Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr & bcnm1 wagons no as following: [1] er 10029661434 boxnm1 [2] ser 25079660153 boxnr [3] ser 10079663945 boxnm1 [4] nfr 10059560035 boxnm1 [5] er 10029501013 boxnm1 [6] cr 30019060856 bcnm1 [7] er 30029024589 bcnm1 [8] ser 10079662221 boxnr [9] special repair 10069760456 boxnm1 [10] cr 25019660502 boxnr condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (103.560 mt) is the lot quantity (103.560 mt) as mentioned in the catalogue. [2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnm1, boxnr & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr & bcnm1 wagons no as following: [1] scr 10099563072 boxnm1 [2] ser 25079661846 boxnr [3] er 30029024138 bcnm1 [4] ser 10079767490 boxnm1 [5] ser 10079666038 boxnm1 [6] scr 25099760451 boxnr [7] cr 10019660515 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (80.120 mt) is the lot quantity (80.120 mt) as mentioned in the catalogue. [2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund, or proportionate return of sale value shall be entertained.[4].if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5].no dispute regarding variation in weight shall be entertained after e-auction sale.[6].before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnm1, boxnr & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 & 02 are fitted with 22w(m) casnub bogie which are to be sold with wagon.
Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; as per rfp; buyer - auger, dutch hand hoe, hari hari knife, long handle haes, garden hand tools, garden hoes, garden rakes, garden/digging fork, garden/digging spade, rabbiting spade, hand screens/sieves, onion hoe, knapsack sprayer, leaf rake, levelers, garden pruning saw, pruners, pruning knife, secateurs, specialty spades (shovel), soil scoop, sprinkler irrigation unit, trowels, watering can, charts/pictures, related to health hazards, charts/pictures, related to tincture fodine, charts/pictures related to safety measure, charts/pictures related to health hazards., models of sprinklers irrigation, bio-fertilizer, farmyard manure, fertilizer, gunny bags, sanitizers, seeds of various agriculture crops (as per curriculum)
Tender For auction sale of others - released and unserviceable steel lattice towers (flood light tower) under sse/w/bmy at different locations as1. exchange yard in between mast no. 851/15-1&2 2. near f-cabin. weight 5.80 mt. under sse/w/durg 1. steel tower no.2 on pf no.2&3 at durg station (ngp end), km 866/190 between mast no.866/8 to 866/10 2. steel tower no.3 near pulling point, durg, between mast no.864/36 to 864/38. weight -6.246 mt under sse/w/byt 1. baikunth (bkth) -2 nos weight -3.24 mt total weights 15.286 mt (a) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.(b)) post auction no representation shall be entertained. (c) the lot to be sold on as is where is basis. (d) lots to be sold and delivered on actual weight basis in any govt. approved road weigh bridge. (e)1. safety briefing: conduct a thorough safety briefing to all the personnel involved. ii. securing the area: temporary barricading shall be provided on all four sides of lattice tower for suitable working area and to restrict unauthorized access to the site. where not feasible, alternative measures shall be adopted such as deputing personnel to avoid unauthorized entry, warning tapes or boards. continuous supervision of electrical and engineering supervisor shall be adopted during dismantling of lattice tower; it must be ensured that area around the tower is clear and free from any obstruction. iii. equipment preparation: necessary equipment required: (a) climbing stairs (generally available with the lattice tower) (b) electrical operated cutting tools (hand grinder, saws) with suitable generator set. (c) lifting equipment (rope, pulleys etc.) (d) personal protective equipment (safety helmet, safety belt, protective glasses, hand gloves, jacket etc.) (e) any other requisite equipment to complete the job.
Tender For supply of plumbring items - 20 mm , socket 32 mm , socket 25 mm , socket 20 mm , tee 32mm , tee 25 mm , tee 20 mm , reducer 32mm x 25 mm , reducer 25mm x 20mm , pipe clamp 20mm , pipe clamp 25mm , pipe clamp 32mm , union 20 mm , cross over 15mm , cross over 20mm , cross over 25mm , solvent cement 250ml , butt hinges 75mm , butt hinges 125mm , sliding door bolt 300x16mm , sliding door bolt 250x10mm , aluminium tower bolt 100mm , aluminium tower bolt 150mm , aluminium tower bolt 300mm , godrej hydraulic door closer , cut off wheel 107mm pack of 25 , welding rod 3 point 15mm packet 90 pcs , welding rod 2 point 50mm packet 90 pcs , heavy duty sds drill bit 8mm , heavy duty sds drill bit 10mm , heavy duty sds drill bit 12mm , heavy duty sds drill bit 16mm , bosch 2608580803 holesaw set , stainless steel door handle 150mm , 65mm round padlock 7 levers , stainless steel welding rod 2 point 5 mm 2kg pack , 12 inch hacksaw frame , hacksaw blade 30x25mm pack of 10 , pipe threader die set 15mm to 25mm set of 3 , pipe threader die set as per ts , combination plier 210mm , screw driver 300x10x1 point 5mm , screw driver 300x8x1 point 2mm , screw driver 250x6x0 point 8mm , screw driver 200x8x1 point 2mm , chisels with rubber grip 250mm , chisels with rubber grip 235mm , black drywall screws phillips type 19mm pack of 1000 , black drywall screws phillips type 25mm pack of 500 , black drywall screws phillips type 32mm pack of 500 , black drywall screws phillips type 38mm pack of 500 , bosch professional 10 piece hss r metal drill bit set , bosch professional wood drill bit set 5 pcs as per ts , jon bhandari tools four slot wood drill bit set carbon steel auger bits with hex shank 10mm 12mm 14mm , pipe wrench 450mm , pipe wrench 600mm , 8 inch adjustable wrench , 12 inch adjustable wrench , pipe wrench 12 inch , sink multi water pipe wrench , shovel , pick axe , garden spade , 12 teeth hand cultivator rake , pvc braided water hose 20mm , rain coat , safety shoes , hand riveter gun , sink coupling 40mm , wash basin coupling 32mm , waste pipe pvc 30 inch , connection pipe 600mm pack of 2 , pvc plug 15mm , ss grating 2 piece set 5 inch , sink mixer , basin mixer , inner head for faucets 15mm star type , inner head for faucets 20mm star type , long nose bib cock 15 mm , angle cock , pvc seat cover european type closet , butterfly stainless steel toilet jet or bidet , pvc 10 ltr flushing cistern , health faucet , european type water closet one piece , european type water closet , hand glove rubber
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr & bcnm1 wagons no as following: [1] er 10029661434 boxnm1 [2] ser 25079660153 boxnr [3] ser 10079663945 boxnm1 [4] nfr 10059560035 boxnm1 [5] er 10029501013 boxnm1 [6] cr 30019060856 bcnm1 [7] er 30029024589 bcnm1 [8] ser 10079662221 boxnr [9] special repair 10069760456 boxnm1 [10] cr 25019660502 boxnr condition:-[1] cutting is allowed for loading facilities only. [2] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [3] to be sold without all available excluded fittings as follows:- (i) for boxnm1, boxnr & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.
Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr & bcnm1 wagons no as following: [1] scr 10099563072 boxnm1 [2] ser 25079661846 boxnr [3] er 30029024138 bcnm1 [4] ser 10079767490 boxnm1 [5] ser 10079666038 boxnm1 [6] scr 25099760451 boxnr [7] cr 10019660515 boxnm1 condition:-[1] cutting is allowed for loading facilities only. [2] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [3] to be sold without all available excluded fittings as follows:- (i) for boxnm1, boxnr & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) sl no. 01 & 02 are fitted with 22w(m) casnub bogie which are to be sold with wagon.