Latest fuel card Tenders | Government fuel card Tenders

Central Government/Public Sector

CTN :39043824

11 Feb, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of hydraulic horizontal tensile testing machine -150 ton as per specification enclosed [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39171113

27 Feb, 2025 1.80 Crore

Secunderabad - Telangana

Tender For replacement of security equipment installations at dmde office complex under ge i rnd kanchanbagh, hyderabad - supply and fixing of electric fencing - 520 rm as specified below as per site requirement including taking down existing fencing with all connected accessories viz. energizer, boom barrier, hydraulic tyre killer, turnstile gate, swing lane barrier, fencing posts, fencing wire, insulators, door frame metal detector etc, complete all as specified and directed by engineer-in-charge., (a) general description(a) this scope involves, design, supply, installation, testing and commissioning of a non-lethal high security. electrical fencing for the purpose of deterrence, detection, and movement control of people / unwarranted trespassing into the premises for 520-meters perimeter length.(b) anyone who touches the power fencing when the system is armed shall be repelled by a short, sharp, painful, but safe pulsed dc high voltage shock. alarms shall be generated when someone touches, tries to climb through or tampers with the power fencing system., (c) the electric fencing shall be divided into two zones.(d) this system should be able to alert security personnel of an attempted intrusion and identify the zone around the perimeter of the site.(e) the electric fence is to be installed on the existing wall and the height of the fence will be 1.1 meters from top of the wall with 11 nos. of fence wires having 100mm gap between adjacent wires and it measure 1mtr.(f) electric fence posts are to be hot dip galvanized., (g) distance between strain fence posts spacing shall not exceed 50-meter nominal.(h) distance between intermediate fence posts spacing shall not exceed 3-meter nominal.(j) the electric fence shall incorporate uv stabilized intermediate post insulators.(k) warning signs shall be mounted around the fence line at intervals not exceeding 10m or at every turn on the physical fence.(l) dual zone fence energizer shall be installed to create 2 zones at site., (m) one dual zone led keypad shall be connected to fence energizer for local control and programming purpose.(n) a touchscreen controller should be placed in control room. fence energizer should communicate with touch screen controller over rs485 network.(o) the space between adjacent wires on the electric fence shall be no more than 10cm.(p) anti-climb configuration at strain points shall be provided. electric fence wire shall be looped around the strain post and connected back onto itself.(q) all high voltage impulse wiring shall be run in conduit separate from any other wiring.(r) the fence energizer shall be mounted in the weatherproof enclosure.(s) the energizer should comply with iec 60335-2-76 and is302-2-76 standards., (b) technical specification (electric fence system):energizerthe fence energizer should have the following minimum features: energizer should be dual zone with independent zone control. energizer should communicate with control room on rs485 network. energizer should have lcd display with background colours which changes according to the status of the energizer. green colour should indicate that all is fine, orange indicate that attention is required and red indicates an alarm condition., energizer should display the following information when specific codes are inserted from keypad: fence health on a scale of 1 to 9 for each zone independently, fence output voltage, fence return voltage, energy stored, capacity used and battery voltage. output energy 3.7 joule with 500 ohms load. pulse interval 1 sec. pulse duration should be less than 0.1ms. energizer should have apt - adaptive power technology functionality. which means the energizers should offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. this maximises the power on the fence and minimises false alarms., individual high voltage transformer for each zone. magnetic tag switch should be provided for on/off the energizer without

Central Government/Public Sector

CTN :39223659

15 Feb, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of m1060320608-gas chem carbon dioxide 99.8 percentage 25-35kg , hydraulic testing , painting charges , de greasing charges , vacuumising charges , purging charges , valve replacement , cap replacement , s s spindle replacement , drilling out broken spindle , gland nut safety nut replacement

CTN :39224271

26 Feb, 2025 NA

Alwar - Rajasthan

Tender For supply of self- reliance and sustenance of hydraulic through establishment of hydraulic testing and developmen

CTN :38662017

11 Feb, 2025 11.58 Lacs

Uttarkashi - Uttarakhand

Tender For corrigendum : providing of custom bid for services - hiring of nabl approved bidderagencylaboratory for testing of hydraulic transformer oil used in 60mw naitwar mori hydro power station mori uttarkashi uttarakhand for a period of two year on rate contract basis pcd 208

CTN :38782320

21 Feb, 2025 4.33 Crore

Jodhpur - Rajasthan

Tender For corrigendum : civil lab equipments - digital compression testing machine capacity, hydraulic bench, digital direct shear test apparatus, 2kn, total station with stand and all accessories, gnss based survey, dgps (digital global positioning system), cube mould 150 mm, cube mould 70.6mm, digital electronic balance 10 kg capacity, electronic balance capacity 30 kg, vicat apparatus:, flash and fire point apparatus, reynold s apparatus, vernier transit theodolite, universal oven, permeability apparatus (is: 2720 part 17), mortar cube vibrating machine, b. o. d. incubator, curing tank, torsion testing machine, rockwell hardness testing machine, metallurgical microscope, compression testing machine, aggregate impact testing machine, digital planimeter, ductility test apparatus

CTN :37243364

07 Feb, 2025 NA

Delhi - Delhi

Tender For bid to ras supply of hydraulic testing plant (for hose testing)

Central Government/Public Sector

CTN :39195831

25 Feb, 2025 13.89 Lacs

East Singhbhum - Jharkhand

Tender For annual civil maintenance work at turamdih mines - earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing specification and direction of the engineer. earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr. disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 km. and up to any lift includind cost of all labours and equipments. surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering but excluding cost of cement. supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. m20 rcc pcc taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. providing and fixing 125 into 63 mm m. s. hinges of approved quality and make. providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 300 into 10 mm providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 150 into10 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete. providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or sh

Central Government/Public Sector

CTN :39069584

11 Feb, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : supply of 100000000001camc of cranes -35 nos-refer annexure i,ii,iii,iv attached at atc , 100000000002camc of manual rolling shutters -65 nos-refer annexure i,ii,iii,iv attached at atc , 100000000003camc of motorised rolling shutter -51 n-refer annexure i,ii,iii,iv attached at atc , 100000000004 hiring of desert cooler -1st year-refer annexure i,ii,iii,iv attached at atc , 100000000005 hiring of desert cooler - 2nd year-refer annexure i,ii,iii,iv attached at atc , 100000000006 hiring of hydraulic excavator-refer annexure i,ii,iii,iv attached at atc , 100000000007 load testing and certification of cranes-refer annexure i,ii,iii,iv attached at atc , 100000000008 load testing and certification of fork lif-refer annexure i,ii,iii,iv attached at atc , 100000000009load testing and certification of bow shac-refer annexure i,ii,iii,iv attached at atc , 100000000010 load testing and certification of d- shack- refer annexure i,ii,iii,iv attached at atc , 100000000011 load testing and certification of metal sl-refer annexure i,ii,iii,iv attached at atc , 100000000012load testing and certification of master r-refer annexure i,ii,iii,iv attached at atc , 100000000013external examination pressure vessel- refer annexure i,ii,iii,iv attached at atc , 100000000014hydrostatic t and c of oxygen-refer annexure i,ii,iii,iv attached at atc , 100000000015 hydrostatic t and c of pres -45 to 3000-refer annexure i,ii,iii,iv attached at atc , 100000000016 hydrostatic t and c of pre -15000 lt-refer annexure i,ii,iii,iv attached at atc , 100000000017hydrostatic t and c of water tank-refer annexure i,ii,iii,iv attached at atc , 100000000018 one time repairing-refer annexure i,ii,iii,iv attached at atc , 100000000019amc of png system at centeen-refer annexure i,ii,iii,iv attached at atc

Central Government And Public Sector

CTN :39203217

11 Feb, 2025 NA

Lumding - Assam

Tender For supply & installation of hydraulic insulator testing machine for 25 kv composite & porcelain insulators as per attached rdso specification no.ti/spc/ohe/instest/0090 (02/2009) with a&c slip no. 01 (rdso specification attached)

Fuel Card Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector