian type w c long make , looking mirror 450 x 600 mm and 6 mm thick without frame , ptmt glass self , peg rail ss , round mirror holder bracket pack of four 8 mm , pvc cowl 4 inch dia , pvc long bend , paint white matt emulsion for ceiling , interior acrylic emulsion paint , stainer 200 ml pack cream colour , wall primer white , red oxide primer , paint enamel golden brown , painting brush 1 inch , painting brush 4 inch , painting roller , wood primer , putty applicater , white cement , 6 mm thick plywood 8 feet x 4 feet , 12 mm thick plywood 8 feet x 4 feet , fevicol hitex , touch wood varnish , wire mesh 4 feet width 15 m long , ss hinges 75 mm long , screw 3 by 4 inch ss , screw 1 inch ss , screw 1 pt 5 inch ss , screw 3 inch ss , ppgi sheet green 3 pt 5 m x 1 pt 8 m , ppgi ridge , non skid floor tiles 600 x 600mm or 300 x 300 mm , wall tile 600 x 300 mm , wooden scanteling 5 inch x 4 inch x 12 feet teak wood , wooden scanteling 4 inch x 3 inch x 12 feet teak wood , wooden planks 10 inch x 1 pt 5 feet x 12 feet teak wood , exhaust fan 230 mm dia , ceiling fan 1200 mm , water gyeser 20 ltr cap , tile cutter blade 4 inch bosch , tile cutter machine , ms square pipe 40 mm x 40 mm x 4 mm , cgi sheet cutter scissor , glass cutter , 35 mm thick factory made solid panel pvc door shutter with solid pvc chaukhat of single piece extruded profile decorative finished wood grain finished including all door fittings complete

CTN :39826848

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For clean room (d block - iitm rp) - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shroude

CTN :39832256

08 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For tender for clean room - partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-50 mm thick ppgi/ ppgi wall panel for coloumn, partition paneling works double skin modular wall panel system made of 0.6 mm thick precoatedsheet on both sides with puf as infill of density 40 2 kg/m3, double tongue and groove joints as per standard manufacturing specification.-100 mm thick ppgi/ ppgi wall panel for coloumn, wall paneling of ppgi/ppgi of 100 mm thick with 40 mm of glass wool panel, desnity 100kg.m3, non combustable, penling color as per architect choice. with necessary double door of equal size as per site condition. fittings complete all. panel of three side with roof necessary duct cut otu with proper seal to be done as per site for sound insulation., panel thickness : 100 mm ppgi/ppgi wall raiser ( 700 width x depth less than 80 mm), walkable ceiling panels ppgi/ppgi -double skin modular clean room walkable ceiling panels made with 0.6 mm pre coated sheets on both side with puf as infill of density of 40 2 kgs/m3. -50 mm thick ppgi/ ppgi ceiling panels, cleanroom doors -50mm thick flush frame made of 1.2 mm thick gpsp powder coated sheet, 0.8 mm thick pu powder coated gpsp sheet with honey comb kraft paper as infill of 46mm thk shutter suitable for 50mm thk frame, including all the accessories like double glazed veiw glass, hardwares like push plate, kick plate, non concealed door closure. ss d handle, ss ball bearing butt hinges, both side key operated lock & key. concealed drop seal per leaf and concealed flushbolt for double leaf door etc.- single leaf door - size 1000 x2100 mm, double leaf door size 1800mm x 2100 mm, double leaf door size 2000mm x 2100 mm, view panels -double glazed view 5 mm toughned glass with flush design, 50 mm thick flush view panel made of 1 mm thick gi frame with puf as infill in- between the frame., coving & corners -male & female r-70 powder coated coving, 2d / 3d internal powder coated corner coves, external 90 degree powder coated coving, bottom track for panel, silicon sealent for panel to panel joint, supply, installation of air shower- microflow make mfd-as -1200 model. inner dimension- 900x1220x1950 (h), over dimension of -1800x1320x2200(h), cabinet, platform stainless steel-304, of 1 person capacity, gi powder coated with flush double glazing , hardware like door closure, d handle, ball bearing butt hinches door with vision panel, pre filter - flange type of 90% efficiency, pressure drop -6 to 8 mm, hepa filter box type, 00.007 % efficiency, pressure drop of 25 mm of w.c, adjustablke nozzle of 30mm, as per manufacuter specification , control motor by dol starter, doors by electronmahnectic inter locking, overload protection, thermal relay,emergency off- push button. complete all. consider micro flow, design , supply, providing of esd mat flooring of homogeneous composition with block conductive layer sandwhich between two antistatic layers. of bs 2050 /1978is 3462 /1986 governing specification. thickness of the materials 2 mm +/-0.1mm( 0.5mm sandwhich conductive layer), electrical propertie : surface resistivity 108 -1010ohms/sq. decay time: less than 2 seconds. including copper strip below mat to connec the earth bus complete all. with an thermo welding process complete all., panels as per technical specifications & schematic diagram., supply, installation, testing and commissioning of indoor type lt switchboards, floor mounting type, bottom/top entry. refer enclosed sld. enclosure: compartmentalized single front crca (cold rolled cold annealed sheet steel) doors:2mm body:2mm gland:3mm covers and partitions:1.6mm ip class for indoor/ip55 with weather proof enclosure for outdoor bus bars: electrolytic grade conductivity as per standard is 5082 bus bar material: as per sld bus bar joints: shrouded/tinned

