Latest fusion welding Tenders | Government fusion welding Tenders

CTN :40491562

17 Jun, 2025 NA

Delhi - Delhi

Tender For supply of welding glass white size 4 inch , welding glass black size 4 inch , welding lead or cable e 35sqmm h.o.r.f.hr 90 600 amp , welding electrode holder , 10 mm single core electrical copper wire black colour length 15 mtr , 10 mm single core electrical copper wire red colour length 15 mtr , ring terminal crimp m4 10 mm2 , heavy duty crocodile clip with red and black colour marking jaw c type , welding gloves leather , electrical copper wire 8 mm single core , electrical copper wire 10 mm single core , 10 mm single core electrical copper wire black colour , 10 mm single core electrical copper wire red colour , hydrometer gravity tester , da gas regulator , oxygen gas regulator , automatic welding helmet , welding rod 3.15mm ms , welding rod ms 08 no , welding rod ss 3.15 mm , cutting rod 3.15 mm , cutting rod 08 no , armoured welding rod 3.15 mm , cast iron welding rod 3.15mm , brazing rod 2.0 mm , bronze flux , portable welding holder small size , portable welding cable 12 mm , portable welding male adaptor bid number/ & ( * ) : gem/2025/b/6278135 dated/ + : 27-05-2025 bid document/ 2 2 1 / 26

corporations/Associations/Others

CTN :40492388

06 Jun, 2025 NA

Luckwada - Chhattisgarh

Tender For supply of welding electrodes and accessories - ms electrode , low hydrogen ms electrodes , champering electrode , hard facing electrodes , ss electrode , welding electrode , cutting electrode , cast iron electrode , ss electrode 5.00mm , hard facing electrode , bronze rod , hose -black , hose - red , gas welding rod copper , cutting nozel for a16 torch , holder electrodes , cutting nozel , aluminium welding cable

corporations/Associations/Others

CTN :40078927

04 Jun, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For corrigendum : custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

CTN :40468346

02 Jun, 2025 NA

Vellore - Tamil Nadu

Tender For purchase of welding accessories esab note: manufacturer/ authorized dealers only should participate in e-tender and valid dealership certificate should be send along with quotation - welding accessories make: esab only3 1/4" x 4 1/4" welding white glass. , 3 1/4" x 4 1/4" welding colour glass. make: esab only, welding electrode holder heavy duty make: esabamps: 600, welders leather hand gloves size: 18" long x lmake: esab only, asbestos hand gloves size: 18" long make: esab only, spark lighter make: esab only, coper welding cable 90 sq.mm 600 amps make: esab only, cuttozen no: 5 gas cutting torch for lpg make: esab only, double braided id 8 mm rubber hose i) black or blue colour for oxygen gas make: esab only, double braided id 8 mm rubber hose ii) red colour for lpg gas make: esab only, brass lpg gas pressure regulator with 3/8" coupling single stage for industrial purpose make: esab onlymodel: lpg 18c gas: lpgpressure: 0.5 to 17 kg/cm material: brasstype: high pressure, lpg gas cutting nozzles for cutogen 5make: esab only1/32" (p8), 3/64" (p12), 1/16" (p16), 5/64" (p20), gas hose clamp (ss)

State Government

CTN :40448517

09 Jun, 2025 3.70 Lacs

Raichur - Karnataka

Tender For procurement of special welding electrodes for bm-2 of rtps - welding electrode e7018-1, size 4.00 x 450mm_, e-7018-1, size 3.15 x 450mm_, tig filler_ wire d2.4 rt 2.25 c, tig filler wire d2.4 rt 1/2 mo_, welding electrode ss e9018-b3, size 4mm, welding electrode ss e9018-b3, size 3.15mm_, welding electrode ss e8018-b2 4.00mm , welding electrode ss e8018-b2 size 3.15mm_, tig welding electrodes 2.40mm dia x 150mm long size, nozzle - set of 10 nos, electrode - set of 10 nos

CTN :40468846

14 Jun, 2025 NA

Kamrup - Assam

Tender For supply of welding cable , electrode , gas cutting nozzle , welding brazing nozzle , oxygen regulator , acetylene regulator , weldcraft steel lighter for welding , plazma cutting nozzle , plasma cutting heat shield , hypertherm retaining cap , hypertherm plasma cutter air filter 109302 , plasma cutting electrode , regulator for argon gas , co2 regulator with heat exchanger , mig wire dia 0.8mm , mig wire dia 1.2 mm , mig wire dia 1.0 mm , mig tip dia 0.8 mm , mig tip dia 1.0 mm , mig tip dia 1.2 mm , contact tip holder for mig , mig gas diffuser 36kd , ceramic nozzle for tig welding 3620 , ceramic nozzle for tig welding 3621 , tungsten for tig welding grey colour , tungsten for tig welding red colour , electrode holder , hand grinding machine key , mig nozzle , smooth wheel , cutting wheel , rough wheel grinding wheel , carbon brass , tongs , chipping hammer , ss electrode , tig welding machine set , tig welding torch set , welding helmet , welding hand gloves , tig collect 1.0mm , tig collect 2.4 mm

CTN :39038230

06 Jun, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

CTN :40431847

05 Jun, 2025 26.45 Lacs

Multi City - Andhra Pradesh

Tender For providing electrical supply and fixing windows to new municipal office building in piduguralla municipality under special grant any government/general funds - 1 flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. 2 flooring with non - skid red or white full body ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete. 3 providing skirting to internal walls to 15cm height/risers of steps with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of cm (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, 4 dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. 5 providing impervious coat to exposed rcc roof slab surface with c.m.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per s.s. 6 supplying and fixing of unplasticised poly vinyl chloride (upvc) sliding windows three track -two glass shutters sliding and one mesh shutter duly manufactured using upvc reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with tpv gaskets/ epdm weathering seal resistant accessories like locking system 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work. 7 supply,delivery and labour charges for fixing of 48" (1200mm) cei

Central Government And Public Sector

CTN :40388192

09 Jun, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of welding electrode e 309 mo-15 4.0 mm , ss welding electrode e-309, mo-15, size 3.15mm , ss welding electrode e-309, mo-15, size 2.5mm , welding electrodes e-7018, size 4.0 mm , welding electrodes e-7018, size 3.15 mm , welding electrodes e-7018, size 2.5 mm , copper coated gauging rod 6mm , ss tig welding wire 308l

CTN :40187415

21 May, 2025 8.18 Lacs

Ramgarh - Jharkhand

Tender For bid to ras supply of welding electrode - electrode lomelt 205 5mm , electrode 4mm 350mm lowhyd prima7018-1 , electrode 3.15mm 450mm hvy ctd low hyd , electrode gouging 4mm fcutting 200- 300a , electrode gouging 2-4mm cutng , electrode prima ht103 3.15mm , electrode prima ht 103 4mm , electrode ss aws er-309 4mm 350mm

Fusion Welding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government And Public Sector