Latest gas filling machine Tenders | Government gas filling machine Tenders

CTN :40845287

10 Jul, 2025 NA

Radhanaga - Maharashtra

Tender For supply, installation and commissioning of airless spray-painting machine. [ warranty period: 30 months after the date of delivery ]

CTN :40960541

10 Jul, 2025 NA

Radhanaga - Maharashtra

Tender For supply, installation and commissioning of airless spray-painting machine. [ warranty period: 30 months after the date of delivery ]

CTN :40566700

07 Jul, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : tender for supply of digital clamp meter (600 amp , ) , digital battery tester 13ct 700 , hydro meter , battery pole die +ve , -ve , alternator test bench , 1/4 inch square drive matrix socket set(46 pcs) , multimeter 600v (ac/dc) , refracto meter for def checking 6 in 1 function , alternator regulator tester (vegas) v 414 , safety goggles , torx key set -kth95 (9nos) , distilled water plant (aqua works (3000 watts (5 ltr /hr) , lathe carbide inserts cutting tool for machine steel parts(tnmg 331- maus) , insert cutting tool holder , magnise cnc tools holder(6/7/8/10/12mm lathe boring bar set ccmt carbide insert) , cnc lathe turning tools holder mgehr 1212-2 12x100mm boring bar 10pcs mgmn 200-g carbide inserts high hardness cutter dz10 , cobalt step drill bit spiral size 3mm to 25mm , hss drill bit 1 mm to 6mm 10pcs set , carbide threding inserts gbj-10 pcs 16 erag 60 , carbide threding inserts gbj-10 pcs 16 irag 60 3/8 inch , insert holder(16er ag60 , 16 irag 60 gold) , tap & die (8x1.25mm) , tap & die (10x1.5mm) , tap & die (12x1.5mm) , tap & die (14x1.5mm) , tap & die (16x1.5mm) , tap & die( 18x1.5mm) , tap & die (20x1.5mm) , tap & die (22x2.5mm) , tap & die a nf 1/4 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , 5/16 inch , tap & die bsp 5/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch , steel rule 24 inch , reamer (adjustable) size- 22mm to 28mm , reamer (adjustable) size- 28mm to 35mm , reamer (adjustable) size- 35mm to 40mm , reamer (adjustable) size- 38mm to 45mm , straight shank drill bit 10.5 , 12 , 12.5 , 14 , 16 , tapper shank drill bit 16mm , 17.5mm , 18mm , 19mm , 20mm , 22mm , 24mm , 32mm , 45mm , marking block magnetic base with dial gauge (for lathe machine) , hss cutting tool size 1/4x100mm , 3/8x100mm , 1/2x100mm , niddle grinder 600w , drill sleeve 1-2 size , drill sleeve 1-2 size , drill sleeve 3-4 size , cutting disc 1.5x100mm , grinding disc 4x100mm , painting brush 2 inch , 4 inch , helmet mask , writing brush , pilot spray gun (cup type) 1 ltr capacity , nozzle tip cleaner (gas cutting nozzle) , spark lighter , angle grinder light duty 600w , anvil heavy duty (akt 25) , hand drill machine heavy duty 750w (size 1 to 30mm) , bench grinder , criclip plier (in side) , criclip plier (out side) , nose plier 10 inch , socket heavy duty 34 mm , socket heavy duty 55 mm , socket heavy duty 60mm , socket heavy duty 65 mm , socket heavy duty 70mm , socket heavy duty 80mm , injector opening box spanner 24 mm , injector opening box spanner 27 mm , allen key set (in inch) , allen key set (mm) , micro mete 0 to 25mm , micro mete 26 to 50 mm , micro mete 51 to 75 mm , micro mete 76 to 100 mm , dial gauge set for inner bore dia checking 02 mm to 200 mm , hyd pressure gauge test kit 100 to 600 bar , diesel engine compression pressure gauge test kit , mechanical jack 30 inch , pipe wrench 12 inch , fip high pressure line removing/fitting spanner 17 no & 19 no , fip opening ring spanner 14x15 & 12x13 , pre stroke tool for all inline/rotary diesel engine , injector testing pipe for fip test bench (600x6x2) , dropping tube for pump testing , fip test bench mini compressor for testing of pressure boost portable , fip gear removal tool for engine , c type ring spanner 10x11mm & 12x13mm , scissors 12 inch , claw hammer 200 gms , hammer 1/2 kg , hammer 1 kg , hammer 5 kg , chisel 6 inch-9 inch , center punch 4mm x 4 inch , adjustable oil filter wrench , light duty socket set , havy duty socket set , single end spanner 17 , 19 for fitting / removing of injecter pipe , hand press machine 50 ton capacity , bench vice 8 inch heavy duty , light duty drill machine , light duty hand grinder , nose plier 12 inch , electric planner 550w , hand drill machine 800w , electric rotary hammer machine 720w

CTN :40842887

16 Jul, 2025 5.50 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For supply of mechanical tools and mechanical equipment - heavy duty universal trolly jack gear box , workshop tray 36 inch 24 inch 4 inch ss with handle , wrokshop tray 24 inch 24 inch 4inch ss with handle , arc welding machine 300amp , welding holder 600amp , welding earth clamp 600amp , welding gloves leather hand 16inch , han held welding screen shield automatic darking protection , auto darking welding goggle , hammer with wooden handle 2kg 10inch , chipping hammer 150mm long , chisel cold flat 150mm long , pipe wrinch 18inch , pipe wrinch 14inch , centre punch 100mm , centre punch 125mm , centre punch 150mm , screw driver phillips 4inch , screw driver phillips 6inch , screw driver phillips 8inch , screw driver phillips 10inch , battery charger 72volt 15amp , battery load tester and analyzer , battery carring trolly , air compressor 600pond double piston 3hp , spray painting gum 550ml , putty knif with handle 6 piece , measuring tap 10mtr long , de spanner 6mm to 32mm 12 piece , ring spanner 6mm to 32mm , spaner box tubular 10mm to 32mm , combination pilers 10inch , nose plier 8inch , screw driver 10inch , screw driver 8inch , screw driver 6inch , screw driver 4inch , screw driver combination kit , screw driver phillips 8inch 200mm , chisel cold 17mm , chisel cold 19mm , hammer ball pin 02 lbs 800gm , feeler gauge 01 mm to 5mm 26 blade , adjustable wrench 300mm , punch pin 6inch , steel rule 12inch , spark plus spanner m.cycle , file flat bastard 10 inch , file roung smooth 6inch , file flat bastard 6 inch , file square 6 inch , scissors 8 inch , mpfi plug spanner 16mm long with tomy bar , wrench pipe 12inch heavy duty , tool box with lock 21inch long five chamber , almirah steel five rack lock type 6.5 feet , almirah steel six rack lock type 8 feet , bench grirder machine 8 inch 200mm , cordless rivet gun , hydraulic pressure jack 10ton , valve die l type , kit tubeless puncture kit , tommy bar , gauge type pressure , empty first aid box , tyre lever heavy duty , cutting pler 8 inch , spanner de set 12 piece 6x7 to 30x32 , spanner de set 8 piece 8x9 to 21x23 , spanner de set 6 piece 8x9 to 18x19 , spanner adjustable 10 inch , spanner adjustable 8 inch , hammer ball pen 2lbs 800gm , screw driver 10inch plane , screw driver 6 inch plane , file flat bastard 12inch , lamp inspection with 5 meter wire and crocodile clip , pad lock with key , valve die straight , cold flat cheisel 6 inch , toing rop 10inch long , screw drive philips6 inch , tool box steel 21inch long , tyre inflating hose air line

Central Government / Public Sector

CTN :40685457

03 Jul, 2025 24.49 Lacs

Panipat - Haryana

Tender For corrigendum : custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :40701716

08 Jul, 2025 NA

Kota - Rajasthan

Tender For corrigendum : supply of spares parts for airless spray painting machine as per attached annexure "a". ( one set consisting of tc nozzle -05nos., tc nozzle holder-10nos., gun swivel - 20nos., filter cassette 60 mesh-10nos.) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40773560

09 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with continuous gas w