State Government

CTN :39824314

18 Apr, 2025 20.00 Lacs

Shahdol - Madhya Pradesh

Tender For tender for supply of materials fy-2025-26 - window, door pks[kv ventilation etc. material made including material (iron), rolling shutter (sq. metre) in standard gauge, profile sheet (isi mark) 18 gauge, tresses/purlin (tata isi), iron gate of prescribed size as per estimate for installation in plantation site, iron board of prescribed size as per estimate for installation in plantation site, gi sheet 1 mm is, window, door frame (chokhat)- sal/bija/satkatha wood frame, window, door panels veneered flat pressed three layer graded wood particle board window door panel as per is 3097 grade-i, gi wire isi mark, turpentine oil isi mark, paint branded (color as per requirement) (isi mark), oil bound distemper isi mark, emulsion isi mark, wall putty isi mark in 20 kg bag, kota stone 20-25 mm thick, unels khila steel isi mark, asphalt, ochre, lime, tape 02 meter measuring tape with weighing department seal, tape 10 meter measuring tape with weighing department seal, marker pen for writing on wood

State Government

CTN :39812687

28 Mar, 2025 NA

Shimla - Himachal Pradesh

Tender For special repair to judicial court complex at chakkar shimla (sh: provide & fixing of almunium door frame & shutter & covering of open space in pocso gallery at chakkar court shimla).

Central Government/Public Sector

CTN :39272255

01 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For lwlrrm shell kit (a) lwlrrm - roof, sidewall and end wall one coach set of roof, 2 mm side wall and end wall for lwlrrm coaches with noise reduction feature 1) roof c omplete to drg. no. 53816018, alt 'c' - 1 no 2) final roof element to drg. no. 83416016, alt ' a'-1 no 3) roof end part complete to drg. no.83416017, alt 'a' -1 no 4) end roof assy to drg no. 58116066, alt 'g' - 1 no, 5) ss trough arrangement to drg no. 53816023 alt 'a'- 1 no 6) side wall right complete to drg. no. lp14110, alt a anx. 6 -1 no 7) side wall left complete to drg.n o. lp14111, alt a anx.6 -1 no 8) sidewall npp-end right complete to drg.no.1.10113.0.20.110. 004, alt b anx.3 -1 no 9) side wall coach end complete to drg.no. 1.10113.0.20.110.003, alt b anx.4 -1 no 10) side wall pp end left cpl to drg.no. 1.10113.0.20.110.005, alt nil anx.3 -1 n o 11) side wall pp end right cpl to drg .no. 1.11012.0.20.110.003, alt nil anx.3 -1 no 12) end wall complete for lhb power car to drg. no. 1.11012.0.20.120.003, alt a anx.9 - 1 no with l atest detail drgs 1.11012.0.20.120.004-alt b anx-4 and mi007721_a_anx-2 13)end wall compl ete for lhb power car to drg. no. lp15103, alt nil anx-2 -1no 14) door cut out to drawin g no. lr10295-1 no & lr10296, alt a-1 no, 72914089, alt c- 1 no, 729 14 091, alt c- 1 no, 15) car l ine nos 1.11012.0.20.110.007, alt r - 1 no and 1.11012.0.20.110.008, alt r - 1 no. the end wall sha ll be assembled with cover sheet and shutter complete to item no.1 & 2 of drg.no.3.1011 3.0.20.120.183, br and item 6,7,8,10,12 of drg.no.2.10113.0.76.300.002, alt c and tail lamp br acket to drg no.2.10113.0.10.300.001. the firm shall fulfill the requirement as per.icf/md/ specn.200, issue status-01, rev-04 with amendment no-01. for end wall the firm shall fulf il the requirement as per icf/md/spec-315,issue status-01, rev.00. firm has to supply roof and sidewall without applying etch primer and the firm has to apply etch primer on roof and sidewall in icf after shell assembly. (b) body shell items & partitions for lwlrrm shell kit supply and insta llation of body shell items and partition frames for lwlrrm coaches to drg. no. 1) aaa1 0488, alt. c- 2 nos (rain water gutter) 2) 2 11012.0.20.110.100, alt.nil-2 nos.(rain water gutter) 3) lp 10107, alt. nil - 2 nos,(sheeting) 4) lp10136, alt d anx-4 -1no. (welding parts car body) 5) lp10125 alt b anx-10, item-33 - 14 nos.(ledge) 6) lp10108, alt a anx-1- 8 nos.(duct assy) 7) aaa10278, alt . nil-4 nos.(hand hold arrangement) 8) 1.11012.0.03.095.001 alt a -1 no (w/p in u/f incl. 53810070 & 53810035) 9) lp10139, anx-5 - 1 no (partition frames) the above items to be supplied as set and install the same at the body shell assembly stage to assembly drg.no. lp10125, alt b anx -10 (c) under frame arrangement -613-lp11103 alt 'd' anx-7 the manufacturing facility as pe r icf/md/spec-147, issue status-01 rev.02 with amendment no.01 special condition : a) -packin g as per icf/j&t/misc-2201, alt 'e', safety instruction as per icf/j&t/sk-1867, alt. 'nil' -packin g as per icf/j&t/sk-1809, alt 'a'. b) - packing condition as per icf/j&t/sk-1865, alt "a". installa tion required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. supply rates a nd installation rates to be quoted separately. c)packing condition as per drg.no.icf/j&t /misc-2487, alt 'b' the underframe should be supplied as normal side up and side bearer s ide down. [safety item ]

Central Government/Public Sector

CTN :39818321

03 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of glass shutter arrangement for driver's cab door. to icf drg. no. dmu/dpc-5-3-003, alt. ' b' [ warranty period: 30 months after the date of delivery ]

CTN :39774927

10 Apr, 2025 NA

Sonitpur - Assam

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold or ambuja or ultratech or acc or jkj dalmia , stone boulder 9inch to 12inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded . , coarse aggregate 40mm graded , water proofing compund conforming to is 2645 2003 make pidilite or dr fixit or fevicol , pbs roll 20m long width of 0 point 9mtr isi marked with min weight of 34 kgs per roll , cement based paint snowcem make berger or asian or nerolac , synthetic paint enamelled og conforming to is 5 ur 2004 make asian or berqer or nerolac , synthetic paint enamelled brown confirming to is 5 2004 make berger or asian or nerolac , anti corrosive red oxide zinc chromate primer conforming to is 5 2004 make asian or berger or nerolac , loop holes 1000 x 300 mm make tata or sail or jsw , ventilator steel 300 x 450 mm will be fabricated using isa 35 x 35 x 5mm for outer frame and isa 30 x 30x 3mm for shutter frame with blace sheet as per ts , ms binding wire , ismb hot rolled ms 125 4000 mm long make tata or sail or jsw , isms hot rolled ms 125 1200 mm long make tata or sail or jsw , srt 1840 x 613x 180 mm 2 mm thick ms sheet hot rolled steel with nuts bolt incl one coat of red oxide make tata or sail or jsw , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm and door shutter frame of isa 35x35x5mm and all stiffner as per ts , hdpe sand bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per bag , mild steel bar of size 6 to 8 mm dia conforming to is 432 part ll 1982 make tata or sail or jsw , prefeb folding double sleeping bunks madeof ms columns 65x 65x6mm and ms plate form made of isa 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per ts , polythene sheet colour less and weight of sheet shall be not less than 70gm or sqm , wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 x 0 point 026m , wooden scantling various sizes , nails various size , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12mm dia and 300mm long , gi pipe 20 mm dia light grade make jindal or tata or kalinga , gi pipe 40 mm dia light grade make jindal or tata or kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make presto or polycab or finolex , testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw , aluminium strips 25x3mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe make jindal or tata or kalinga , galvanised iron strip 32x6mm

CTN :39792081

27 Mar, 2025 2.51 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , sarojini nagar , new delhi. =- acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply

CTN :39792136

26 Mar, 2025 3.04 Lacs

Delhi - Delhi

Tender For supply of material for day to day maintenance services under the jurisdiction of postal civil enquiry , rk puram , new delhi. - acrylic emulsion paint, premium acrylic smooth exterior paint, aluminium composite panel, aluminium extrusions, aluminum sections, board & plywood, ceramic/rectified tiles, cp fittings, cpvc pipes, designer coloured cement concrete floor tiles for external used / concrete paver blocks., epoxy primer & paints, float glass, flush doors (isi mark only), galvanized/stainless steel anchor, fasteners, gun metal gate valve, gypsum board false ceiling, hardner, hydraulic door closer, hydraulic floor spring, laminate, melamine polish, m. s. pipe, marine plywood / bwp ply, oil bound distemper, sanitary fittings, plastic connection pipe, ply wood, pre-coated gi sheet for roofing, polymer modified cementitious grout, pre-laminated particle board is :, 12823 (gr-i, type-ii), primer, pvc rain water pipe & fitting, is:13592 type a, pvc shutter, pvc tank (isi marked), r. c. c. pipes (np-2), solid plastic seat cover for ewc, stainless steel, stainless steel sink with or without draining board., structural silicon sealant, structural steel section, synthetic enamel paints, textured exterior wall paint, towel ring/towel rod/towel, rack., tubular section windows, tmt bars, vitrified tiles, waste pipe, water proofing compound, (liquid), wire mesh, white cement, wall putty, work stations/ modular furniture, stoneware pipe and gully trap, pvc flushing system, tactile tiles, plastic emulsion paint, supply at site of g.i. pipes (15mm dia. nominal bore), supply of u-pvc (working pressure 4kg/cm2) single socketed pipe 110mm diameter, supply of gi union 15mm nominal bore, supply of putty for glass panes., supply of u-pvc bend 110mm bend, supply of u-pvc pipe clip 110mm, providing at site of ptmt waste coupling for wash basin and sink, of approved quality and colour.a) waste coupling 40mm of 79mm length and 62mm breadth weighing not less than 45gms., supply at site of float/froasted glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), supply at site of flexible (coil shaped) pvc waste pipe for sink and washbasin having length not less than 700 mm i/c pvc waste fittings, 32mm nominal diameter, 40mm nominal diameter, supply at site of ptmt bib cock 15 mm nominal bore, 86 mm long, weighing not less than 88 gms, supply at site of ptmt stop cock of approved quality and colour., 15 mm nominal bore, 86mm long. weighing not less than 88 gms., galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, supply at site of ptmt ball cock 15mm complete with epoxy coated aluminium rod & h.d. ball, supply at site of ptmt pillar cock of approved quality and colour., a) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, supply at site of vitreous china flat back wash basin 450x300 mm, supply of oxidised mild steel handles 100 mm, supply of oxidised mild steel tower bolt (barrel type) 200x10mm, supply of bright fininshed or black enameled mild steel bolts and nuts 50x6 mm, supply at site of polyethylene water storage tank with cover and suitable locking arrangement, supply at site of white vitreous china orissa pattern w.c. pan of size 580x440 mm, supply at site of 100 mm s.c.i. trap with vent heel for w.c, supply at site of flushing cistern p.v.c 10 lts capacity ( low level ) (white) ( with fittings, accessories and flush pipe), supply at site of pvc connection pipe 450 mm with brass unions and collar bush, supply of coarse sand, supply of stone aggregate (single size) : 20 mm nominal size, providing at site of bright fininshed or black enameled mild steel screws 50 mm, providing at site of bright fininshed or black enameled mild steel screws 40 mm, providing at site of bright fininshed or black enameled mild steel screws 25 mm, providing at site of bright fininshed or black enameled mild steel screws 20 mm, supply of cp brass bib cock 15 mm nominal bore, supply of cp b

Frp Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector